I replaced the deteriorated parts, including 16 transistors and 8 capacitors, and came back to life! The 707 series plays a central role in Sansui. Both sides of the PHONO2 system are MM/MC compatible, and since they are compatible with all MC cartridges, 2 levels of impedance switching between low and high are possible. This is an amplifier I definitely want you to listen to records to your heart's content. There is dullness, scuff marks, and scratches on the corner. Serial 823040462 (Fujisawa Yukishi)
Maintenance information: 2024.11.19 Maintained (AB output relay replacement. Headphone relay replacement. Master volume exchange. Balance, treble, and bass volume exchanges. Switch disassembly and polishing (input selector, recout, tone, 16Hz, 20KHZ, muting, tape, MC transformer, MC cartridge, frequency switching) power supply unit floating resistor replacement. Replace the equalizer, 16 power amplifier transistors, and 8 capacitors. Solder repair. (Internal inspection and cleaning, pin jack polishing, operation confirmation)
Accessories: No accessories
Main specifications: 110W+110W size W460 x H160 x D404 mm weight 15 kg
Maintained! Sansui 07 series 10th anniversary model. It is a model that has achieved a wide range with CD playback in mind. It is an amplifier with sound quality that is compatible with a wide range of sources of all genres, with a strong low frequency typical of Sansui. There are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.11.17 maintained (output relay replacement, selector lamp replacement, power amplifier section adjustment volume replacement, protector part transistor replacement, slide switch disassembly polishing grease application (phono selector, reck-out), push SW decomposition polishing grease application (input selector, tone, subsonic, ride ness, muting, frequency switching), master volume dismantling, cleaning adjustment, etc. Volume cleaning, interior and exterior inspection cleaning, pin jack polishing, adjustment*Relay operation takes 15 to 20 seconds)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) size W466 x H161 x D431 mm weight 21.5 kg
Maintained. The successor that inherited the sound of the D series. A model where you can feel the uniqueness of Sansui at the time in extruding low frequencies and making sounds. They are energetic, playable, and go great with jazz and rock, and are compatible not only with MM but also with MC, making analog fans happy. There are scratches all over the exterior (Mizusaki Ryo)
Maintenance information: 2024.11.5 maintained balance volume replacement. Main volume disassembly cleaning adjustment. Switch disassembly, polishing grease application (input selector, reck-out, tone, subsonic, muting, tape) output relay replacement. Power amplifier circuit transistor, capacitor, adjustment volume replacement. Power supply floating resistor replacement. Solder repair. Other volume cleaning ⑧ Interior and exterior inspection cleaning, adjustment, operation check.
Accessories: none
Main specifications: execution output 80W+80W (8Ω) damping factor 100 rated power consumption 200W phono MM/MC compatible W460 x H160 x D404 mm weight 13.2 kg
Overhauled product including capacitors and transistors! This is an attractive mid-range model in the D series with lots of exciting sounds and thick sounds. It's a different character from modern amplifiers. When paired with speakers such as JBL, you can enjoy vibrant, deep tones. The exterior is in a state where there is a feeling of use such as dullness over time. Serial 219050594 (Yamato Yuki)
Maintenance information: 2024.11.3 maintained (input/output waveform check, load test (1kHz sine wave, 8Ω load: 90W+90W, OK), sound output test) (electrolytic capacitor, mica capacitor, semi-fixed resistor, transistor, relay, SP and RCA terminals, block capacitor replacement, all SW/VR types are completely disassembled, cleaned, and coated with anti-oxidation sulfide grease, after removing old solder from each board, re-solder, flux removal idol, Offset adjustment, interior/exterior cleaning, heat dissipation sheet replacement, various measurements, audio output tests)
Accessories: none
Main specifications: 90W+90W (8Ω) phono 2 systems (MM/MC switching, MM) line input 2 systems, tape system, 2 systems, pre/power separable, W430 x H168 x D428 mm 20.6 kg
※ It is cheap because it is not in good condition. It is sold as a set with the EC-11 enclosure that forms a 2 to 4 way system by mounting the 38cm woofer enclosure EC-10, which was jointly developed by Sansui and JBL. The condition is pain such as aging wounds, dullness, and burning. There is only 1 EC-11 back screw. Some dowels are broken (Sasaki Shota)
Accessories: none
Key Specifications: EC-10 Dimensions: W590xH980xD470mm 48kg EC-11 Dimensions: W980xH300xD470mm 20kg
Maintained! The final model in Sansui's classic 607 series. A sound with a wide range, good balance, and supple yet core. The mid to high range with a high sense of fine particles is particularly attractive. Not only does it make a JBL sound, but it also sounds beautifully with European speakers. There is a feeling of use on the exterior, such as scratches and dirt. Serial 609625399 (Jun Tamai)
Maintenance information: 2024.10.21 maintenance completed (main volume disassembly, cleaning adjustment, operation confirmation running test from a state where grease is not used)
2024.7.12 Maintained (tone, loudness, subsonic, speaker AB switch replacement output relay replacement protector part capacitor replacement input selector, reck-out, processor switch disassembly, polishing grease coating, each volume, switch cleaning, solder repair, internal inspection, cleaning operation confirmation)
Accessories: instruction manual copy power cable
Main specifications: 80W+80W (8Ω) line input, 5 phono inputs (MM/MC switching), 1 system, tape system, 2 systems, rated power consumption 230W, W432 x H165 x D450mm, 19 kg
Maintained in 2023/9. A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.9.20 maintenance (output relay replacement, power amplifier power supply solder main part repair, switch disassembly contact polishing grease application (input selector power amplifier direct source direct tape tone loudness suppressor subsonic), balance VR and other volume switch cleaning, interior and exterior cleaning, adjustment inspection, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
The price has been reduced. 2024/3/17 sales price 2,500 yen. An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a finger-pointing split type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.3.20 Maintained (The mechanical fixing parts were manufactured and replaced in 1 pair. The clamper and loading belt have been replaced. The velocity coil has been repaired and corrected. (The tact switch on the operation panel has been replaced)
Accessories: remote control
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
※Shipping service. No. 58 Special Feature = 3rd “THE STATE OF THE ART: Supreme Component” Award Selection/New JBL 4345 Detailed Report/EMT927 vs. Torrance Reference/Listen to the Tannoy SRM Series/Infinity “IRS” Anatomy/1981.4.15 issued. Posted models: JBL/4345BWX MCINTOSH/MC2500 VICTOR/TT-801, CL-P10, TS-1 MICRO/SX-8000, HS-80 ONKYO/INTEGRA P-309, INTEGRA M-509 MARK LEVINSON/ML-6AL AUDI-Technica/AT-34E11 ENTRE/EC-30 SME/3012-R SPECIAL TECHNICS/EPC-C100CMK3 FIDELTY RESEARCH/XF-1 SELLESION/DITTON300 KEF/MODEL105.4 KENWOOD/L-08C, L-08M PIONEER/A-980 SANSUI/AU-D907F SONY/TA-AX8 LO-D/TU-1000 LUXMAN/PD300 ADC/ASTRION LINN/ASAK/ S56.4.15 issued. The photograph is a sample, so the actual product may be broken, or there may be markings etc.
※Shipping service. Special Issue No. 36 = All Speaker Systems (above) Test of the latest 40 models/Sound Quarterly (listen to new products) /1975.10.1 issue. Published models: CHRYSLER/LAB-1000,2000 YAMAHA/NS-451 ALLISON/ONE, TWO SLESTION/UL6, UL8 OMAL/MODEL TL6 CABASSE/BRIGANTIN INFINITI/2000Ⅱ JENSEN/23 YAMAHA/C-1 SANSUI/AU9900,11000, TU9900 LAX/L-80V TECHNICS/ HY-7600,7200, ST-7600,7200 VICTOR/JA-S91, S71, S51, JT-V71, V51 TRIO/KA-7500, KT-7500 DIATONE/DA-U850, DA-F750, DA-U750 GAS/AMPZILA SAE/MARK2500 ALTEC/9440A RADFORD/HD250, ZD22 DENON/DP-1700, DL-109R ,109D DIATONE/DP-91D YAMAHA/YP-600, YP-1000Ⅱ MICRO/TAKE-5 CEC/BD-7000 OTTO/TP-1200 SANSUI/SR-525 GRACE/G714, G704 DUAL/601,1228,1225. The photograph is a sample, so the actual item may be broken or written on it.
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
An enclosure that seems to be for Sansui's old system component speakers. The lattice box with legs reminiscent of JBL's Baron and Bicount is really fashionable. The lattice on both the left and right is out of the frame. There are traces of internal remodeling (Fujisawa Koshi)
Accessories: None
Main specifications: opening diameter 212mm (screw pitch 240mm), aperture diameter 110mm (countertop 170mm, screw pitch 140mm), opening diameter 95mm (for bass reflex port/wood screw pitch 118mm), aperture diameter 70mm (Countertop 92mm, Screw Pitch 104mm) 14mm Particle Board, Veneer Finish W500 × H665 × D430mm 15kg