RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
RCA-XLR cable, 1.5m pair, 3rd hot specification, XLR male terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
SENNHEISER wireless earphones. These earphones are suitable not only for listening to music, but also for phone calls, and a battery of up to 28 hours is convenient to carry. A wide range of presets and sound checks can be performed on a smartphone from the dedicated application. There are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: original box, charging case, manual
Key Specifications: True Wireless Stereo Earphones, Canal Type, 5Hz-21kHz
Easy to use 2P type 6-port tap. Suitable for PSE standard audio systems up to mid-level. The exterior is dull and has small scratches. Serial 814001 (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Main specifications: Power cable section 1.8 m
Based on the AT33PTG, this MC cartridge aims to reduce weight and pursue sound quality. Hard resin based on aluminum alloy suppresses resonance and reproduces clear sound. There are no bends. (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.4 mV suitable needle pressure 1.8 to 2.2 g (2.0 g standard) frequency band 15 to 50 kHz 10 Ω dead weight 6.9 g
Maintained! ※Balance volume is a replacement product. Although it is a line-only preamp, it also has a total of 8 input systems, so it is convenient for using multiple devices such as CD players. Also, the CD input is equipped with a dedicated buffer amplifier and volume, so you can feel the attention to detail in this model. The exterior is dirty all over, and there is a feeling of use. Serial L6Y107 (Murakoshi Yoichi)
Maintenance information: 2024.6.25 maintenance (CD VOLUME disassembly and cleaning, balance volume replacement (no replacement center click), loudness SW disassembly, cleaning, solder correction, mold removal, audio check for each input/output)
Accessories: instruction manual
Main specifications: line preamplifier, CD dedicated buffer amplifier, CD dedicated input balanced/unbalanced 1 system each, line input 5 systems, 1 output balance system, 2 unbalanced systems, W475 x H135 x D373 mm, 11 kg
*iPower ELITE, optical fiber cable (15.0m) included This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE optical fiber cable (15.0 m) power cord (general purpose)
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
※Comes with iPower ELITE This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE power cord
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
Acoliba power strip. Uses PSE standard unplated audio grade outlets and audio grade rhodium plated inlets. Sound turbidity is eliminated, and good granularity and a sense of strength can be obtained (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: aluminum alloy housing, 4 openings, W129 x D150 x H35 mm
A unique set of 4 insulators that can adjust the number of springs according to the weight of the main body being used. Each insulator is arbitrarily adjusted using 5 leaf springs to ensure a maximum load capacity of 12.5 kg per insulator (maximum 50 kg when using 4). It is a special insulator that pursues vibration damping properties. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: original box
Main specifications: spring type insulator, machined brass body, bronze leaf spring (press stamped), diameter approx. 40 mm, height 30 mm (36 mm with 5 springs included), approx. 200 g/piece, maximum load capacity 50 kg (when 4 insulators are used, 5 springs are loaded)
2-way bookshelf with monitor audio Pursue sound quality with the C-CAM unit introduced in the Bronze Series. The high cost performance and sound typical of the company are attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.26 sound output confirmed
Accessories: instruction manual, saran net, bass reflex sponge, jumper, rubber feet, hex wrench
Key Specifications: 2 Way 8Ω 85dB Crossover 2,500Hz W166 × H281 × D268 mm 5.0 kg
A USB compatible CD player that looks like a recent model. Audio files stored on iPods, USB memory devices, etc. can be played from the USB port on the front panel. Furthermore, it is an easy-to-use player that supports playback of files in WMA, MP3, and AAC formats recorded on CD-Rs, etc. There is a feeling of use such as abrasions and dullness. Serial MZ001120002919 (Asaine Tomoho)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control instruction manual power cord
Main specifications: 1 analog output system, 2 digital outputs, 1 USB input terminal W440 × H106 × D339 mm 6.6 kg
*Currently sold. This model is equipped with Marantz's advanced DAC. The high cost performance is attractive. Clear sound and detailed reproducibility are key points. It also makes modern sauces sound great. This player is recommended for those who want to get started with audio or those looking for a secondary unit. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: copy of the instruction manual, power cable, remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz dynamic range 100 dB power consumption 14 W size W440 x H104 x D339 mm weight 5.1 kg
Maintained! A control amplifier with improved multifunctionality and operability, inheriting the 8-band equalizer function similar to the C50. Digital transmission of SACD (DSD) signals is realized by providing a DIN digital input dedicated to Macintosh as the digital input. Equipped with 2 phono inputs (MM/MC), you can enjoy all music sources from analog records to high-resolution digital sound sources with Macintosh sound. There are no noticeable scratches on the exterior. Serial AEG 1511 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 maintained (backlight LED and resistor replacement, solder correction, audio/remote control reception check, interior and exterior cleaning)
Accessories: remote control, power cord
Main specifications: 4 analog unbalanced inputs, 3 analog balanced inputs, 1 phono input MM/MC, 3 digital input/optical digital systems, 2 coaxial digital systems, 1 USB system (up to 32 bit/384 kHz, DSD 11.2 MHz), 3 analog unbalanced output systems, 3 analog balanced output systems, 3 analog balanced output systems, W445 x H194 x D419 mm 12.5 kg
An Audionix shell that acted as an agent for Autophone in the 1970s. It feels like the MG-10 is slimmer and lighter, and the letters and curves of the brand name are stylish. *Lead wire missing (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: No accessories
Main specifications: Glass fiber reinforced resin mold, dead weight 8g
PEERLESS boost transformer SLC-1 for low impedance. Both the thickness of the low frequencies and the subtlety of the high frequencies are perfect, and overall it is a boost transformer with a thick, glossy sound. There are scuffs on the exterior. Serial 601029 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: No accessories
Main specifications: impedance 1 to 6 ohms, 1 input/output system each, W135 x H85 x D157 mm 1.6 kg
3rd generation voicing equalizer. Sound field correction/sound field creation is possible freely in the listening room by simply operating the touch panel screen with a single pen. How about a companion to your pursuit of a music space of your choice? The microphone holder has been changed to an Audio-Technica AT8407 (Shota Sasaki)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control, manual, power cable, original box, connection cable, microphone, stylus, microphone holder (AT8407)
Main specifications: 35 band real-time playback frequency characteristics 0.5 to 50,000 Hz (sampling frequency 2.8224 MHz or 192 kHz) 4.0 to 20,000 Hz digital input/output: HS-Link, coaxial digital, 1 optical digital system each dimensions W465 x H151 x D396 mm weight 13.8 kg
※It has a cigarette smell, so it's cheap. A virtual earth for acoustic revival. By connecting this unit to an audio device, the device's potential and electric field are dropped into the main unit. Even those in an environment where an ideal ground ground has already been drawn can be expected to improve sound quality by using RGC-24 (Daiki Goto)
Accessories: instruction manual, original box
Main specifications: cable length 60 cm
Spikes are missing. Popular 4-tier audio rack It has a sturdy construction with a metal frame. A space-saving design with the outer dimensions cut down to the last minute and the internal dimensions extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 4 tier rack cast iron frame W540×D484×H935mm 41kg
Spikes are missing. Popular 5-tier audio rack It has a sturdy construction with a metal frame. The size has been cut down to the last minute to the outer dimensions, and the internal dimensions have been expanded to the last minute in a space-saving design. It brings out the performance of the device with tight and accurate sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 5-tier rack cast iron frame height adjustable (pitch 60 mm) W540 x H1175 x D483 mm approx. 48 kg
An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. A feeling of use can be seen on the exterior, peeling of the veneer, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
Vacuum tube graphic equalizer in the ONTOMO MOOK appendix. 5 bands (55, 220, 880, 3.5 k, 14 kHz) can be adjusted by ±8 dB. It comes with an ON/OFF switch for the GEQ function, so you can play easily. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main Specifications: Input Impedance: 500 kΩ Output Impedance: 330 Ω Frequency Characteristics: 20 to 100 kHz S/N Ratio: 100 dB Crosstalk: 80 dB or less W183 x H120 x D88 mm 0.9 kg
Lead wire missing. OYAIDE carbon shell with a modern, spartan design that won the AEX Audio Famous Machine Award. It is a product that is particular about the direction of carbon fiber (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: none
Main specifications: 4.0mm thick CFRP (17-layer preg material) self-weight 10.7 g
Philips open headphones. The extended high frequency range of high-resolution audio is smoothly reproduced with a sense of transparency (Kanai Hidetsugu)
Maintenance information: 2024.6.24 sound output confirmed
Accessories: original box, cable, instruction manual
Main specifications: frequency band 5 to 40,000 Hz sound pressure sensitivity 100 dB input impedance 30 ohms maximum input 500 mW 50 mm neodymium driver
8 mm thick and thin audio board pair Since all racks and boards made of hard materials have unique resonance frequencies, they can be reborn with high resolution sound without colorization by placing them between the audio device and stand. There is a feeling of wear on the exterior (Tamai Jun)
Accessories: none
Main specifications: size W460mm×D300mm×H8mm
The disposal price has been reduced. Member prices are not applicable. 2024/6/23 sales price 598,000 yen ※This is an upgraded product from DS/K1. A model equipped with KATALIST that has adopted a new clock architecture. Similar to the higher-level model KLIMAX DS/3, DSD can now also be played natively, and the range of playback has greatly expanded. It is a degree of perfection that is close to the height of KLIMAX DS, such as improvements in power supply to the DAC and processor sections by examining the circuit layout. There are dirt marks on the exterior. Genuine Rin Japan. Serial 127 4665 (Tamura Eiji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: remote control, power cable
Main specifications: Playback formats: DSF, DFF, FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS (same as DS and other models) Compatible resolution: 7.35-192 kHz, 16-24 bit (similar to DS and other models) DSD64 (2.8224 MHz) /DSD128 (5.6448 MHz) compatible analog audio output: XLR balanced, RCA unbalanced (fixed/variable output) Digital audio output: 75Ω, BNC, 1 line, EXAKT LINK2 system, W380 x D380 x H91 mm, 5.6 kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/23 sales price 998,000 yen ※This is an upgraded product from DS. A DS/3 model equipped with KATALYST and finally compatible with DSD. Lin's network player reference model. This time, a significant upgrade has been achieved by reviewing not only the chip but also the audio circuit. There are no noticeable scratches on the exterior. Genuine Rin Japan Serial 1229369 (Tamura Eiji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: remote control, power cable
Main specifications: maximum compatible sampling frequency 382 kHz/24 bit DSD11.Line output: XLR balance x 1, RCA unbalance x 1 W350 ✕ H60 ✕ D344 mm weight 10.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/23 sales price 448,000 yen ※There is slight unevenness in the display, so it's cheap. AKURATE DS/K2 (AKURATE DS/K model change) adopted a new clock architecture. Equipped with a digital output terminal (~192 kHz), DAC by examining the circuit layout, and improvements in power supply to the processor section, etc., it is a degree of perfection that is close to the height of the KLIMAX DS. There are scuffs and dirt marks on the exterior. Genuine Rin Japan Serial 1389612 (Tamura Eiji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: remote control, power cable
Main specifications: support file/FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS compatible resolution/7.35-192kHz, 16-24bit Ethernet interface/100BASE-T RJ45, UPnP analog audio output XLR balance, RCA unbalance (fixed/variable output) digital audio output/75Ω BNC 1 system EXAKT LINK/2 system W380×D380×H91 mm 5.6 kg
※Operation has been confirmed, but since manufacturer support has ended, it will be handed over as is. The BDP-105DJP is a high image quality model equipped with cutting-edge image signal processing technology on the BDP-105JP. Equipped with 2 ESS Technology's flagship DAC chips ES9018, it is a media center that provides the latest media playback functions for high quality audio/AV systems. There are no major scratches on the exterior (Murakoshi Yoichi)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: remote control, power cord
Main specifications: frequency characteristics 20-20kHz±0.2dB/96kHz-1.5dB SNR 130dB (A weighting auto mute) HDMI output video format 480i/480p/576i/576p/720p/1080p/1080p/1080p2k 3D frame packing 720p/1080p24 audio format PCM up to 7.1 ch/192 kHz DSD up to 5.1 channel Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD High Resolution DTS-HD Master Audio Terminals 2 Systems (AV Split Compatible) Diagnostic Video Output RCA Terminal 1 System Audio Output DA Converter ESS Technology ES9018S Analog RCA Output 7.1ch (max) stereo analog XLR output stereo digital output coaxial and optical: PCM Dolby Digital DTS headphone output up to 2ch/192 kHz HDMI input video format (including MHL) 480i/480p/576p/720p/1080p24/1080p25/1080p30 3D frame packing 720p/1080p24 Audio format up to 5.1 ch/192 kHz, or PCM Dolby Digital Dolby Digital Digital Plus DTS and AAC audio format (MHL) up to 7.1 ch/96 kHz PCM Dolby Digital Dolby Digital Plus DTS and AAC audio format (MHL) up to 5.1 ch/192 kHz PCM Dolby Digital Dolby Digital Plus DTS front 1 system (MHL compatible) 1 rear USB input front 1 system (USB2.0) rear 2 systems (USB2.0) audio format PCM up to 7.1 ch/192 kHz DSD USB-DAC input up to 5.1 ch/2.8 MHz USB-B terminal PCM up to 384 kHz DSD size W430 x H123 x D311 mm 7.9 kg
Coaxial digital cable 1.0m BNC plug specification VIDEO BRILLIANCE series. This is a professional coaxial digital cable that is compatible with 1506A. It is originally a digital video cable, but since it is a high frequency cable, it can also be used as an audio digital cable (Tomoho Asae)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: none
Coaxial digital cable 1.0m BNC plug specification VIDEO BRILLIANCE series. This is a professional coaxial digital cable that is compatible with 1506A. It is originally a digital video cable, but since it is a high frequency cable, it can also be used as an audio digital cable (Tomoho Asae)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/23 sales price 25,000 yen Popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. The exterior has a feeling of use such as dullness and small scratches. Serial 11040004 (Tomoho Asaine)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box instruction manual power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
The price has been reduced! 2024/6/22 sales price 188,000 yen*It is cheap because it has a slight tobacco smell. Comes with original box! This current player was born as a model commemorating Denon's 110th anniversary. SACD player equipped with Ultra AL32 processing. A high-fidelity machine with a sense of speed that can handle modern scenes, and the characteristics typical of a modern aircraft with excellent performance have been added. The wide range and the good sense of SN stand out. The exterior has a slight tobacco smell in addition to dullness and small scratches. Serial DBFN052100541 (Hiroshi Aso)
Maintenance information: 2024.6.22 operation confirmed
Accessories: Remote control instruction manual, power cord, connection cable, original box
Main specifications: Playback frequency range 2 Hz to 100 kHz dynamic range 118 dB unbalanced output x 1, digital audio output terminal, coaxial digital output x 1, optical digital output x 1 W434 x H138 x D405 mm 16.5 kg
A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. There is a feeling of use on the exterior, such as fading due to aging (Tomoho Asaine)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
The price has been reduced! 2024/6/22 sales price 29,800 yen ※6 month warranty. DSD compatible network player. An entry model that omits the USB-DAC and aims to reduce costs. It supports high-quality sound playback from a wide range of sources, such as Wi-Fi and Bluetooth. This model is ideal as an introduction to network audio. There is a feeling of wear on the exterior (Tamai Jun)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: Remote control instruction manual, power cable, connection cable, antenna
Main specifications: Compatible sampling rate PCM32 to 192 kHz DSD 2.8/5.6 MHz SNR 110 dB dynamic range 100 dB (PCM, audible band) W440 x H104 x D329 mm weight 6 kg
The price has been drastically reduced. 2024/6/21 sales price 128,000 yen Maintained! LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. There are threads and dullness throughout the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.21 Maintained (each replaced due to faulty switching power supply control IC and capacitor capacity loss. Since an improved type is used as the control IC, a reset capacitor specified by the manufacturer is installed to ensure compatibility).
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
Maintained! The operating product is a Marantz solid state FM/AM receiver, which is extremely rare. Gyro touch tuning unique to the company was adopted to achieve smooth station selection. I'm fascinated by the designs of the good times (Murakoshi Yoichi)
Maintenance information: 2024.6.20 maintenance (cleaning of internal volumes, application of olefin oil, application of complete agent after disassembling each switch, application of olefin oil after contact cleaning polishing/cleaning. High frequency circuit manual adjustment, front escalator disassembly and cleaning)
Accessories: none
Main specifications: 28W+28W PHONO (MM) W407 × H107 × D227 mm 8.2 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/21 sales price 898,000 yen This is the first arrival of the current model MA-2 Hi-Fi from the budding brand “Meitner” founded in 2011 by Canadian engineer Ed Mitner. Adopts an unusual slot-in method. The resolution and wide range are truly high in potential. It has a good balance from high to low frequencies and seems to fit in with various systems. It is in good condition with no noticeable scratches. Serial 6135 (Fujisawa Yukishi)
Maintenance information: 2024.6.21 Operation confirmed (The operation of the remote control and main unit is slightly relaxed, but this is a specification.)
Accessories: remote control, instruction manual, power cord, original box, manual CD
Main specifications: CD player USB-DAC (compatible up to 192 kHz/24 bit, DSD compatible) coaxial digital x 1, USB x 1, USB x 1, W435 x H140 x D400 mm 9.0 kg
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Fujisawa Yukishi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: No accessories
Main specifications: aluminum 15g
It is a digital media transport that is digitally connected to an iPod/iPhone or PC, and can process and output music signals while remaining digital. The operation of the iPod terminal has not been confirmed. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: W205 x H34 x D175 mm 0.53 kg
Cambridge Audio's stylish small pre-main amplifier. In addition to convenient functions with a USB input, it is an amplifier where you can enjoy delicate and modern sound quality with a good sense of sound. The exterior has a slight feeling of use (Hiura Katsuji)
Maintenance information: 2024.6.20 sound output confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) line input 5 systems USB input 1 system W430 × H86 × D350 mm weight 6.0 kg
*Currently sold. An interface that can process and output music signals with a full digital connection. The clear, natural sound at a low price is attractive. *Only USB is checked; iPod/iPhone are unchecked because there are no compatible devices. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: iPod connector, 30-pin dock connector, USB terminal x 1 (TypeB), audio output terminal, 2 digital (optical x 1, coaxial x 1), video output terminal, composite x 1, W215 x H40 x D181 mm, 1.1 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/17 sales price 128,000 yen It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material with excellent magnetization characteristics, drastically improving internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
The disposal price has been reduced! Member discounts are not applicable. 2024/6/17 sales price 49,800 yen tall tower audio rack. Made of powder-coated, scratch-resistant metal and tempered safety glass made in Italy. It has rounded glass front shelves for a custom made look. It includes a management system to hide power cords and interconnect cables. The exterior has a feeling of use such as dullness and small scratches. *Shipping costs will be estimated separately (Asaine Tomoho)
Accessories: none
Main specifications: shelf glass plate thickness 6 mm load capacity 23 kg size 635 x 610 x 1,550 mm weight 46 kg
The price has been reduced! 2024/6/17 sales price 158,000 yen Maintained! Accuphase first generation power amplifier. Unlike today's company's tone, the wild sound with a strong punch is attractive. It goes well with jazz and rock. The exterior has line marks and dullness. Serial L6T748 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (input volume, output relay, semi-fixed VR, etc. replaced. leg exchange. Other switches cleaning, card edge contact cleaning. Solder correction. Wiring restyling. Bias and offset checks. Output audio check. Internal cleaning. Note: The MAIN & REMOTE1 speakers are connected in series. (There is no sound unless both speakers are connected)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 150 W/ch frequency characteristics 20 Hz to 20,000 Hz W445 × H152 × D355 mm 25 kg