The dust cover is missing. ROTEL record player. It is also recommended for those starting out with semi-automatic audio. Also, the design that blew through is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 maintenance (belt replacement, arm operation, voice check)
Accessories: cartridge
Main specifications: W436 x H130 x D350 mm 4.8 kg (actual measurement)
Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test)
Accessories: none ※remote control missing
Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
The price has been drastically reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1ohm diaphragm without scratch) DCR (B/6.3ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
The price has been reduced! 2024/6/14 sales price 26,800 yen The stand is made of magnesium alloy, and the top plate and bottom plate have a structure made of aluminum and steel plywood. Ultrafine sand is encapsulated inside the pillar and thorough anti-vibration treatment has been applied (Asae Tomo Law)
Accessories: none
Main specifications: top plate W160 x D210 mm bottom plate W220 x D270 mm height 700 mm weight 8.5 kg
The price has been reduced. 2024/5/15 sales price 89,800 yen All 6 woofers and midrange have had their edges replaced! A European-designed tall boy speaker that drastically changed the image of JBL. The combination of gentle treble and unobtrusive low frequencies is truly European modern. It's a great speaker for listening to female vocals and small-group classical music. There are dents, line marks, etc. on the top plate and sides (Oikawa Tetsuji)
Maintenance information: 2024.5.15 maintained (2108H edge replacement and disconnection repair, 2105 edge replacement)
Accessories: jumper plate
Key Specifications: 3 Way 4 Speaker Crossover 300Hz/3KHz 91dB 6Ω W273 × H1130 × D342 mm 25.0 kg
RCA cable 0.7 m pair 6N copper+OFC hybrid collet chuck plug has no prominent characters, and it is a cable that allows you to enjoy music naturally. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
※Inexpensive because it is in poor condition. YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. In addition to the exterior and logo plate being misaligned, there is a lot of feeling of use, such as dullness, conspicuous abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/11 sales price 118,000 yen ※It's cheap because it doesn't have a hood. Maintained! Vacuum tube stereo power amplifier. The bright and fresh sound typical of DYNACO is attractive. This is an amplifier I want to play in combination with JBL, Altec, etc. The grill is missing, and there is a feeling of use due to aging (Daiki Goto)
Maintenance Information: 2024.4.11 Maintained (· Block Capacitor 30/20/20 μF Defect Replacement · Stereo/Mono Switch Defect Replacement · Shock Noise Improvement Measures → Spark Killer Addition · Vacuum Tube 7199 Noise Exchange · Mylar Capacitor 390pF Deterioration Replacement 2 · Resistors 1/2 W Deterioration Replacement · BIAS Readjustment · Vacuum Tube Socket and RCA Jack Caulking Repair. *Other operation checks have been performed (measured at 32 to 41 W SP: 8 Ω at rated output AC 100 to 117 V)
Accessories: instruction manual
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
The disposal price has been reduced. Member prices are not applicable. 2023/10/23 sales price 29,800 yen ※Currently sold. Comes with a special case! Portable headphone amplifier with built-in D/A converter. DSD256 (11.2 MHz/1 bit) PCM supports native playback of up to 768 kHz/32 bit. Please enjoy the sound quality unique to a thick mojo in the mid to low range. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2023.10.23 Operation confirmed
Accessories: original box
Main specifications: output level 35 mw/600 ohm, 720mw/8 ohm, output impedance 0.075 Ω, dynamic range, 125 dB input system, 3 optical systems, 1 coaxial x 1, microUSB x 1 output system, 2 output systems, headphone jack x 2, charging time, approx. 5 hours continuous operation time, approx. 8 hours W82 x H60 x D22 mm 180 g
Maintained in 2023/5! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is extremely easy to use. The exterior has a feeling of use such as dullness. Serial 200213 (Tomoho Asaine)
Maintenance information: 2023.5.11 Maintained (power supply fuse replacement, other sound output during confirmation, transistor and capacitor replaced to confirm Chilean noise, current output test after parts replacement)
Accessories: copy of instruction manual
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg
Maintained in 2023/12! A stereo power amplifier that takes into account ease of use in multi-channel systems, a must-see for multi-channel systems! Contrary to its cute size, it has quite a bit of driving power. The sound is energetic and fresh, just like Sony of this era. There is a feeling of use on the exterior such as line damage or dullness. Serial 205245 (Tomoho Asaine)
Maintenance information: 2023.12.5 maintained (power supply micro SW deterioration replacement, semi-fixed VR replacement for bias adjustment, input RCA terminal L/R poor contact exchange transistors with noise at 2 locations, other DC bias adjustment connection sound confirmation)
Accessories: none
Main specifications: 40W+40W (8Ω) W200×H149×D320 mm 6.5 kg
Output transformer sales secondary: 50-100-200Ω x 2 ※ The primary side seems to be 5 kΩ from the model number. The resistance value has been measured by the tester (between P1-P2:141.8 Ω, between P1 (P2) -B: 71.0 Ω, between 0-50 Ω: 8.2 Ω, between 0-100 Ω: 11.5 Ω, between 0-200 ohms: 16.1 Ω) W110 x H150 x D80 mm 3.6 kg/pcs (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke )
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 from the structure, and the printing was determined to be a reprint. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 44 (rejected value 32) with a replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube 6L6GC compatible ball high reliability tube made in America lot: 8526/8526 measured value 44/42 (rejected value 25) with replacement box*Pairs are determined based on GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
This is a 4-tier rack with GS-601 attached to Hayami's popular rack GS-611. You can remove the GS-601 and use it as a 3-tier according to your preferences. Since it has a sturdy construction, it is an ideal car for heavyweight amplifiers, etc. There are bumps and small scratches. One cap to hide the screw hole on the top is missing (Sasaki Shota)
Accessories: none
Main specifications: GS-611: W627 x H523 x D584 mm weight 38.05 kg load capacity: top plate 150 kg shelf board 50 kg bottom plate 150 kg GS-601: W625 x H270 x D570 mm weight 12.1 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The cantilever is slightly to the right (Sasaki Shota)
Maintenance information: 2024.6.13 Sound output operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Maintained! More than 50 years have passed since the release of Sony's vintage pre-main. The innocent tone doesn't make you feel stressed is good, and the balance from treble to bass is good, and the tone control response is good. The retro-futuristic design is also impressive. *This unit does not use a speaker protection relay, so it may make an abnormal noise when the power is turned on and off, but this is a specification. There is a scratch on the cabinet on the exterior (Sasaki Shota)
Maintenance information: 2024.6.13 maintained (board repair due to poor contact within the TONE board, 4 transistors with PHONO noise were replaced, adjusted semi-fixed VR due to unstable idling voltage, contact repair due to poor contact with each push SW contact, and volume slide VR disassembly and cleaning were performed.)
Accessories: none
Main specifications: 35W+35W (8Ω) input sensitivity/impedance Phono 1.2mV/47kΩ Phono 2 system Tuner 1 system AUX 2 system Tape 2 system AC100V, 50 Hz/60 Hz 100 W 400 x H149 x D316mm weight 9.8 kg
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 based on the structure. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 36 (rejected value 32) with replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. The exterior is dull. Serial 5997 (Yonejima Satoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
1650 series SACD/CD player. It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. In addition to stains on the exterior and front panel, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. It's also a great model for getting started. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: connection cord
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Unspecified set of 4 banana plugs If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Ferrite Core Noise Filters Set of 10 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The price has been drastically reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 maintenance completed (protector circuit capacitor replacement, output relay replacement, phono and pin jack polishing, input selector, etc., switch disassembly polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor switch), each volume, switch cleaning, internal inspection and cleaning, adjustment inspection, operation confirmation, running test)
Accessories: instruction manual (copy)
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
Comes with original box and hex wrench Set of 4 Y lugs Oyaide's screw-fastening Y lug terminals are made in Japan with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There is little feeling of use (Oikawa Tetsuji)
Accessories: original box, hex wrench
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
Power cable 1.5m 7N copper conductor, custom-made plug and connector using stress-free treated beryllium copper, an advanced model of the company's power cable. The clear tone without stagnation and the sense of sound pressure are amazing. There is a fine scratch on the plug cover (Kojima Yosuke)
Accessories: none
*The stylus is a SHURE VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Tomonori Asae)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
A record cleaner that indirectly imparts moisture to the case by adsorbing liquid onto the sponge inside the case. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
The price has been reduced! 2024/6/8 sales price 19,800 yen ※Currently sold. Denon's 755 series has excellent cost performance. Even in this price range, the sound quality is as bright and thick as Denon. Furthermore, it is equipped with a USB terminal, so it is possible to play back iPods and USB memory devices. You can see a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.6.8 operation confirmed
Accessories: remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz W434 × H107 × D279 mm 4.2 kg
From exterior painting to driver gap cleaning, it has been refreshed and maintained with attention to detail! The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. The emblem is missing. It has a beautiful finish due to exterior maintenance (Tomoho Asaine)
Maintenance information: 2024.2.29 maintenance (exterior repair/gray paint, front and rear baffle repair/painting, horn painting, new saran net creation. Woofer maintenance (edge replacement, cone paper coating, center cap replacement) mid maintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning/screw replacement) tweeter maintenance (magnetic circuit gap cleaning, terminal contact cleaning/screw replacement) network maintenance (frequency characteristic check, terminal cleaning/screw replacement) (Cleaning, ATT disassembly and cleaning, internal cable extension processing).
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
A line cable that uses high-purity oxygen-free copper (OFC) wire as a balanced cable with a 1.5m pair of core wires and shielded wires. It's a neutral sound that brings out the individuality of the amplifier or player. The exterior is dull and dirty on the plug and sheath (Kojima Yosuke)
Accessories: none
The 1.5 m pair EQB5 balance cable features a high contrast expression rich in three dimensions, and the gorgeous sound is attractive. The cable coloring is also gorgeous and unique. There is friction on the plug shell (Kojima Yosuke)
Accessories: none
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 86/84 (rejected value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Speaker cable 1.5 m pair end is an abnormally thin cable for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
1 pair of unspecified speaker terminals. The construction is solid. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. On the exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen, such as dullness and scuffs on the entire surface (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A subwoofer directly related to ONKYO's flagship. Exterior, rubber is attached to the four corners of the top plate, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: frequency characteristics 32 Hz to 1 kHz W225 × H295 × D310 mm 7.1 kg
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.9 continuity confirmed
Accessories: none
The disposal price has been reduced! Member prices are not applicable. 2024/4/22 sales price 128,000 yen Maintained! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between the freshness and richness of character. You can enjoy a calm, high-quality sound when paired with the same speakers made in England (Murakoshi Yoichi)
Maintenance information: 2024.4.18 maintenance (internal all checks, power supply filter C ± B bypass C replacement, balance VOL cut off sound → cleaning, check each board)
Accessories: 2 DIN input cords, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 2 TAPE2 systems (DIN input or more), 1 PHONO input system, Phono sensitivity 1m/3m/10mV switching W321 x H103 x D203 mm 4 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/17 sales price 128,000 yen Maintained! Quad control amplifier The famous machine 44 has been refreshed by changing the back terminal to an RCA specification that is easy to handle. It's a perfect balance between freshness and richness. When paired with speakers made in England, you can enjoy a calm, high-quality sound (Daiki Goto)
Maintenance information: 2024.4.17 maintained (internal all check, B-filter capacitor deterioration, +- 18V drive Tr leak large, rectifier diode failure instability → replacement power SW spark killer broken → replacement. C and R checks within each board. *There is a sound leak at main volume 0. (Create 2 1.5m DIN5 cables)
Accessories: copy of instruction manual, power cable, connection cable
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/6/1 sales price 118,000 yen Maintained! This is QUAD's first transistor preamp. The dark tone, with a sweet sense of humidity, is the British sound itself. The combination with the company's 303 power amplifier is also an attractive system. You can see the exterior, discoloration of the letters, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 maintenance completed (poor contact with connectors such as internal PHONO board/LINE board, etc. → pin caulking, contact polishing, other internal board coupling C replacement, operation check)
Accessories: copy of instruction manual, power cord, connection cord
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 84/84 (rejected value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. Stains are conspicuous on the exterior and front panel, and a feeling of use can be seen throughout, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.31 Operation confirmed
Accessories: remote control
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
The price has been drastically reduced! 2024/5/25 sales price 99,800 yen Maintained! Professional A version (8 ohm specification) of the LE15. It is a woofer that has good response and allows you to enjoy a dry, tense sound. There is only one unit developed for monitors, and it is a unit that can handle large inputs. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (edge replacement, operation check)
Accessories: No accessories
Main specifications: 38cm cone woofer Alnico 8Ω (measured DC value 7.0Ω/6.9Ω) 150W crossover 800Hz baffle opening diameter 355mm screw pitch (diagonal) 370 mm