Uses the 2.0m power cable “PCOCC-A,” which has a reputation for high sound quality. By using silk thread as an intermediary, it absorbs ultra-fine vibrations and is compatible with high-resolution sound sources in the high sound quality music distribution (HQM) era. It has high S/N, a wide range, good sound loss, and a clear outline, and good visibility, but it's also soft, so I don't feel stressed when listening to it. There are abrasions and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.10.26 continuity confirmed
Accessories: original box
Speaker cable 1.8 m pair terminal has a simple structure that is easy to run without processing. Uses PE insulators and OFC conductor 1.25 scares, which have a reputation for sound quality. The hot side has a square exterior, so you can tell the polarity by touching it. There is no feeling of use and it is generally a beautiful item (Yamato Yuki)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: none
Power cable, 1.0 m PSE standard product, uses Wattgate-5266i+320i as a plug for the power cable made by A2D in the US, and it is a model that is highly evaluated by studio engineers. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: No accessories
Power cable 1.0 m PSE standard product The plug uses WattGate-5266i+320i as a power cable made by A2D in the US, making it a model highly evaluated by studio engineers. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: No accessories
24K gold plating with a purity of 99.9% or higher, used for jewelry use, is applied to the 1.5m power cable terminal to improve conductivity and connection stability. The clear and delicate sound field is nice. The exterior is good with little feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: original box
Uses the 2.0m power cable “PCOCC-A,” which has a reputation for high sound quality. By using silk thread as an intermediary, it absorbs ultra-fine vibrations and is compatible with high-resolution sound sources in the high sound quality music distribution (HQM) era. It has high S/N, a wide range, good sound loss, and a clear outline, and good visibility, but it's also soft, so I don't feel stressed when listening to it. There are abrasions and a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.10.26 continuity confirmed
Accessories: original box
Speaker cable 1.8 m pair end with unprocessed inverted twist structure OFC, high resolution, clear sound. There is no feeling of use and it is generally a beautiful item (Yamato Yuki)
Maintenance information: 2024.10.27 continuity confirmed
Accessories: none
The price has been reduced. 2024/10/25 sales price 180,000 yen power cable 1.5m Mitsubishi Electric Wire Industries is the company's highest-grade cable developed in collaboration with Acro Japan using the conductor material MEXCEL. It fully brings out the performance that an audio system can have, such as musical expressiveness with excellent resolution and sound field spatial expressiveness (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
RCA cable 1.0m pair orthophone 15th anniversary commemorative product, sterling silver 4-core RCA cable, premium rhodium plated, original correct chuck connector- The soft, stretchy mid-high range is ideal for classical music and vocal reproduction. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
Phono cable is an audio cable that uses a double 2-core shield to achieve the same potential on the left and right of the 1.0m pair of RCA terminals. This cable has straightforward sound quality and is easy to use. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.10.24 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 0.5 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
The 5.0 m digital/line RCA cable uses D.U.C.C. StressFree7NCU developed by Mitsubishi Electric Wire Industries, Ltd. High quality digital cable with luxurious materials, such as direct rhodium-plated terminals (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
1.5m power cable A high-end cable using a real 6N copper stress-free conductor that has obtained the highest accuracy with a GD-MS micro measurement device. Uses original plug and connector with special phosphor copper processing. Standard cable that enables transparent and extremely stress-free playback (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
The 2.0m power cable is the company's highest-grade power cable. Equipped with a unique flux power conditioner circuit, all noise emitted from digital devices is reduced, and the sense of transparency is overwhelmingly different from other models. ※The conditioner part remains dirty (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
Balance cable, 1.0 m pair, stress-free 6N conductor, thicker than AcroLink, and has a natural texture that shines with good balance. This character is compatible with a wide range of devices. The exterior has dirt and chips at the root of the terminal (Murakoshi Yoichi)
Maintenance information: 2024.10.25 continuity confirmed
Accessories: none
A rare phono cable! RCA plug on both ends 1.4m, 7-layer TSW construction You can relax and enjoy analog records with the thick, supple sound quality typical of an orthophone. There are small scratches on the exterior and separator (Murakoshi Yoichi)
Maintenance information: 2024.10.18 continuity confirmed
Accessories: none
Balance cable, 1.0 m pair, 7NOFC, PCOCC rhodome plated plug, and the extra thick sheath is eye-catching, but while getting a wide range, resolution, and sense of volume typical of a 7N, it plays music naturally with sound and afterglow without feeling tight at all (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
Speaker cable 2.0m pair end is an Acrolink standard speaker cable that uses a banana banana floating shield system. Crisp, clear sound. The tightness is attractive because it feels tight yet smooth (Murakoshi Yoichi)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: none
The 6.0m pair RCA cable is a custom-made 8N cable that uses 50 beryllium copper for the center pin and phosphor bronze, which is highly regarded for its high sound quality and high evaluation, on the cold side, so it is a luxurious 8N cable that puts a solid cost on vibration damping. There is a feeling of use such as tape on the root of the plug, missing letters on the sheath (Yoichi Murakoshi)
Maintenance information: 2024.10.18 continuity confirmed
Accessories: none
Speaker cable 1.8 m pair Y lug specification speaker cable that meets the strict requirements of professional environments such as recording sites. It features a straight, uncolored sound. Some parts are green and have some stickiness (Satoshi Yonejima)
Maintenance information: 2024.9.25 continuity confirmed
Accessories: none
An insulator and magnetic flux tube are passed through the center of the 3.0 m Y lug specification conductor to prevent the effects of signals due to disturbances in the magnetic field. It is a character with a thick sound that feels lively (Tamura Eiji)
Maintenance information: 2024.10.23 continuity confirmed
Accessories: none
The details of the 3.0 m pair of RCA cables are unknown, but they are soft and easy to handle. There is tension in the sound. There is dirt or discoloration on the sticker (Tamura Eiji)
Maintenance information: 2024.10.23 continuity confirmed
Accessories: none
The price has been reduced. 2024/9/29 sales price 5,000 yen. Speaker cable 1.0m pair terminals tend to be unprocessed, soft, and thick, so you can enjoy sound that is calm and easy to listen to. Parallel multi-stranded wire structure core wire material: SCMC-OFC+LSC hybrid type number of core wires used: 296 strands x 1 pair outer skin material: HULLIFLEX list price 4,760 yen/m exterior, room odor, etc., and a sense of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.9.29 Continuity confirmed
Accessories: none
Comes with a 1.3 m connector for the extension speaker cable dedicated to the company's musicalizer ML-206. There is fading on the case (Kanai Hidetsugu)
Maintenance information: 2024.10.22 continuity confirmed
Accessories: instruction manual, original box
Jumper cables, set of 4, 19cm, banana-banana specification, Onkodo jumper cables. The cable is MOGAMI 3103, and the banana plug is ONKODO BP-312GC (Takasaki Atsushi)
Maintenance information: 2024.10.22 continuity confirmed
Accessories: none
Speaker cable, 2.0m pair, EQS5, single wire specification, spade terminal on both ends, Ritz coating, OFC conductor, 2-core, perfectly symmetrical coaxial structure, standard model of the company's speaker cable. The clear spatial expression typical of Wire World is attractive. There is discoloration on the plug and sheath (Kojima Yosuke)
Accessories: none
Balance cable, 1.0 m pair, 4 types of hybrid conductors, 4 cores, double shield structure, this is a cost-effective cable where you can feel the commitment to zonotone everywhere. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.20 Continuity confirmed
Accessories: none
For the 2.1 m pair of untreated conductors at the end of the speaker cable, 4 types of materials with excellent sound, mainly high-purity 6NCU, were selected. The deep low frequencies and dynamic playback sound are attractive. In addition to rubbing and dirt on the exterior and sheath, dullness and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.10.20 Continuity confirmed
Accessories: none
RCA cable is a 1.0 m pair of hybrid conductors centered on 7N copper, and the contact part is a standard model with rhodium plating, and it is a cable with characteristics suitable for jazz because it has a sense of sound pressure in the mid-range range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.10.13 continuity confirmed
Accessories: none
It is a high-speed, cohesive, and easy-to-listen cable with a MWT structure in which the plug is attached to the 1.0m RCA cable sold out cable, and the conductor is arranged without gaps around the high-purity copper conductor core material. It is dull and has a feeling of use. (FUJISAWA KOSHI)
Maintenance information: 2024.10.19 continuity confirmed
Accessories: No accessories
RCA cable is a SAEC name cable designed to be optimal for 3.0 m rhodium-plated plug amplifiers with an output impedance of 100 to 600 ohms. In addition to stickiness on the exterior, sheath, and plug, dullness and a feeling of use can be observed (Kobayashi Hitoshi)
Maintenance information: 2024.10.13 continuity confirmed
Accessories: none
7.0m pair of XLR cables, 3-core construction, Neutrik balance plug, 3-pin specification. The sound is thick and solid throughout the entire range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.10.13 continuity confirmed
Accessories: none
Comes with original box. The degree is good. Equipped with Oyaide Electric's original non-magnetic noise suppression tape “NRF-005T,” which uses Pulshut developed by Asahi Kasei Corporation, a 2.0m pair speaker cable. It is a speaker cable that achieves both the dynamism of music and the fidelity of the original sound (Sasaki Shota)
Accessories: original box
Main specifications: C.I.S (Cross Stabilizer) structure banana plug SGBN (phosphor bronze material, pure silver plated base/thick 24K gold plating)
The price has been reduced! 2024/9/28 sales price 11,000 yen 500 series power cable that follows the development philosophy of the company's highest-level FLUAT700 series by removing residual stress from within the cable using a 0.7 m PCUHD+HYPER OFC hybrid conductor and heat relief treatment to create a sound with an emphasis on low frequencies with a tight sense of volume and sound images emerging in front of you. (FUJISAWA KOSHI)
Maintenance information: 2024.9.28 continuity confirmed
Accessories: instruction manual, original box
Speaker cable 2.8 m pair terminal A speaker cable that uses an LC-OFC conductor with few unprocessed habits. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.10.8 continuity confirmed
Accessories: none
The 1.0m pair of untreated speaker cable stretches well in the high range and has a soft and careful European tone in the mid and low frequencies. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.29 Continuity confirmed
Accessories: none
※Only 1 speaker cable has a 2.0m end, and the unprocessed high range stretches well, and the mid to low frequencies has a soft and careful European tone. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.29 Continuity confirmed
Accessories: none
※Only one speaker cable, 3.0 m, has good stretch in the high range, and the mid and low frequencies have a soft and careful European tone. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.9.29 Continuity confirmed
Accessories: none
An insulator and magnetic flux tube are passed through the center of the terminator conductor on one side of the 3.0 m speaker cable to prevent the effects of signals due to disturbances in the magnetic field. A character with a thick sound and a sense of vibrancy. You can enjoy using it. There is a lot of feeling of use on the exterior, such as friction and dullness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.9.29 continuity confirmed
Accessories: none
Digital coaxial BNC cables enable reliable transmission with minimal attenuation on 75Ω transmission lines, from low frequency applications such as audio transmission to high frequency applications such as video and digital audio (Asaine Satoshi Method)
Maintenance information: 2024.10.5 continuity confirmed
Accessories: none
It is a firm conductor cable with a shape similar to the 0.7 m pair of RCA cables and Siltec cables. There is a feeling of use on the exterior, such as dullness and writing (Tamai Jun)
Maintenance information: 2024.10.5 continuity confirmed
Accessories: none
An insulator and magnetic flux tube are passed through the center of the terminator conductor through the 3.0 m speaker cable terminal to prevent the effects of signals due to disturbances in the magnetic field. A character with a thick sound that feels lively. You can enjoy using it. The exterior is sticky to the sheath, and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.9.29 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/7/21 sales price 2,500 yen. Speaker cable is a 1.4 m pair 6N/5N high-purity copper hybrid multi-conductor cable, and is an Ortofon low cost model. There are scratches and dullness on the shield (Takasaki Atsushi)
Maintenance information: 2024.7.21 continuity confirmed
Accessories: none
The price has been reduced. 2024/10/2 sales price 1,800 yen. Stereo mini plug to RCA conversion cable 0.7 m conversion cable that connects the earphone terminal to the RCA terminal. A hybrid 2-way configuration using a titanium-containing sheath, PCOCC on the low range side, and a high class OFC conductor on the high range side. There is dullness and a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.9.29 continuity confirmed
Accessories: none
1 bottle only. The 2.7 m end of the speaker cable uses tinned x 756 5N high-purity conductors as the untreated conductor, and a non-flammable anti-vibration PVC/metal flexible pipe is used as the coating, making it a profound sound where freshness and softness coexist. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.29 Continuity confirmed
Accessories: none
The 1.5m pair of untreated conductors are tinned x 756 5N high-purity conductors, and a non-flammable, anti-vibration PVC/metal flexible pipe is used as the coating, making it a profound sound where freshness and softness coexist. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.9.29 Continuity confirmed
Accessories: none
The 1.0m LAN cable is a Buffalo high-resolution compatible cable called the “Ethernet Cable for the Hi-Res Network Audio Era.” (FUJISAWA KOSHI)
Maintenance information: 2024.9.28 continuity confirmed
Accessories: No accessories
The price has been drastically reduced. 2024/8/25 sales price 4,800 yen. RCA cable, 1.0 m pair, line cable using hybrid conductors of PCOCC and OFC. There is an appearance, dullness, and a feeling of use (Katsuji Hiura)
Maintenance information: 2024.8.23 continuity confirmed
Accessories: none