This is a 5-layer audio board. It combines high rigidity, high specific gravity, and high damping properties, and strongly prevents floor noise. It is ideal for installing large speakers, etc., and has a sense of volume and adjusts mids and bass in a well-balanced manner. There are scratches and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W750×H55×D600mm 18.5kg
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. There are dirt and small scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
Set of 2 Taock audio board It has a 5-layer structure with cast iron sandwiched between MDF and oak veneer attached to the surface material. It can be expected to prevent floor noise and improve sound quality. There are scratches and threads on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: MDF main material W500 x D450 x H55 mm 9 kg
Set of 8 gradation cast iron insulators In addition to setting up small speakers, etc., it can be used in a wide range of ways, such as when setting AV devices in places where resonance is easy, such as on a shelf. There is a slight feeling of use on the exterior (Mizushima Itsuro)
Accessories: original box
Key Specifications: Gradation cast iron, matte black finish, diameter 50 x H20 mm, weight 250 g per piece
A speaker stand that controls vibration damping and vibration isolation in a well-balanced manner. Black metallic finish It brings out the clear, speedy sound that is characteristic of small speakers and the original performance of the speaker. The exterior has dullness and scratches (Tamura Eiji)
Accessories: spike, spike set
Main specifications: top plate W174 x D260 mm bottom plate W250 x D300 mm height 600 mm (including spikes) 9 kg/1 unit
Set of 4 spike plates from TAOC It is placed under spike-shaped legs to prevent damage to the floor and is effective in damping and stabilizing vibration. Stable mid and low frequencies can be obtained. Spike marks are conspicuous on the exterior, and the original box is also damaged (Mizusaki Ryo)
Accessories: original box
Main specifications: gradation cast iron diameter 40×H16mm 130g/piece
Set of 4 spike plates from TAOC It is placed under spike-shaped legs to prevent damage to the floor and is effective in damping and stabilizing vibration. Stable mid and low frequencies can be obtained. Spike marks are conspicuous on the exterior, and the original box is also damaged (Mizusaki Ryo)
Accessories: original box
Main specifications: gradation cast iron diameter 40×H16mm 130g/piece
Maintained! 50Hz specification Mount the Ortofon RMG212 to the 301, which has a thick and powerful tone unique to idler drives. Enjoy the unique luster and rich vintage sound with the GARRAD turntable that brings out the power of the SPU to the fullest. There are scratches and scratches on the exterior. Also, TAOC insulators are attached to the legs. Serial 43318 (Yonejima Satoshi)
Maintenance information: 2024.10.9 Maintained (input AC relay inlet removed. Motor disassembly/internal check, cleaning, lubrication, assembly adjustment. Main bearing disassembly, cleaning, oil lubrication, sealant application, assembly. Motor suspension spring rubber deterioration replacement. idler cleaning. The speed adjustment link spring was replaced with a new one due to deterioration in elongation. Main body mounting mount rubber washer deterioration replacement and installation. Oil felt replacement. “Zero balance” adjustment with RMG212 main weight 32g dead weight. Output cable L/R correction. Contact cleaning. Continuity check. Transit screw stopper circlip missing and added. (Running test OK)
Accessories: connection cord
Main specifications: [301] idler drive 33, 45, 78 rotations compatible with 50 Hz [RMG212] tone arm dynamic balance type, total length 300 mm, execution length 228 mm, over hang 16 mm, needle pressure range 0 to 7.5 g, direct reading arm base hole 22 mm, cartridge dead weight 7 to 32 g, W500 x H180 x D400 mm
Tawk's thin audio board. Sandwich structure with high density wood board, surface material, and back surface material centered around a honeycomb core containing cast iron powder. It is a heavy board that combines high rigidity, high specific gravity, and high vibration damping properties, and suppresses floor softness. “W” type with warm, soft sound quality. The exterior has scratches, dents, cracks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W495 x H26 x D445 mm 6 kg