Comes with a remote control. Line-only pre-main amplifier. The output stage is a single-ended, ultra-linear connection that makes the most simple use of the EL34. It has a bright sound unique to vacuum tubes, and is a gem that is still popular today. You can enjoy the glossy, rich tone that sets it apart from recent vacuum tube amplifiers. It can also be said that it is an attractive product for interior decoration. The exterior is dull and small scratches can be seen. Serial 430037 (Yonejima Satoshi)
Maintenance information: 2024.11.20 Operation confirmed
Accessories: instruction manual, power cord, remote control
Main specifications: output 12W+12W grade A single W275 x H165 x D375 mm 14.0 kg
The price has been drastically reduced! 2024/11/15 sales price 248,000 yen 2024/8 maintenance completed! Vacuum tube pre-main amplifier with a built-in authentic PHONO equalizer. Uesugi's beautiful, pleasant sound makes vocals and stringed instruments sound lustrous. It has a triode tube connection PP configuration with driving power, and there are plenty of mid to low ranges. The exterior has small scratches and a feeling of use such as dullness. Serial 021 (Tomonori Asaine)
Maintenance information: 2024.8.5 maintained (balance VR, main VR, phase reversal vacuum tube, each replacement, damaged screw replacement, screw hole correction, vacuum tube pin cleaning, foreign matter removal bias and output sound check)
Accessories: none
Main specifications: 6CA7 specification output 20W+20W PHONO (MM) input W445 × H170 × D432 mm weight 22 kg
Limited edition of 120 units sold to commemorate the 20th anniversary of Triode's establishment. The 2A3 is mounted by push-pull. In addition to the luster of the mid to high range unique to vacuum tubes, you can also clearly feel the strength of the low range. You can enjoy music sitting on your back with an output of 10W+10W or more. The exterior is also in good condition with no noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: power cable, instruction manual
Main specifications: 2A3 AB grade push-pull vacuum tubes, 2A3 x 4, 6SN7 x 4, rated output 10W+10W (8Ω), frequency characteristics, 10 Hz to 60 kHz, dimensions W400 x H205 x D470 mm, weight 25 kg
Arrived for the first time in 6 years! Single amplifier using a triode EL519. The clear high range, which has a unique sense of transparency, and the middle range, which is rich in nuances without turbidity, are attractive. It is an amplifier with an unrivaled personality that has a sense of power and can also express the afterglow of a spherical sound. There are small scratches and dullness on the volume and input selector knobs (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: power cable
Main specifications: 14.5W+14.5W (8Ω) vacuum tube EL519×2/PCC88×2/ECC85×2 W400×H150×D400mm 20kg
I replaced the deteriorated parts, including 16 transistors and 8 capacitors, and came back to life! The 707 series plays a central role in Sansui. Both sides of the PHONO2 system are MM/MC compatible, and since they are compatible with all MC cartridges, 2 levels of impedance switching between low and high are possible. This is an amplifier I definitely want you to listen to records to your heart's content. There is dullness, scuff marks, and scratches on the corner. Serial 823040462 (Fujisawa Yukishi)
Maintenance information: 2024.11.19 Maintained (AB output relay replacement. Headphone relay replacement. Master volume exchange. Balance, treble, and bass volume exchanges. Switch disassembly and polishing (input selector, recout, tone, 16Hz, 20KHZ, muting, tape, MC transformer, MC cartridge, frequency switching) power supply unit floating resistor replacement. Replace the equalizer, 16 power amplifier transistors, and 8 capacitors. Solder repair. (Internal inspection and cleaning, pin jack polishing, operation confirmation)
Accessories: No accessories
Main specifications: 110W+110W size W460 x H160 x D404 mm weight 15 kg
This is a product that has undergone thorough maintenance, such as 50 CA10 pairs, 10 capacitors replaced, and the entire volume and lever switch dismantled and polished! Please experience not only the sound, but also the impressive volume and feel of the switch. The final model in the LUX38 series, a rare model limited to 300 units. This is the last work of Uehara Susumu, who has consistently designed the 38 series until then, and is characterized by a sense of luxury and a soft, enveloping atmosphere. There are traces of cabinet repairs, but overall it is a beautiful individual (Oikawa Tetsuji)
Maintenance information: 2024.11.13 Maintained (vacuum tube, vacuum tube socket, fuse, semi-fixed resistor, deteriorated electrolytic capacitor, tantalum capacitor, LED, spark killer, resistor replacement. All switches and volumes were completely disassembled and cleaned. Input/output waveform confirmation, rated output test (1kHz sine wave, 8Ω load: 25W+25W, OK), sound output test)
Accessories: none
Main specifications: 30W+30W (8Ω) W490 x H202 x D350 mm 24 kg