Add search
Manufacture | Model/Title | Price | Arrival date

A3500Japan

Ask 24-44138-21466-00
A3500
Manufacture:LUXKIT
Original price: JPY 79,800
Price: JPY 143,636
Japan 1972 made
Arrival: 2024-09-27 19:58:43
description
Refreshed and maintained in 2022. Luxe Kit's 6CA7 stereo power amplifier A3500. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. The exterior has rust, dullness, and small scratches on the trans (Murakoshi Yoichi) Maintenance information: 2022.12.2 maintained (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR replacement. Load test (8Ω load 1kHz 35W+35W), input/output waveform check, sound output check performed.) Accessories: instruction manual (copy) Main specifications: 40W+40W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg

A3032Japan

Ask 23-40484-20227-00
A3032
Manufacture:LUXKIT
Original price: JPY 88,000
Price: JPY 107,273
Japan 1976 made
Arrival: 2024-09-22 20:15:36
description
The disposal price has been reduced! (Member prices are not applicable) 2024/9/22 sales price 148,000 yen All switches have been disassembled and maintained, such as contact polishing! Comes with a cabinet. A preamp kit based on LUXMAN's CL32 tube control amplifier. It is designed so that the distortion ratio can be kept low. The fact that it is thin and stylish is also eye-catching. On the exterior, scratches are conspicuous on the VOL. Serial 006141 (Tamura Eiji) Maintenance information: 2024.9.22 Maintained (all switch disassembly contacts polished contact grease applied. Volume disassembly operation contact polishing and cleaning. Replace the power inlet with a 3P terminal and replace the AC cord. Vacuum tube socket contact check. Condenser check. (Maintenance replaced) Each input/output operation was checked) 2021.10.12 manufacturer maintained (lead wire solder deterioration correction, volume base. Phono equalizer wrap ring capacitor defective replacement. Replace all other coupling capacitors that have deteriorated. (Other checks OK, some contacts cleaned) Accessories: power cable Main specifications: Phono 2 system W480 x H115 x D325 mm weight 7.0 kg

A805Japan

This item has been sold.You can't purchase now. 24-43982-20256-00
A805
Manufacture:LUXKIT
Original price: JPY 24,000
Price: JPY 9,091 Sold Out
Japan 1980 made
Arrival: 2024-09-25 19:51:53
description
This is a graphic equalizer for Luxe Kit. The equalizing effect can be switched between ± 6 dB/± 12 dB. Since the left and right sides are independent, settings can be changed on each channel. The exterior has dullness and paint peeling. Serial 907277 (Tamura Eiji) Maintenance information: 2024.9.25 Operation confirmed Accessories: none Main specifications: W290 x H80 x D142 mm 2.4 kg

A3032Japan

This item has been sold.You can't purchase now. 22-35759-39156-00
A3032
Manufacture:LUXKIT
Original price: JPY 88,000
Price: JPY 90,727 Sold Out
Japan 1976 made
Arrival: 2024-09-17 19:04:20
description
The disposal price has been reduced! (Not eligible for member discounts) 2024/9/13 sales price 138,000 yen Maintained! A preamp kit incorporating LUXMAN's CL32 tube control amplifier. It is designed so that the distortion ratio can be kept low. The fact that it is thin and stylish is also eye-catching. As for the exterior, there are stains and threads on the top plate. Serial 904151 (Tamura Eiji) Maintenance information: 2024.9.13 Maintained (All switches have been disassembled, polished, cleaned, and greased. Volume disassembly, movable contact polishing and cleaning. Seven vacuum tube sockets were replaced due to poor contact noise. I replaced 4 electrolyte condensers due to liquid leaks. 14 film capacitors have been replaced. Each input/output operation was checked.) Accessories: power cord Main specifications: Phono2 system W438 x H77 x D322 mm weight 5.7 kg

KMQ60Japan

Ask 23-39866-15012-00
KMQ60
Manufacture:LUXKIT
Original price: JPY 62,000
Price: JPY 143,636
Japan 1969 made
Arrival: 2024-07-11 20:02:04
description
Maintenance was carried out with attention to detail, such as replacing capacitors and replacing SP terminals! A kit model of a power amplifier using a 50CA10 3-pole output tube and an OY15 type output transformer, composed of circuits and parts conforming to the MQ60 type, which has been evaluated by LUXMAN. The sound of a vacuum tube has a sense of volume that seems to meet expectations, and it gently envelops you. The sound, which doesn't require scale, is particularly unique, and the slight thickness that spreads from below the mid-range makes you feel comfortable. The exterior has rust, oxidation, and scratches. Serial 574788 (Tamura Eiji) Maintenance information: 2024.7.11 Maintained (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. Check input/output waveforms and perform sound output checks. Impedance switching SW, gain VOL complete disassembly, contact refinement, and application of grease to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (1 kHz sine wave, at 8 ohm load: 27W+27W, actual measurement), sound output test) Accessories: No accessories Main specifications: 30W+30W 50CA10 push pull W410 x H160 x D205 mm 13.8 kg

KMQ60Japan

Ask 22-37030-49205-00
KMQ60
Manufacture:LUXKIT
Original price: JPY 62,000
Price: JPY 143,636
Japan 1969 made
Shop: Osu shop
Arrival: 2024-06-21 20:03:19
description
Fully restored! A kit model of a power amplifier using a 50CA10 3-pole output tube and an OY15 type output transformer, composed of circuits and parts conforming to the MQ60 type, which has been evaluated by LUXMAN. The sound of a vacuum tube has a sense of volume that seems to meet expectations, and it gently envelops you. The sound, which doesn't require scale, is particularly unique, and the slight thickness that spreads from below the mid-range makes you feel comfortable. The exterior is dull, rust, abrasions, etc., and there is a feeling of use (Ryo Mizusaki) Maintenance information: 2024.6.21 Maintained (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. Load test (8Ω load 1kHz 24.5W+24.5W), input/output waveform confirmation, impedance switching SW/gain VOL disassembly contact refinement, oxidation and vulcanization prevention grease coating. Input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 28 W+28 W, actual measurement), sound output test) Accessories: copy of instruction manual Main specifications: 30W+30W 50CA10 push pull W410 x H160 x D205 mm 13.8 kg

A2500Japan

This item has been sold.You can't purchase now. 19-22362-31051-00
A2500
Manufacture:LUXKIT
Original price: JPY 42,100
Price: JPY 152,727 Sold Out
Japan 1972 made
Arrival: 2019-06-15 20:13:43
description
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya) Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK) Accessories: instruction manual Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out