A digital processor that inherits DP-720 technology. ES9018 manufactured by ESS Technology is operated in parallel. It is especially recommended for Accuphase CD players and transports. The SN is good, the sound has good visibility, and is excellent compatibility with high resolution and PC audio. The exterior is scuffed and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.11.20 Operation confirmed
Accessories: instruction manual, power cable, HS link cable, setup CD
Main specifications: digital input HS-Link x 1 coaxial x 2 TOS link x 2 USB x 1 XLR x 1 USB 5.6448 MHz (1 bit 2 ch DSD) 384 kHz (32 bit 2 ch PCM) high resolution compatible dimensions W465 x H114 x D385 mm weight 14.4 kg
This is the first time in a while that this set is in stock! This is a 3-piece set with an outer circumference/inner circumference stabilizer, acrylic cover, and gauge. A twin stabilizer that enhances the rigidity of the record board and suppresses vibrations. *Please note that depending on the record player, the stabilizer may interfere with the surrounding power buttons, lights, etc., and you may not be able to use a large platter due to its height. There are scratches and scrapes (Daiki Goto)
Accessories: none
Main specifications: [inner circumference stabilizer] diameter 84 x H29.5 mm 550 g [outer circumference stabilizer] diameter 348 x H10 mm 1350 g
Vacuum record cleaner manufactured by CLEARAUDIO in Germany. The noise reduction effect is remarkable, and it is the definitive record cleaner. There is a small scratch (Daiki Goto)
Accessories: manual, power cable
Main specifications: 100V specification W325 x H250 x D325 mm approx. 8.7 kg
Maintained! A compact power amplifier where you can feel the strength of the USA Marantz era. The energetic sound is sharp and goes great with jazz, soul, rock, etc. There is a feeling of use appropriate for the model year, such as rust, small scratches, etc. (Oikawa Tetsuji)
Maintenance information: 2024.11.20 Maintained (meter lamp out → lamp change replacement, operation check)
2024.8.24 Maintained (meter lamp replacement, etc., internal dismantling check, poor Lch power stage Tr characteristics, bypass C in both CH boards, replacement operation check for C, etc. in relay circuits)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) damping factor 30 (8Ω) power meter (sensitivity can be switched in 3 levels) mounted dimensions W358 x H120 x D273 mm weight 11 kg
Comes with a remote control. Line-only pre-main amplifier. The output stage is a single-ended, ultra-linear connection that makes the most simple use of the EL34. It has a bright sound unique to vacuum tubes, and is a gem that is still popular today. You can enjoy the glossy, rich tone that sets it apart from recent vacuum tube amplifiers. It can also be said that it is an attractive product for interior decoration. The exterior is dull and small scratches can be seen. Serial 430037 (Yonejima Satoshi)
Maintenance information: 2024.11.20 Operation confirmed
Accessories: instruction manual, power cord, remote control
Main specifications: output 12W+12W grade A single W275 x H165 x D375 mm 14.0 kg
Maintained including switch and main volume disassembly and polishing! LUXMAN vintage prime amp from the 60's. Although it is a transistor, it was made in '69, so you can hear the soft, rich sound unique to LUXMAN. The design unique to vintage is a masterpiece that is attractive enough as an interior decoration. The exterior has scratches on the top plate and scratches on the upper front. Serial 10214251 (Fujisawa Yukishi)
Maintenance information: 2024.11.20 Maintained (switch disassembly contact polishing. Main volume disassembly contact polishing. I/O pin jack and other polish. The transistors inside the circuit have been replaced. The condenser has been replaced with a high quality one. Sound output operation check)
Accessories: No accessories
Main specifications: continuous output 17W+17W W373 x H125 x D227 mm 4.9 kg
Maintained! Comes with a cabinet. Sony's highest-grade 5-channel vari-controlled FM stereo tuner at the time. Equipped with a FET, the treble extension is excellent, and it also has the thickness unique to varicones. The retro and simple panel design is also attractive. There are small scratches on the exterior, but it is a good individual for its age. Serial 204747 (Yonejima Satoshi)
Maintenance information: 2024.11.20 Maintained (replacement of power supply control transistors and electrolytic capacitors. Since the RF tracking scale is off, the sensitivity was adjusted and the sensitivity was adjusted. Minimized IF distortion ratio and zero T-meter adjustment. We will adjust the MPX section separation. (Fixed rattling on the panel escutcheon flywheel, replaced the lighting lamp, cleaned the scale plate, and corrected the output level volume.)
Accessories: No accessories
Main specifications: FM stereo tuner, reception frequency 76 MHz to 90 MHz, frequency characteristics, 20 Hz to 15 kHz, antenna terminal, 300 ohm balance, 75 ohm unbalance, W400 x H145 x D310 mm, 9.2 kg
A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
This tall boy speaker is a small size in ATC, which is also famous as a monitor. The overall strength, such as sense of localization and energy, is high, and the mid-high range, which has a particularly good sense of tone, is exquisite. By raising the amplifier by 1 rank, it becomes even more attractive. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.17 Operation confirmed
Accessories: saran net, jumpers, spikes, original box
Key Specifications: 3 Way 3 Speaker Sealed Tweeter: 25mm Diameter Soft Dome Midrange: 75mm Diameter Special Coated Polyester Woven Soft Dome Woofer: 165 mm Diameter Pure Pulp Cone Impedance 8 Ω 85dB W230 × H965 × D315 mm 315 kg
By equipping the DAC with 2 Barbrown PCM1738 channels, it is possible to achieve both low noise and improved reproduction accuracy while improving the clear expressiveness of the sound field. Try it out with a classical symphony. There are conspicuous scratches on the exterior and front window, and a feeling of use such as dullness, stains, and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.11.19 Operation confirmed (due to the specifications of the universal remote control, please press the CD button during initial operation. (Press and hold SW to open the tray)
Accessories: remote control, instruction manual, power cord, original box
Main Specifications: DAC: Barbrown PCM1738×2 Analog Output: Unbalanced 2.0VRMS Digital Output: Coaxial SPDIF: 75Ω Balance AES/EBU: 110Ω Optical TOSLINK Output Impedance: 100Ω
Frequency characteristics: 20 Hz to 20 kHz (+0/-0.2 dB) SNR: 105 dB Distortion rate: 0.01% or less (20 Hz to 20 kHz)
W430×H100×D385mm 8kg
Currently sold products*Inexpensive because the dowels on the saran net are broken in 3 places on one side. It is a speaker with a medium bandwidth balance that allows you to listen perfectly to sound image localization. The sense of spaciousness of the sound is excellent for an individual class, and it can be said that it is the best entry model for both 2ch audio and 3D to 5.1 chAV systems. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.13 Operation confirmed
Accessories: saran net
Main Specifications: 2 Way 3 Speaker Sealed Tall Boy System 8Ω 90db Playback Frequency Band 43Hz to 25kHz W265 x H1175 x D24mm 15.3 kg
※Since it is in poor condition, it is cheap and is sold as is. Heavy bass reproduction from 23 Hz. It is a highly rigid cabinet with excellent sharpness. The compact system makes it possible to play low frequencies with a sense of volume. The exterior and bottom of the enclosure (particle board) on the bottom and back are deformed due to moisture, and a feeling of use such as dullness, scratches, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.11.8 Operation confirmed
Accessories: none
Main specifications: output 150W (5Ω) 20cm cone type (anti-magnetic) playback frequency band 23Hz to 170Hz (-10dB) W235 x H485 x D402 mm 15 kg
Standard model of the company's MM/MC compatible phono equalizer. By adopting a non-feedback amplifier, which is not often found in other companies, it is excellent in terms of sound quality in terms of expressing the dynamism, dynamics, and shadows of music. The exterior has small scratches and a feeling of use such as dullness. Serial E3170009 (Tomonori Asaine)
Accessories: instruction manual, power cable, original box
Main specifications: Zmm/MC compatible phono equalizer, gain mm38dB/MC65dB, 2 input systems (RCA) output 1 system (RCA) with MM/MC changeover switch, W310 x H78 x D335 mm (including terminals), weight 5.0 kg
DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. There are small scratches on the exterior. Serial 9541018 (Yonejima Satoshi)
Maintenance information: 2024.11.19 sweep test good
Accessories: saran net, spikes, jumper cables (general-purpose products)
Main specifications: 3-way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
The price has been drastically reduced! 2024/11/16 sale price 298,000 yen This is a special edition model with further improved quality of the L-509f. The color was changed to blaster white, and the sound quality also changed. The thick high-fidelity tone, which can be said to be the prototype of the current LUXMAN, demonstrates all-round appeal. There are scratches and bumps on the exterior. Serial M50711464A (Fujisawa Yukishi)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: 160W+160W (8Ω) 240W+240W (4Ω) size W467 x H179 x D435 mm weight 28.5 kg
The price has been drastically reduced! 2024/11/15 sales price 248,000 yen 2024/8 maintenance completed! Vacuum tube pre-main amplifier with a built-in authentic PHONO equalizer. Uesugi's beautiful, pleasant sound makes vocals and stringed instruments sound lustrous. It has a triode tube connection PP configuration with driving power, and there are plenty of mid to low ranges. The exterior has small scratches and a feeling of use such as dullness. Serial 021 (Tomonori Asaine)
Maintenance information: 2024.8.5 maintained (balance VR, main VR, phase reversal vacuum tube, each replacement, damaged screw replacement, screw hole correction, vacuum tube pin cleaning, foreign matter removal bias and output sound check)
Accessories: none
Main specifications: 6CA7 specification output 20W+20W PHONO (MM) input W445 × H170 × D432 mm weight 22 kg
Limited edition of 120 units sold to commemorate the 20th anniversary of Triode's establishment. The 2A3 is mounted by push-pull. In addition to the luster of the mid to high range unique to vacuum tubes, you can also clearly feel the strength of the low range. You can enjoy music sitting on your back with an output of 10W+10W or more. The exterior is also in good condition with no noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: power cable, instruction manual
Main specifications: 2A3 AB grade push-pull vacuum tubes, 2A3 x 4, 6SN7 x 4, rated output 10W+10W (8Ω), frequency characteristics, 10 Hz to 60 kHz, dimensions W400 x H205 x D470 mm, weight 25 kg
PEERLESS step-up transformer for low impedance. Both the thickness of the low frequencies and the subtlety of the high frequencies are perfect, and overall it is a boost transformer with a thick, glossy sound. There are noticeable scratches on the front panel, and there is dullness in places (Kojima Yosuke)
Maintenance information: 2024.10.19 Operation confirmed
Accessories: none
Main specifications: impedance 1 to 6 ohms, 1 input/output system each, W135 x H85 x D157 mm 1.6 kg
The price has been drastically reduced. 2024/11/17 sales price 238,000 yen 2021 maintenance completed! With the density and suppleness of the sound typical of THORENS, you can enjoy an analog feel not found in recent players. Equipped with the SME 3009R, it further fully demonstrates the individuality of the cartridge, and is compatible with a wide range of cartridges, from lightweight types to SPU heavy weight cartridges. There is a feeling of use such as slight dullness, small scratches, and abrasions and cracks on the dust cover. (TAKASAKI Atsushi)
Maintenance information: 2021.11.19 Maintained (replacement due to belt extension, servo circuit capacitor replacement, lead screw due to heavy duty cleaning, replacement due to poor rubber in the subweight, arm operation/voice check, cam crack repair and fixing due to arm end lift-up detection cam misalignment, rotation speed adjustment)
Accessories: copy of the manual, AC adapter
Main specifications: [TD-320MK3] belt drive type floating cabinet size W440 x H170 x D350 mm [3009R] static balance type short type 9 inch needle pressure 0 to 5 g compatible cartridge weight 9.5 to 22 g
The disposal price has been reduced. Member prices are not applicable. 2024/11/15 sales price 648,000 yen pure A grade stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. Not only is the sense of power and powerful bass, but the supple texture and glossy mid to high range are still attractive enough. There is a thread on the steering wheel and a small scratch on the front corner (Sasaki Shota)
Maintenance information: 2024.11.15 Operation confirmed
Accessories: manual, power cable, original box
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
The price has been reduced. 2024/11/18 sales price 498,000 yen Luxman high-grade SACD player. In addition to the powerful sound with a thick back, this is a versatile machine typical of a modern aircraft, with a high level of freshness and a good signal-to-noise ratio. Not to mention the high level of spatial expression unique to SACD, unlike Luckstone in the past, it is popular with jazz and rock fans for its high instantaneous sound quality. There is a dull feeling of use, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.11.18 Operation confirmed
Accessories: remote control, manual, power cable
Main specifications: analog output RCA x 1 XLR x 1 digital output (44.1 kHz CD/CD layer only) coaxial x 1 optical (TOS-LINK) x 1 digital input (32/44.1/48/88.2/96 kHz compatible) coaxial x 1 optical (TOS-LINK) x 2 W440 x H153 x D400 mm 23 kg
The flagship model at the time was beautifully revived by replacing 11 transistors and 13 capacitors, and polishing the contacts at each part! The sound quality is thick with mid-range tension, making it an easy to hear amplifier. There is a feeling of use on the exterior, such as dullness and small scratches, etc., serial TG1000555 (Asaine Tomoho)
Maintenance information: 2024.11.12 maintained (filter circuit transistor, capacitor deterioration replacement, power amplifier circuit, transistor, capacitor deterioration replacement, other INPUT LEVEL, SPEAKER selector rotation SW decomposition, polishing cleaning, INPUT switch, low filter lever SW disassembly, polishing cleaning, and other sound output confirmation tests. The INPUT LEVEL is best used at 1V or 2V when connected to a preamp with 8 transistors on the protection board and 3 replacement capacitors (supplementary). (Compared to SP B terminals A and C, they are slightly concave, but this is because the mounting plate deteriorates over time and is deformed, so I will leave it as it is without any problems with use)
Accessories: none
Main specifications: rated output 85W+85W (8Ω) output bandwidth 5Hz-50kHz W422xH172xD288mm 15.1kg
*Remote control is missing. Maintained! It is a CD player with a robust G chassis. You can listen to well-balanced sounds with clear outlines. The heavy, powerful sound is perfect for jazz and rock. The exterior, small scratches, dullness, and feeling of use can be seen (Kanai Hidetsugu)
Maintenance information: 2024.11.19 Maintained (reattached after cleaning due to deterioration of the adhesive bond on the front acrylic cover. To cure grease on the loading mechanism part, disassemble the mechanism, wipe clean, and then apply float. (Adjustment of the pickup's mechanical system and electrical system.)
Accessories: copy of instruction manual
Main specifications: 4x oversampling left and right independent dual D/A converter W430 x H125 x D395 mm 13.5 kg
Arrived for the first time in 6 years! Single amplifier using a triode EL519. The clear high range, which has a unique sense of transparency, and the middle range, which is rich in nuances without turbidity, are attractive. It is an amplifier with an unrivaled personality that has a sense of power and can also express the afterglow of a spherical sound. There are small scratches and dullness on the volume and input selector knobs (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: power cable
Main specifications: 14.5W+14.5W (8Ω) vacuum tube EL519×2/PCC88×2/ECC85×2 W400×H150×D400mm 20kg
Ultra wideband super tweeter. You can enjoy music full of sound field by playing back the sound with a natural sound that is unparalleled in the world and combines sharpness and strength with the sound of each instrument. This item was created by professional technology that is familiar with the human hearing mechanism that self-corrects. The exterior is also in good condition with no noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.11.19 Operation confirmed
Accessories: instruction manual
Main specifications: impedance 8 ohms, efficiency: 86 dB, allowable input: 20 W, playback frequency band: 16 kHz to 100 kHz, directionality, omnidirectional (low cut cross/L16 kHz/M18 kHz/H20 kHz), W20 x H20.5 x D20 mm, 3.5 kg/unit
I replaced the deteriorated parts, including 16 transistors and 8 capacitors, and came back to life! The 707 series plays a central role in Sansui. Both sides of the PHONO2 system are MM/MC compatible, and since they are compatible with all MC cartridges, 2 levels of impedance switching between low and high are possible. This is an amplifier I definitely want you to listen to records to your heart's content. There is dullness, scuff marks, and scratches on the corner. Serial 823040462 (Fujisawa Yukishi)
Maintenance information: 2024.11.19 Maintained (AB output relay replacement. Headphone relay replacement. Master volume exchange. Balance, treble, and bass volume exchanges. Switch disassembly and polishing (input selector, recout, tone, 16Hz, 20KHZ, muting, tape, MC transformer, MC cartridge, frequency switching) power supply unit floating resistor replacement. Replace the equalizer, 16 power amplifier transistors, and 8 capacitors. Solder repair. (Internal inspection and cleaning, pin jack polishing, operation confirmation)
Accessories: No accessories
Main specifications: 110W+110W size W460 x H160 x D404 mm weight 15 kg
The price has been reduced. 2024/10/17 sales price 99,800 yen Maintained! An MC-specific phono equalizer released to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is a scratch on the top plate (Daiki Goto)
Maintenance information: 2024.10.17 Maintained (all 17 internal liquid leak capacitors have been replaced, pattern corrosion parts cleaned with leaked electrolyte, change the MUT drive circuit resistance constant, and MUT time (2sec) is controlled by adding a capacitor for time constants, and the operation is similar to the original. Lamp lighting operation (the lamp changes from green to red when overdrive is detected, and a return to green is confirmed during recovery)
Accessories: copy of manual, power cable
Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
The disposal price has been reduced. Member price 25,000 yen 2024/2/3 sales price 30,000 yen ※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of wear such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
This is a side wood panel for STUDER's D730 CD player. If you've been looking for one, take this opportunity!
You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Maintained by the manufacturer! Second generation model in the popular S10 series. It uses traditional ALPHA processing and the company's own Lambda S.L.C. A CD-only model that is still popular today for its vivid mid-high range and rich low range. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 8107400787 (Takahashi Nobuyuki)
Maintenance information: 2024.11.7 Maintained (tray cleaning, CD internal laser pickup, loading belt, tray opening/closing SW exchange. (Other inspection of each part, operation sound test)
Accessories: Power cable, remote control, copy of instruction manual
Main specifications: ALPHA processor, 20-bit current addition type DAC with digital input/output, W434 x H135 x D350 mm, 14 kg
Maintained! There is a difference in the position of the ATT dial between the two sides, but the current situation is. It is a network that the company has installed for 604E units such as 612A and Crescendo. It can be said that it is a product with extremely high cost performance compared to duplex type units of this era. You can see a feeling of use such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.13 maintenance completed (ATT VR replacement crossover operation check)
Accessories: plate
Key Specifications: Crossover 1500 Hz impedance 8 to 16 ohms
*Currently sold. A convenient superwoofer that is easy to use. It comes with volume and is easy to adjust. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.11.13 Operation confirmed
Accessories: none
Main specifications: amplifier output 200W, playback frequency band 50-100Hz, W280 x H325 x D360 mm, weight approx. 10 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/11/3 sales price 248,000 yen with a dedicated stand! Popular Harves speaker HL5. It is a particularly popular model among the Harves generations that still have many fans. The smooth and lustrous tone of the stringed instrument is unique. I'm fascinated by how aggressively the box sounds like a musical instrument. Also, when you play back the live sound source, it makes you hear such a vivid sound that you misunderstand that you are right there. There are scratches, line damage, and repair marks on the exterior. Saran net is not included. Serial 7014A, 7014B (Fujisawa Yukishi)
Maintenance information: 2024.11.3 operation confirmed
Accessories: dedicated stand
Main specifications: 2 way 2 speakers bass reflex type output sound pressure level 86dB impedance 8Ω maximum input 100W playback frequency band 50 Hz to 20,000 Hz crossover frequency 2,000 Hz W325 x H640 x D310 mm 17 kg (speaker) W370 ✕ H270 ✕ D370 mm 5.86 kg (stand)
Maintained by the manufacturer. Rather than a hard sound, the sound quality is easy to hear, with a good balance between relaxed low frequencies and flat, fleshy mid-high frequencies. The exterior has noticeable scratches on the front panel, and there is dullness over time throughout. Serial 2041501171 (Tomonori Asaine)
Maintenance information: 2024.11.18 Maintained (loading belt tray opening/closing SW/laser pickup replacement operation sound test)
Accessories: None ※ remote control missing
Main specifications: allowable input 75W, efficiency 91 dB, crossover frequency 9.5 kHz, 420 W x 135H x 171D (mm), 4.4 kg
*Currently sold. It is a center speaker with a double woofer configuration that provides excellent low frequency playback. This MDF cabinet has a wood-like finish that blends naturally into your interior, and is designed to easily match your home system. There is a feeling of use on the exterior, such as scratches, dullness, peeling, etc. Serial H40490193 (Tomonori Asaine)
Maintenance information: 2024.11.17 Operation confirmed
Accessories: saran net
Main specifications: allowable input 75W, efficiency 91 dB, crossover frequency 9.5 kHz, 420 W x 135H x 171D (mm) 4.4 kg
The 684S2, which is the 5th generation of the 600 series, is now in stock. The sense of realism and resolution are high, and it makes you feel the atmosphere of the PM1 and CM10, which are higher-level models. The design also stands out cleanly and is a size that is easy to use. The exterior has a bruise on the corner and a small scratch on the pedestal (Mizusaki Ryo)
Maintenance information: 2024.11.18 sound output confirmed
Accessories: round foot
Main specifications: 2-way floor type playback frequency 45 Hz to 50 kHz efficiency 87 dB impedance 8 ohm crossover 4 kHz W235 x H955 x D238 mm weight 14.2 kg
*Currently sold. It's cheap because it has a little bit of thickness. Attenuators for Pioneer speaker systems. Variable attenuation in 2 dB steps is possible between 0 and -22 dB without changing the impedance seen from the amplifier side. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.11.15 operation confirmation (there is a slight gap)
Accessories: original box
Main specifications: impedance 8 ohms L type constant resistance method 0 to -22 dB (2 dB step switching) W90 x H90 x D146 mm 0.5 kg
*Currently sold. A multi-audio player system that is compatible with high resolution and allows you to enjoy a variety of sound sources with realistic sound. It is possible to play back by connecting various devices such as an Android smartphone, iPhone, iPad, iPod, PC, USB memory, etc. You can enjoy high sound quality on CDs, FM/AM, Bluetooth, and Wi-Fi. Other than the exterior and dents on the corner of the remote control, there are no conspicuous scratches, etc., and the dullness is good (Kobayashi Hitoshi)
Maintenance information: 2024.11.16 Operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: Amplifier section, practical maximum output 50W+50W, CD part, CD → Walkman recording speed capture format, approx. 2.5 times speed/MP3 CD-R/RW playback CD-DA (music CD) MP3 tuner section band FM/AM, broadcast station preset FM20 stations, AM10 station network connection WiFi IEEE 802.11b/g, DLNA DLNA (DMR, Play To) AirPlay wireless connection Bluetooth (R) (A2DP/AVRCP) one-touch listening (NFC) aptX, AAC direct connection Walkman USB connection, USB terminal (music playback) iPod/iPhone/iPad/USB memory (WAV MP3 WMA AAC ALAC FLAC AIFF DSDIFF) 50W+50W W251 x H115 x D290 mm 5.6 kg
The disposal price has been reduced. Member prices are not applicable. 2024/10/28 sales price 258,000 yen 2020 maintenance completed. There are some scratches, so it's cheap. An attractive 2-way floor type speaker with clear sound image localization and a wide sound field. It is a model with a design that exudes a high-quality atmosphere, so it won't hurt even when bought, and its ability as a speaker also shines. The exterior has dullness, dirt, and small scratches (Oikawa Tetsuji)
Maintenance information: 2020.10.31 maintenance completed (exterior repair/cleaning, saran net replacement, woofer edge replacement, driver magnetic circuit slit cleaning/center adjustment, sound-absorbing material replacement, terminal contact cleaning)
Accessories: jumper plate
Main specifications: 2 way 2 speakers, frequency band, 30 Hz to 20 kHz, crossover, 750 Hz, sound pressure level, 94 dB, impedance 6 ohms, maximum input, 200 W, W561 x H1,115 x D406 mm, 56.8 kg/book
The price has been reduced! 2024/11/16 sales price 348,000 yen This tall boy speaker is a small size among ATC, which is famous as a monitor. The overall strength, such as sense of localization and energy, is high, and the mid-high range, which has a particularly good sense of tone, is exquisite. By raising the amplifier by 1 rank, it becomes even more attractive. The exterior has a feeling of use such as dullness. Serial 3369 3370 (Tomonori Asaine)
Maintenance information: 2024.11.16 sound output confirmed
Accessories: saran net jumper plate spike
Key Specifications: 3 Way 3 Speaker Sealed Tweeter: 25mm Diameter Soft Dome Midrange: 75mm Diameter Special Coated Polyester Woven Soft Dome Woofer: 165 mm Diameter Pure Pulp Cone Woofer 8Ω 85dB W230 × H965 × D315 mm 315 kg
Arm base compatible with SME 3009, 3010R, etc. compatible with the micro 1500/3000/5000/8000 series. The exterior is in addition to small scratches and dullness, and there are aging deposits on the bottom (Yamato Yuki)
Accessories: none
Main Specifications: Brass Arm Base Compatible Tone Arms: SME 3009S2/3009S3 1.12 kg
Unit maintenance completed! It is a system in which the AXIOM80, a reprint of HAVANT HANTS, is mounted in a Hino enclosure. It is still highly popular, and its loud sound is the ultimate in transparency. The high sound pressure that quickly rises from the mid to high range is evident from the source to the completion of the player. There are scratches and bumps on the exterior (Yamato Yuki)
Maintenance information: 2024.9.5 maintained (cone, damper, edge blade, block disassembly. The deformation of the blade and cone was corrected, and the bobbin was rounded out. Magnetic circuit slit cleaning and rust prevention. Complete assembly of each part, adjustment, and sound output maintenance. (There is no problem with one pair)
Accessories: saran net
Main specifications: 25 cm aperture input 12 W impedance 15 ohms minimum resonance frequency 20 Hz playback frequency band 20 to 20,000 Hz W505 x H1,023 x D376 mm weight approx. 30 kg
The disposal price has been reduced. Member prices are not applicable. 20024/11/13 sales price 138,000 yen ※It is cheap because the saran net is missing and there are scratches on the front and sides. An upgraded FS247 model, Sapphire Edition. The luster changes depending on the viewing angle. A large number of high quality parts have been adopted to improve sound quality. Both resolution and sense of volume are perfect, and it has expressive power that is not similar to a slender body (Oikawa Tetsuji)
Maintenance information: 2024.11.13 Operation confirmed
Accessories: jumper plate, spike, spike holder
Main specifications: 2.5-way bass reflex crossover frequency 450/2,500 Hz frequency characteristics 30 to 50,000 Hz efficiency 89 dB impedance 4 ohms W220 x H1020 x D320 mm 16.8 kg
The disposal price has been reduced! Member prices are not applicable. 2024/11/9 sales price 598,000 yen Maintained in July 2019! A tubular mono power amplifier that makes you hear a profound, Macintosh sound. The highly transparent sound was restored through an overhaul. You can enjoy the relaxed and calm sound unique to vintage McKinn. ※The left and right specifications are different. Some lettering is peeled off on the exterior, and there are corrosion marks, scratches, rust, etc. on the chassis. Serial 5698/553 (Yonejima Satoshi)
Maintenance information: 2019.7.18 Maintained (volume disassembly cleaning repair. Vacuum tube 6550 deteriorated and replaced with 2 pairs x 2. Replace 2 vacuum tubes with 5R4 → 5U4 original ones x 2. Vacuum tube socket and RCA jack re-caulking repair. 5689 side block capacitor 35/80/15 μF replacement)
Accessories: No accessories
Main specifications: 60W load 4Ω/8Ω/16Ω frequency characteristics 20 to 30,000 Hz W356 × H203 × D254 mm 20.7 kg
The price has been drastically reduced! 2024/11/14 sales price 248,000 yen This is an attractive 2-way floor type speaker with clear sound image localization and a wide sound field. The design exudes a high-quality atmosphere, but its high ability as a speaker comes with origami. The low range with a rich sense of volume and the ease of slack unique to horns make you feel the dynamism unique to JBL. The exterior is torn on the saran net, and there is a scratch on the corner. Also, the legs have been changed. Serial J110-012838/J109-012709 (Yonejima Satoshi)
Maintenance information: 2024.11.14 good sweep test (woofer edge replaced)
Accessories: saran net
Main specifications: 2 way 2 speakers, frequency band, 30 Hz to 20 kHz, crossover, 750 Hz, sound pressure level, 94 dB, impedance 6 ohms, maximum input, 200 W, W561 x H1,115 x D406 mm, 56.8 kg/book
The price has been reduced! 2024/10/27 sales price 15,000 yen This is a 5-layer audio board. It combines high rigidity, high specific gravity, and high damping properties, and strongly prevents floor noise. It is ideal for installing large speakers, etc., and has a sense of volume and adjusts mids and bass in a well-balanced manner. There are scratches and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: W750×H55×D600mm 18.5kg
The price has been reduced! 2024/11/7 sales price 25,000 yen floor acoustic panel. Reduces sound reflection from flooring, excessive sound absorption from carpets, and the effects of flutter echoes caused by surfaces parallel to the ceiling. It has a flat design with a thickness of 26 mm, so it can be placed in a living space without any sense of incongruity, and it has a reliable effect. When used alone, the primary reflective surface in the center between the left and right speakers is effective. There are small scratches and scuffs on the exterior. The adhesion on the back side has weakened slightly (Tamura Eiji)
Accessories: none
Main specifications: high density MDF, special compression felt W600 × H26 × D600 mm 3.9 kg
Maintained! Sansui 07 series 10th anniversary model. It is a model that has achieved a wide range with CD playback in mind. It is an amplifier with sound quality that is compatible with a wide range of sources of all genres, with a strong low frequency typical of Sansui. There are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.11.17 maintained (output relay replacement, selector lamp replacement, power amplifier section adjustment volume replacement, protector part transistor replacement, slide switch disassembly polishing grease application (phono selector, reck-out), push SW decomposition polishing grease application (input selector, tone, subsonic, ride ness, muting, frequency switching), master volume dismantling, cleaning adjustment, etc. Volume cleaning, interior and exterior inspection cleaning, pin jack polishing, adjustment*Relay operation takes 15 to 20 seconds)
Accessories: instruction manual
Main specifications: 130W+130W (8Ω) size W466 x H161 x D431 mm weight 21.5 kg
Maintained by the manufacturer! A VRDS collaboration model incorporating DAC7, a Philips DAC. It is a player with a high degree of perfection that successfully combines the certainty of a TEAC skeleton with a PHILIPS DAC. You can see the high degree of perfection, where you can feel that it is tight and supple. There is dullness, small scratches, and sticker marks on the front panel*The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.11.17 TEAC maintained (tray drive not working. The driving parts have been replaced. (Operation tests of each part were performed)
Accessories: copy of instruction manual
Main specifications: VRDS Mecha Philips DAC7 analog output 1 system digital output 2 systems W442 × H149 × D331 mm 10 kg
Internal parts have been thoroughly reviewed and replaced and maintained! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. The exterior has minor scratches and dullness from age to age. Serial 200175 (Yonejima Satoshi)
Maintenance information: 2024.11.17 Maintained (The ground pattern of the switching SW solenoid had resistance, so the ground was reinforced and corrected. The input/output waveform was checked, left and right balance was checked, and a comprehensive operation test was performed by connecting the power amplifier to confirm normal operation. ※Unsurprisingly, we have confirmed that crosstalk is terrible. Treatment → The input signal received Hi and countermeasures have been taken. (① The signal flowing to GND has been reduced. ② Anti-static resistors were inserted) 2022.9.17 Maintained (capacitors, semi-fixed resistors, relays, LEDs, lamps, ICs, and spark killers replaced. All SW, VR disassembly and cleaning. Resolder the deteriorated part of the solder surface of the board. (Check the input/output waveform, check the left and right balance, and perform a comprehensive operation test by connecting the power amplifier to confirm normal operation)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg