Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
The price has been drastically reduced. 2024/5/22 sales price 348,000 yen Everything from the motor power supply to the tone arm has been fully maintained! NEW DUST COVER CREATED! A player with a long-arm Ortofon/AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
The disposal price has been reduced. Member discounts are not applicable. 2024/6/17 sales price 378,000 yen ※Heavy weights are being ordered. The classic model of the belt drive and long arm system, with the SME3012R mounted on the TD-521RW. A very silky sound that resonates loudly and unrelated to vibrations, which strikes the heart of the sound quality of a record player. You can enjoy it with a variety of cartridges regardless of whether they are heavy or lightweight. *Since it is TD-521, there is no ESOS (semi-auto stop) mechanism. In addition to fading on the exterior and overall appearance, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: transport lock, instruction manual power cord
Main specifications: [TD521] belt drive type floating suspension mechanism compatible with 33/45/78 rotations [3012R] long arm static balance universal type effective length 307 mm compatible cartridge dead weight 1.5 to 26 g (excluding shell)
THORENS INSULATOR SET OF 3. It comes with a screw-type height adjustment function, but as expected, it is made in Switzerland, and the accuracy of how the screw rotates is excellent, and correction at extremely subtle pitches is possible. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 35 mm, height 30 to 35 mm, dead weight 53.1 g (actual measurement)
Set of 8 THORENS spike insulators. Use it for amplifiers and speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: original box (does not close due to broken fasteners)
Main specifications: diameter 35 mm height 40 mm dead weight 48.2 g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg