Maintained! JBL masterpiece 375. It is built into a number of famous machines to create a rich sound. In particular, the sense of energy and density in the middle due to the rolled edge is excellent, and the vocals are sensual. The treble that stretches without impacting your ears is also attractive (Daiki Goto)
Maintenance information: 2024.7.2 maintained (diaphragm disconnection adjustment, pad dampener and mounting screw rust replacement, distribution terminal contact part cleaning, terminal dirt cleaning, insulating bushing replacement, diaphragm stain cleaning DCR (21067/8.3 ohm diaphragm scratch), DCR (24539/8.3 ohm diaphragm scratch not))
Accessories: original box
Main specifications: 2 inch driver frequency band 500 Hz to 10 kHz crossover 500 Hz or higher sound pressure level 108 dB impedance 16 ohms diameter 180 x depth 130 mm weight 11.8 kg/book
Speaker cable uses a 1.5m pair of untreated 6N high-purity copper thick aluminum wrap shields, and is a speaker cable with an excellent balance between the warmth of the sound of 6N copper and elongation in the high frequency range due to the silver coating. There is a slight stickiness. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
This model features an enclosure made of solid mahogany. Luxurious designs with particular attention to materials, such as woofers that use Kurt Müller cones and tweeters that use double feather silk soft domes. It has high musicality and reproduces sound quality that is natural and easy to hear. There is a scratch on the top plate. Serial 11103379, 06102975 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual, saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, anti-magnetic type, W200 x H343 x D263 mm, weight 8.0 kg/book
Add a picture of the manual
A floor-type speaker with an authentic 3-way configuration with all-round appeal, from pure audio to theaters. The wide range playback has a sense of volume, and there is an exhilarating feeling that you can drop out the mids and highs that are particularly calm and easy to hear. The exterior is dull serial NO.I127588 I127593 (Watanabe Yuji)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual saran net jumper plate
Main specifications: 3-way bass reflex type (non-magnetic) playback frequency band 45 Hz to 50 kHz impedance 6 ohms sound pressure level 89 dB W354 x H1,012 x D374 mm weight 25.0 kg
Maintained, new dust cover created, SHURE M44G included, S-shaped arm. An auto lift-up player with an automatic lift-up function when playback is over. The cabinet has a sense of luxury, and the sound quality is authentic, with a thickness unique to that time. The exterior has dullness, small scratches, etc., and a feeling of use can be seen. Serial 1512931 (Tomonori Asaine)
Maintenance information: 2024.7.2 maintained (PU code, 2 CDS for auto lift replaced. Arm disassembly cleaning, sound test. (Create a new dust cover)
Accessories: shell MG-10, cartridge SHURE M44G, copy of instruction manual
Main specifications: tone arm with static balance type electronic damping mechanism inner rotor type high torque AC servo motor needle pressure variable range 0 to 3 g W490 x H219 x 410 mm 15 kg
The price has been reduced. 2024/6/27 sales price 24,800 yen For the first time in this class, silver wire and a solid oval needle were used as power generation coils. Also, the combination of the Boron cantilever used only in higher-level models and the Shibata needle stylus tip is excellent, and by combining this with an Aucurum (gold-plated 6N high purity conductor) power generation coil, the sound is one rank higher. The sound creation, which has a wide range yet is also moist, is truly amazing. The cantilever is leaning towards the right. Also, there is a slight crack on the back (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV frequency band 20 Hz to 25,000 Hz needle pressure 2.3 g dead weight 9 g impedance 20 ohms
※1 bottle only. Speaker cable 2.0m is a standard BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and features a tight sound (Murakoshi Yoichi)
Maintenance information: 2024.3.29 continuity confirmed
Accessories: none
The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output)
Accessories: remote control, instruction manual, power cord
Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg
This model uses PCOCC material for the internal wiring of the AT33 series, a standard model of domestic MC cartridges along with the DL-103, and has acquired even greater transparency. The wide range and clear contours are also the appeal of the 33 series. The exterior has a feeling of use such as dullness and dirt on the body (Sasaki Shota)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: needle cover
Main specifications: MC type playback frequency band 15 to 50,000 Hz output 0.4 mV needle pressure 1.2 to 1.8 g impedance 17 ohms dead weight 6.8 g
The price has been drastically reduced. 2024/6/29 sales price 298,000 yen Maintained including 2ch/4ch heads. 4TR-4ch head unit JT-2044T included! A tape deck with a separate design that completely separates the tape transport and control amplifier. It uses a tape speed of 38 cm/s, has wide frequency characteristics and dynamic range, and achieves a high signal-to-noise ratio. A size 10 reel can be used. It is also compatible with the 4ch stereo that was popular at the time (another TAU-11 is required). The exterior has scratches, dullness, and corrosion appropriate to the model year.
Maintenance information: 2024.6.25 Maintained (mechanical partial cleaning, oil grease application, counter belt replacement. Transport part volume contact cleaning, switch contact disassembly cleaning. Replace 40 amplifier deterioration tongisters and adjust playback and recording levels. Mirror polishing treatment due to surface rust and wear steps on the recording and playback head. 4TR,2TR head maintenance completed. (Refill 3 missing attached pin cords, replace power cords due to deterioration)
Accessories: 4TR-4ch head unit JT-2044T, connection cable, power cable
Main specifications: 38 cm/s, 19 cm/s compatible frequency characteristics: 38 cm/sec: 30 to 28,000 Hz 19 cm/sec: 40 to 20,000 Hz RTU-11: W460 × H411 × D246 mm 22.3 kg TAU-11: W460 × H141 × D246 mm 5.2 kg
The price has been reduced. 2024/7/1 sales price 558,000 yen Mark Levinson's 5ch power amplifier. From input to output, it is a power amplifier with a simple and reasonable internal configuration that combines a fully balanced mono power amplifier circuit composed of the shortest condensed signal path and a powerful power supply circuit. There are some scratches on the front panel top plate surface and the heat dissipation fins on the top plate side, and there are some cracks in the speaker terminal cover (Kojima Yosuke)
Maintenance information: 2024.7.1 operation confirmed
Accessories: instruction manual, power cable
Main specifications: output 200W (8Ω) x 5 input terminals RCA-XLR x 5 (input changeover switch type for each channel) W451 x H194 x D504 mm 40.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/16 sales price 378,000 yen ※The power supply section has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The disposal price has been reduced! Member prices are not applicable. 2024/6/28 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product from 20.5. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. *The positions of the SN.689 output terminals are reversed in red and black. *To connect to a speaker, connect the red output terminal to the positive side of the speaker and the black output terminal to the negative side of the speaker. Serial 689, 690 (Fujisawa Yukishi)
Maintenance information: 2024.6.28 Maintained (transistor/resistor replacement) 2024.4.4 Maintained (replacement of deteriorated parts. Solder deterioration area re-soldering treatment (solder removed/new solder after cleaning) DC voltage/DC offset voltage/idling current/other inspection adjustments. Short plug refill. The red and black positions of the 689 output terminals are reversed, but they cannot be replaced. (This is an upgraded product from NO.20.5L (6212/6213))
Accessories: copy of instruction manual, power cord, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The price has been drastically reduced. 2024/6/18 sales price 138,000 yen manufacturer maintenance completed! Luxman primen amplifier. It is an excellent unit with a fine mid-range unique to pure Class A amplifiers. Even difficult sources such as string music, female vocals, etc. are played in a glamorous manner. There is a feeling of use due to appearance, dullness, paint deterioration, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Maintenance completed (phono changeover switch/cartridge switch disassembly and cleaning, cleaning of other contacts, solder correction and readjustment, contact cleaning because the turnover switch is out of stock ※ there is some noise at present)
Accessories: copy of instruction manual
Main Specifications: 50W+50W (8Ω) Class A Operation DuoBeta Circuit S Pre-heating Function Line Phase Sensor Mount Frequency Characteristics 10 to 100 kHz Dimensions W453 x H174 x D460 mm Weight 21.4 kg
The edge has been softened! Diaton's classic 1000 series has a reputation for its sense of cohesion throughout the entire band. Boron is used for the scoker and tweeter, and the transparency of medium and treble sounds is outstanding. The sparkling, glossy tone goes great with vocals. There are some threads on the exterior. Serial 17875, 17880 (Fujisawa Yukishi)
Maintenance Information: 2023.12.13 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed impedance 6.3 ohms, sound pressure level 90 dB, W360 x H690 x D341 mm, weight 29 kg/book
※6 month warranty Adopts Denon's traditional AL32 processing CD player. Sound full of life was achieved by adopting high-quality parts that greatly surpassed the previous 755 series, such as adopting the company's exclusive custom capacitors incorporating SX1 technology. Serial BLH271911016 (Hiura Katsuji)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: remote control
Main specifications: analog output RCA1 system, digital optical 1 system W434 x H107 x D275 mm 4.3 kg
Pure Class A stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. In addition to the sense of power and the power of the bass, I still feel attractive in the mid-high range, which has contours and stretches. There are scratches, dirt, and front threads on the top plate (Daiki Goto)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
It is an attractive acoustic panel with a design that combines functionality and interior features. It can be expected to have the effect of removing excessive reflections and sound turbidity in the room. The exterior is dirty on the reverse side, and the logo sticker is peeling off (Ryo Mizusaki)
Accessories: none
Main specifications: W250×H250×D33mm, weight 400g/sheet
A bespoke woodworking shop, creative shed speaker stand. It also has a sense of rigidity, and the chic design is attractive. There is a feeling of use such as scratches (Ryo Mizusaki)
Accessories: none
Main specifications: W362 x H302 x D302 weight 5,5 kg
The disposal price has been reduced. (Member prices are not applicable) 2024/6/23 sales price 598,000 yen ※This is an upgraded product from DS/K1. A model equipped with KATALIST that has adopted a new clock architecture. Similar to the higher-level model KLIMAX DS/3, DSD can now also be played natively, and the range of playback has greatly expanded. It is a degree of perfection that is close to the height of KLIMAX DS, such as improvements in power supply to the DAC and processor sections by examining the circuit layout. There are dirt marks on the exterior. Genuine Rin Japan. Serial 1274665 (Tamura Eiji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: remote control, power cable
Main specifications: Playback formats: DSF, DFF, FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS (same as DS and other models) Compatible resolution: 7.35-192 kHz, 16-24 bit (similar to DS and other models) DSD64 (2.8224 MHz) /DSD128 (5.6448 MHz) compatible analog audio output: XLR balanced, RCA unbalanced (fixed/variable output) Digital audio output: 75Ω, BNC, 1 line, EXAKT LINK2 system, W380 x D380 x H91 mm, 5.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 Maintained (end sensor circuit tantalum capacitor replacement, end detection operation check)
2024.6.9 Maintained (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, adapter, oil case, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
※Surface deterioration is noticeable, so it is inexpensive. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. The rigidity is high and low frequency tightness can be expected. The exterior has oxidation and dullness on the metal surface (Satoshi Yonejima)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: No accessories
Main specifications: Die-cast aluminum, self-weight 10.6 g
Set of 6 multi-use carbon pipes The extra-thick CFRP pipe with a thickness of 3 mm quickly treats unnecessary vibrations. It can also be used with the company's STB-MSX stabilizer. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: outer diameter: 20 mm, inner diameter: 14 mm, wall thickness: 3 mm, height: 17 mm (pipe shape), load capacity: 500 kg/piece
Speaker cable 1.9 m pair ends untreated. A new conductor made by mixing high-purity 6NCu with high-performance pure copper HIFC, tin-coated OFC, and high-purity oxygen-free copper. The dynamic sound that cannot be imagined with a thin exterior is attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Speaker cable 2.0m pair ends untreated. It is a cross insulated structure with an air layer called CIS as a damper, and the sound quality is flat and natural without any habit. I think you can use it regardless of genre. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
*The volume cannot be replaced with a replacement product, and the volume cannot be changed with the remote control. Maintained! A mid-range model in the ES series, a masterpiece amplifier from the heyday of audio. While the sound is crisp and well-contoured, the balance that doesn't feel tight is appealing. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 maintenance completed (speaker relay replacement, 16 other resistance deterioration locations replaced, other mute SW, source direct SW, INPUT selector, direct SW, Cartrich LOAD, RECOUT, SW disassembly contact polishing cleaning grease application, A board B board solder poor contact repair, DC bias DC balance adjustment, DC bias DC balance adjustment, volume VR 9 o'clock position replacement for Gari Then the volume cannot be changed. (The current situation is limited due to the weight of BAL and Tone volumes, grease injection treatment for shafts, etc., and no parts and cannot be replaced)
Accessories: remote control, instruction manual
Main specifications: 105W+105W (8Ω) W470 × H165 × D435 mm 21.2 kg
Comes with a stroboscope! Turntable seat made of butyl rubber and tungsten. Achieves clear, cloudy playback sound. It also has an excellent effect on preventing vinyl records from slipping. You can see a feeling of use, such as the exterior, dullness, white stains, and abrasions (Kobayashi Hitoshi)
Accessories: stroboscope
Power cable 2.0m PSE standard product holds the OFC conductor tightly with a PVC sheath, and 24K gold plating is used for plugs and connectors with polarity display. The sound quality is sharp and punchy. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 Continuity confirmed
Accessories: none
Digital cable, 1.0 m, Toslink (square at both ends) type, 0.7 mm, low loss quartz glass. It is a genuine Accuphase optical digital cable that is not often sold on the market. There are seal marks on the sheath (Kojima Yosuke)
Accessories: none
Digital cable, 1.0 m, Toslink (square at both ends) type, 0.7 mm, low loss quartz glass. It is a genuine Accuphase optical digital cable that is not often sold on the market. There are seal marks on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable 6.0 m pair A classic BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a solid sound (Kojima Yosuke)
Accessories: none
Speaker cable 2.0m pair with untreated+soldered ends, sold out type using the company's highest-grade cable material. Recommended for those who want to improve low frequency tightness. An XLO tube is wrapped around the tip ※Please be careful when pulling as the cable is stiff (Kojima Yosuke)
Accessories: none
Improved model, successor to the 1.8m JPA-10000 power cable. The sheath is significantly thinner than the predecessor, improving maneuverability. In addition to the individuality of the sound of the predecessor, I have the impression that the strength of the low frequencies has increased (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The price has been reduced! 2024/6/10 sales price 49800 yen RCA to XLR cable (No. 2 HOT) 1.0m pair, new-generation lowest price guarantee, stress-free 7N copper conductor & polyolefin sheath model, with fine texture, and a very careful sound. Recommended for those who want to listen closely to classical music. There is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
The price has been reduced! 2024/6/27 sales price 79,800 yen A shell oval needle features the original direct sound of the SPU. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. The needle cover is partially chipped. Serial 412790 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
The price has been reduced. 2024/6/26 sales price 79,800 yen DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Exterior, the saran net is extremely hard to attach and detach, so there are cracks in the dowel hole in one place, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.26 Operation confirmed
Accessories: instruction manual, saran net, jumper, spike, spike holder
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/25 sales price 39,800 yen Hi-Fi Hall first arrival! Beautiful item with original box. An all-weather 2-way compact speaker. It has a polypropylene graphite filled cone woofer and an aluminum tweeter with an acoustic lens wave guide, perfect for outdoor locations with weather protection. Serial IA0111-KM0001510 IA0111-KM0001511 (Asaine Tomoho)
Maintenance information: 2024.6.25 sound output confirmed (good sweep test)
Accessories: original box, English instruction manual, mounting brackets
Main specifications: output sound pressure level 86 dB frequency characteristics 75 Hz to 25 kHz crossover frequency 2.5 kHz size W 182 x 245 x 162 mm weight 5 kg
Everything from the exterior to the internal unit and network was fully maintained in January 2023! Comes with a dedicated trolley and a reflector on the back. Vitavox, which developed mainly commercial equipment for theaters in England, announced in 1947, the company's first high-end corner speaker system for home use. The gentle tone of the horn is full of unrivaled appeal. The elegant design, which can be said to be art suitable for the finest products, is also excellent (Daiki Goto)
Maintenance information: 2023.1.28 Maintained (exterior repair/cleaning, black paint on the back. Woofer maintenance (edge crack repair, magnetic circuit rust removal/gap cleaning/center adjustment.
Driver maintenance (magnetic circuit gap cleaning/center adjustment) network maintenance (terminal block cracks are bonded and reinforced with epoxy. Tuck in some of the terminal screws that are too long. Brush the ATT contacts and clean them. Characteristics were measured, and the results were good, and the original capacitors were continuously used. (Check the sound output)
Accessories: Self-made special trolley, self-made reflector
Main specifications: driver S-2 horn CN481 woofer AK-157 network CN458 W1120 x H1350 x D770 mm (actual measurement)
Tigron's 1.5m Peer Notric XLR terminal combines Tigron's technology with the imagination of Sunshine. High-class specification with Tiglon's highest grade cable treatment “H.S.E. Grande Treatment”. It is also very soft and smooth to the touch, making it easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Tigron's 1.5m Peer Notric XLR terminal combines Tigron's technology with the imagination of Sunshine. High-class specification with Tiglon's highest grade cable treatment “H.S.E. Grande Treatment”. It is also very soft and smooth to the touch, making it easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Special feature = watching hardware and software/CD software in the Hi-Fi era/roundtable discussion; tone arm research/measurement and audition of a 5ch divider/vacuum tube power amplifier/WE-293a PP/WE300b PP/EL34pp/VT52pp/VT104 10E, 215/listening room/published circuit diagram: Futterman NCP-1/OTL-1/S58.11.1 issued. Since the photograph is a sample, the actual item may be broken or there may be markings etc.
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/3 sales price 398,000 yen with AKTIV CROSSOVER! (4 separate stereo power amplifiers are required) Multi-purpose dedicated system speakers. As an isobaric low frequency system, the same unit as the woofer visible on the front is stored inside the enclosure. Using multiple amplifiers, AKTIV CROSSOVER allows optimal music signals to be played for each unit, creating high quality sound typical of LINN in all bands. The exterior is dull and has a feeling of use, and the saran net is loose. Serial 000295 000296 (Hiroki Aso)
Maintenance information: 2024.6.3 sound output confirmed, AKTIV CROSSOVER maintained (power supply unit replacement, main board, electrolytic capacitor replacement, output, audio check, check frequency characteristics, etc.)
Accessories: AKTIV CROSSOVER
Main specifications: 3 way, 4 speakers, isobaric system, crossover frequency 90 Hz, 3 kHz, external dimensions W350 x H1050 x D410 mm, weight 55 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 2,980,000 yen In addition to full maintenance including the exterior in 2020, the ATT has now been cleaned and inspected all parts, and further brushed up. The Georgian 4, which has an attractive elaborate horn configuration and beautiful furniture-like design, has arrived. It has a structure with a built-in crispy horn to create a unique sound with a rich sense of scale. There is a smell in the room (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (ATT cleaning/inspection of various parts) 2020.2.12 maintained ([main body] exterior cleaning/touch repair, resonance/distortion countermeasures, unit detachment [unit] single-sided woofer recorn, both driver disassembly and cleaning, TW one-sided disassembly and cleaning, TW single-side coil manufacturing exchange [network] TW capacitor and resistor replacement. *Some capacitors before replacement are difficult to remove, so they are left inside. Frequency characteristic measurement check (~ 42 kHz). Input/output waveform and balance check, sound output check.)
Accessories: none
Main specifications: 15WK, MT-30 (828HF), T35VHF, X336 (300/3500) approx. W860 x D660 x 1350 mm approx. 90 kg
Speaker cable with 3.5 m pair soldered ends. It is a solid sound that clearly shows the backbone of the LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
Power cable 2.8m Oyaide power cable V-XY/V-XX, made exclusively for the VONDITA-X based on the highest-grade plug M1/F1, are used as plugs and connectors. The cable is based on 102 SSC and uses a silk interposition, a drain line with a double helix structure, and an exterior sheath combining different materials, and is committed to thorough damping (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: original box
Maintained! A shell round needle model. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. The exterior has dullness etc. due to use over time (Asaine Tomo)
Maintenance information: 2024.6.28 Maintained (pedestal installation, damper adjustment)
Accessories: original box needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Maintained! A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.28 Maintained (vibration system replacement shell replacement)
Accessories: original box
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g