Phono cable 1.5m 5PIN → RCA plug 6N copper+high purity oxygen-free copper OFC hybrid conductor This cable is recommended for those looking for higher resolution and amount of information with a low impedance cartridge such as an orthophone SPU (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: original box
The power cable uses a 1.8 m ultra-high purity 6nCu (copper) /high-purity 5nCu/pure silver-coated OFC, and high-purity oxygen-free copper hybrid conductor. The texture of the instrument has improved, and you can feel the expansion of the space and the sense of range (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Power cable 0.9 m (unprocessed end) PSE standard is out of print by ONTOMO MOOK's “Stereo Edition” by ONTOMO MOOK, which is out of print, anyone can do it! It is only the wire from the appendix that came with the “Make Your Own Audio Accessory” magazine. You can enjoy clear sound with excellent cost performance. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
This model uses 4 types of wire, mainly untreated high-purity 6N copper at the 2.5 m end of the speaker cable. Of course, with the starcard system, where 2 of the 4 cores are twisted and connected to each other, it is also possible to use each of the 4 cores as bi-wiring by dividing them into high and low frequencies (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Power cable 0.9 m (unprocessed end) PSE standard is out of print by ONTOMO MOOK's “Stereo Edition” by ONTOMO MOOK, which is out of print, anyone can do it! It is only the wire from the appendix that came with the “Make Your Own Audio Accessory” magazine. You can enjoy clear sound with excellent cost performance. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
Phono cable 1.2m 5PIN-XLR terminal specification DIN plug is a straight 8NCu, 4-type hybrid twin core phono cable using rare 8N copper. The amount of information is rich, and the power and sense of scale expression based on the bass range are outstanding (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
5.0 m pair end of speaker cable
This model uses 4 types of wire, mainly high-purity 6N copper. Of course, with the star card system, where 2 of the 4 cores are twisted and connected to each other, it is also possible to use each of the 4 cores as bi-wiring by dividing them into high range/low frequency (Tamai Jun)
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end of the 1.35 m end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor by hybridizing 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
RCA-XLR cable 1.0 m pair No. 2 hot specification Oyaide plug 99.9997% pure silver conductors have improved signal conductivity and are characterized by flat sound quality compared to other copper cables. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: none
Pair tube, 5 pole tube, smoke mesh plate, made in England, measured value 34/34 (rejected value 25) with white box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, 5 pole tube, smoke mesh plate, made in England, measured value 36/36 (rejected value 25) with white box, so it's inexpensive because it makes a rattling noise in 1 tube ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
Maintained. A horn-shaped tweeter developed for the D Series high range using plastic edges. 8Ω specification, compatible horn is CO-800. In addition to being sharp, it is characterized by a precise and delicate sound. Overall, there are dullness, small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.23 Maintained (distortion, vibration repair: magnetic circuit slit corrosion prevention, various parts stop noise, complete maintenance)
Accessories: none
Main specifications: Mid-high range driver, hard duralumin dome, plastic edge, frequency characteristics, 800 to 20,000 Hz, 102 dB, diameter 108 mm x D110 mm, 3.7 kg/bottle