Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
Disposal prices have been reduced. Member discounts are not applicable. 2021/4/10 sales price 2,000 yen. Remote cable 2.0m A remote cable that can synchronize the power switch between the company's control amplifier 035 and the power amplifier 036. It is connected from DC-OUT of 035 to DC-IN of 036 and works in conjunction with 035 operation. (Kondo Hirotsugu)
Maintenance information: 2021.4.4 Linkage confirmed by the company 035 and 036
Accessories: none
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
1 sold bi-triode power tube made in the USA JAN measurement value 58 (rejection value 40) with original box ※ Measured value is gm value measured by tv-7 tester (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
The price has been drastically reduced. 2021.6.23 sales price 49,800 yen ※Conductivity has been confirmed, but since the terminal has not been treated and the ground wire is broken, it is currently sold. Exclusive tone arm for DECCA MARK 1/2/3 cartridges. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal state for the head of the company (Murakoshi Yoichi)
Maintenance Information: 2021.6.13 Continuity Confirmed
Accessories: armrest
Main specifications: static balance type, total length 303 mm, execution length 225 mm
I cut the price. 2021/8/30 selling price 49,800 yen rare! Decka's Gramophone Rally is Hi-fidou's first arrival. The turntable is smaller than the board, and the sound has a sense of scale in the UK with a compact body. The atmospheric design, retractable needle case and spring handle are very attractive. Unknown details (Yoichi Murakoshi)
Maintenance information: 2021.8.30 sound confirmed
Accessories: replacement needle
Main specifications: W155 × H280 (350 with the lid open) × D375mm 5.5kg
Sound can be produced, but there is uneven rotation and sound cracking, so it will be sold as it is. The volume is not loud, but it has a soft tone that creates a nostalgic atmosphere. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 Operation confirmed
Accessories: handle, paper horn
Main specifications: W278 × H78 × D300mm 3.7kg (actual measurement)
The disposal price was lowered. Member discounts are not applicable. 2021/11/27 Selling price 148,000 yen The product around 1920 features a telescopic tone arm, needle pressure, and volume adjustment possible. 2-spring, oval straight horn The volume is not large, but the tone is delicate and coherent. The rotation is relatively stable, but there is sound cracking, so it is currently sold. The appearance has dirt scratches of age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 operation confirmed
Accessories: handle
Main specifications: W440 × H380 × D520mm 17.9kg (actual measurement)
The winding of the mainspring is smooth and can produce sound, but there is rotation noise, unevenness, and sound shake, so it is sold as it is. The volume is not big, but I feel good in the middle and high range center. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.1 operation confirmed
Accessories: handle
Main specifications: W358 × H260 × D295 6.85kg (actual measurement)
The winding of the mainspring is smooth and can produce sound, but the platter swells, and there is no screw in the hinge and the lid comes off, so it is sold as it is. The volume is not big, but I feel good in the cohesion of the sound. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.8 operation confirmed
Accessories: handle
Main specifications: W400 × H335 × D470 11.95kg (actual measurement)
The price has been reduced. 2021/12/19 sales price 1,000 yen. ※There was a sound, but details such as characteristics have not been checked. Dynamic microphone made in China with standard specifications. How about an easy way to use it for a wide range of purposes other than vocals? Total body length 165 cm, 210 g (Murakoshi Yoichi)
Maintenance information: 2021.11.28 sound output confirmed
Accessories: none
※Shipping service Special Feature: Analog Playback Is Hot Now, Best Selection of Playback Devices, Analog Drunk Madmen, Basic Setting Techniques/Middle Class to Bring Out the Appeal of High-Resolution Sound Sources [By Type] Speaker Selection/New Autumn Model Thorough audition/Listen to new topical products/2019.9.4 issue.
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
Special Feature = All of the power supplies and accessories that are currently being talked about are full of techniques to demonstrate the power of your equipment! /Power supply maintenance and introduction effect, case report/Research on accessories to bring out better sound/H.23.8.15 issue
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg