※6 month warranty Mount Altec's 405-8B full range unit in a self-made backload enclosure. The enclosure is well-built. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: saran net
Main specifications: W200×H460×D220mm 6.6kg (actual measurement)
This is the best step-up transformer for use with all Shelter MC phono cartridges. It boosts the music signal from the MC phono cartridge without adding extra color. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: none
Main specifications: input impedance 15 ohms or less (maximum 25 ohms) output impedance 47 KΩ boost ratio 32 dB W142 × H66 × D106 mm 1 kg
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound becomes a habit. The exterior is in a beautiful state due to maintenance. Serial 32648 32951 (Yamato Yuki)
Maintenance information: 2024.6.7 operation confirmed
2021.10.15 Maintained (exterior cleaning/repair saran frame painting/net replacement cone paper touchup/tweeter grill dent correction ATT cleaning unit detachable)
2012.1.27 Maintained (ATT replacement, capacitor replacement, input/output waveform and balance check, sound output check, frequency characteristic measurement, front baffle repair (touch-up painting), exterior cleaning, plate attachment (not completely flat because there were already quite a few wrinkles)
Sound output test)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. There is a light thread on the top of the exterior. Serial 13466 13432 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 sound output confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
Both the interior and exterior have been maintained! Grey version of 4312MK2. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. The exterior has been beautifully finished due to maintenance. Serial J372-010877 J373-011514 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 maintained (exterior cleaning and touch-up saran frame painting and net replacement tweeter maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, internal urethane replacement, grill and screw coating, rubber ring replacement) mid-maintenance (corn paper repair and coating) ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior has dullness, small scratches, and threads. Serial 00687/00688 (Yonejima Satoshi)
Maintenance information: 2024.6.11 sweep test good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
A masterpiece of studio monitors that has been refreshed through internal and external maintenance. A gray finish model with a nice sharp sound. The sound is energetic, sharp and sharp, and the sound image is unrivaled even when compared to the 4343. The All Alnico unit has excellent sharp sharpness in the high range, and you can listen comfortably not only on the horn but also by playing the piano (Tamai Jun)
Maintenance information: 2024.6.22 maintained (exterior deposit removal repair gray paint front and rear baffle repair/paint saran frame paint plate repair net replacement horn diffuser cleaning woofer maintenance (edge replacement/cone paper coating) driver maintenance (magnetic circuit rust removal gap cleaning center adjustment sound absorbing material replacement terminal cleaning screw replacement) tweeter maintenance (frame painting Magnetic circuit rust removal gap cleaning terminal cleaning screw replacement)
Unit detachment network maintenance (frequency characteristic switching SW/ATT cleaning terminal cleaning/screw replacement) operation confirmation)
Accessories: saran net, diffuser
Main specifications: 3-way 3-speaker bass reflex type usage unit 2231A 2420 2405 8Ω dimensions W619 x H778 x D514 mm weight 59 kg/unit
From exterior painting to driver gap cleaning, it has been refreshed and maintained with attention to detail! The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce sound sources recorded with on-mic recordings regardless of age or genre. The emblem is missing. It has a beautiful finish due to exterior maintenance (Tomoho Asaine)
Maintenance information: 2024.2.29 maintenance (exterior repair/gray paint, front and rear baffle repair/painting, horn painting, new saran net creation. Woofer maintenance (edge replacement, cone paper coating, center cap replacement) mid maintenance (edge replacement, cone paper coating) driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal contact cleaning/screw replacement) tweeter maintenance (magnetic circuit gap cleaning, terminal contact cleaning/screw replacement) network maintenance (frequency characteristic check, terminal cleaning/screw replacement) (Cleaning, ATT disassembly and cleaning, internal cable extension processing).
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Full maintenance has been completed, from exterior repairs to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.25 Maintenance completed (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net replacement/frame repair, diffuser repair. Woofer edge replacement/cone paper coating,
Mid-edge replacement/cone paper coating, driver magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter magnetic circuit gap cleaning, terminal/screw cleaning. Network frequency characteristic check, ATT cleaning, single-sided resistor x3 replacement, terminal cleaning/screw replacement)
Accessories: saran net, diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
Full maintenance from exterior to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unrivaled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Tamai Jun)
Maintenance information: 2024.6.22 maintained (exterior repair/polishing/oil finishing before and after baffle coating saran frame paint net replacement plate repair horn cleaning diffuser cleaning/painting woofer maintenance (edge replacement cone paper coating)
Midmaintenance (edge replacement cone paper coating)
Driver maintenance (magnetic circuit rust removal/in-gap cleaning center adjustment, sound-absorbing material replacement terminal cleaning/screw replacement) tweeter maintenance (frame coating magnetic circuit rust removal gap cleaning terminal cleaning screw replacement)
Unit detachment network maintenance (frequency characteristic check, SW/ATT cleaning, terminal cleaning screw replacement) operation check)
Accessories: saran net
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
Full maintenance completed both inside and outside! The early model 4350, which has been in stock for the first time in a long time, is here! Comes with Chandeva (5232). The low frequency that seeps through the five organs and six organs has a presence unique to the heyday of JBL, which cannot be enjoyed today. In particular, the wind pressure in the ultra-low range is overwhelmingly attractive. Due to multiple specifications, 2 stereo power amplifiers are required. The exterior has been beautifully finished with maintenance. Serial 10310/10311 (Yonejima Satoshi)
Maintenance information: 2024.6.20 Maintained (driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: horn/horseshoe coating, magnetic circuit gap cleaning, terminal cleaning/screw replacement. Woofer maintenance: edge replacement/cone paper coating, terminal cleaning/screw replacement. Midmaintenance: corn paper coating, terminal cleaning and screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement. Exterior repair and gray paint. Front and rear baffle/hakama repair/painting, horn painting. Saran net replacement, frame repair. Unit detachment and diffuser repair.)
Accessories: saran net, channel divider (JBL 5232), diffuser
Main specifications: 4-way, 5 speakers, bass reflex system, floor-type playback frequency band 30 Hz to 20,000 Hz, crossover frequency 250 Hz, 1,100 Hz, 9,000 Hz, output sound pressure level 95.5 dB, allowable input 250 Hz or less, 200 W/250 Hz or more, 100 W size W1,210 x H889 x D508 mm, weight approx. 110 kg/bottle
The disposal price has been reduced. Member prices are not applicable. 2024/4/17 sales price 128,000 yen Maintained! Quad control amplifier The famous machine 44 has been refreshed by changing the back terminal to an RCA specification that is easy to handle. It's a perfect balance between freshness and richness. When paired with speakers made in England, you can enjoy a calm, high-quality sound (Daiki Goto)
Maintenance information: 2024.4.17 maintained (internal all check, B-filter capacitor deterioration, +- 18V drive Tr leak large, rectifier diode failure instability → replacement power SW spark killer broken → replacement. C and R checks within each board. *There is a sound leak at main volume 0. (Create 2 1.5m DIN5 cables)
Accessories: copy of instruction manual, power cable, connection cable
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The disposal price has been reduced! Member prices are not applicable. 2024/4/22 sales price 128,000 yen Maintained! A famous machine 44 with an easy-to-handle RCA terminal added to the rear terminal of the Quad control amplifier. The British QUAD's small preamp is a perfect balance between the freshness and richness of character. You can enjoy a calm, high-quality sound when paired with the same speakers made in England (Murakoshi Yoichi)
Maintenance information: 2024.4.18 maintenance (internal all checks, power supply filter C ± B bypass C replacement, balance VOL cut off sound → cleaning, check each board)
Accessories: 2 DIN input cords, power cord, instruction manual (copy)
Main specifications: 2 LINE inputs, 2 TAPE2 systems (DIN input or more), 1 PHONO input system, Phono sensitivity 1m/3m/10mV switching W321 x H103 x D203 mm 4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/8/22 sales price 800 yen ※Quality cannot be guaranteed because deterioration due to long-term storage can be seen. Nagaoka replacement needles are compatible with COLUMBIA DSN-16 (Hiroki Aso)
Maintenance Information: 2023.8.24 Operation has not been checked
Accessories: case
The disposal price has been reduced. Member discounts are not applicable. Fully overhauled on 2024/2023/12/13! A JBL professional series speaker that combines the mid-high range of a biladial horn, which is characterized by wide directional characteristics, and a 38cm woofer with excellent low frequency reproduction. It is possible to combine high range stretchability while maintaining 2-way mid-range energy in response to professional field requests. You can enjoy a variety of music, mainly jazz, with excellent punching power that cannot be heard on current speakers. ※The notation on the terminal board has disappeared (Mizushima Itsuro)
Maintenance information: 2023.12.12 Maintained (exterior repair, polishing, oil finish, front and rear baffle, hakama, horn repair, painting. Saran net replacement. Woofer edge replacement/cone paper coating. Driver magnetic circuit gap cleaning, center adjustment, sound-absorbing material replacement, terminal cleaning. Network frequency characteristic check, ATT cleaning, terminal and other contact cleaning)
Accessories: saran net
Main specifications: 2 way bi-radial horn 2235H/2421A 93db W556 × H908 × D480 mm 79.5 kg
Fully maintained! 2-way floor speaker with double woofer (stagger) +1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.6.20 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn paint, saran net replacement, woofer maintenance: edge replacement/cone paper coating, terminal cleaning/screw replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching (SW cleaning, terminal cleaning/screw replacement unit detachable)
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
4530BK made by Shinkosha. Since there are many chips and scratches throughout, it is inexpensive. The D130 was mounted. Woofer with MA15 fastener! Powerful bass reproduction far exceeding size is possible with the rear loading horn type enclosure (Sasaki Shota)
Accessories: MA15
Main specifications: screw pitch 420 mm hole diameter 360 mm plate thickness 40 mm front baffle plate thickness 22 mm W600 x H1250 x D600 mm 56.3 kg (all measured)
The price has been reduced. 2024/6/16 sales price 79,800 yen The company's standard front load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
It has a strong tobacco smell and is inexpensive because it has many scratches and veneer peeling. The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. ※The trolley is not included (Sasaki Shota)
Accessories: nothing
Main specifications: front load horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
4560BK type domestic enclosure. The JBL woofer E145-8 was mounted when it arrived. The construction is solid. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch approx. 260 mm, unit mounting aperture diameter approx. 380 mm, measured size W760 x H915 x D608 mm (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
Choke transformer inductance 10H/120mA W75 x H91 x 69 mm 1.5 kg (actual measurement, terminal part not included) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
Choke transformer inductance 10H/120mA W75 x H91 x 69 mm 1.5 kg (actual measurement, terminal part not included) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
The price has been reduced! 2024/3/31 sales price 1,000 yen exchange needle for Nagoya. This is a Victor DT-ZL1S compatible product. Since there are no compatible cartridges, they have not been checked. *Quality cannot be guaranteed due to deterioration due to long-term storage (Takahashi Nobuyuki)
Maintenance information: 2024.3.31 unchecked
Accessories: case
Oxygen-free copper (OFC) is used as the untreated conductor at the 6.0 m end of the speaker cable, and the 4-core structure reduces radiation noise. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
Officially imported from Scantech LYRA CONNOISSEUR version 5-0L is now in stock. A flagship designed by Jonathan Carr like the previous one. Not only is the transparency and high SNR feel, but the smooth fine particle feel in the mid to high range is excellent. It has a supple and nice tone, and makes me listen to music clearly. The exterior has scratches and small scratches on the top plate. Serial.C50L4028 (Yonejima Satoshi)
Maintenance information: 2021.7.13 manufacturer maintained (attenuator disassembly and cleaning, board adjustment, wiper replacement adjustment, grease application. Selector disassembly cleaning, wiper adjustment. (Characteristics check, running check OK)
Accessories: instruction manual, power cord
Main specifications: main body W400 x H105 x D320 mm power supply unit W400 x H130 x 4D30 mm weight main body 10.5 kg power supply unit 28.5 kg
The price has been drastically reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The price has been drastically reduced! 2024/5/8 sales price 30,000 yen ※The exterior is in poor condition, so it's cheap. This is Altec's classic 1 inch 4-sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The price has been reduced. 2024/5/10 sales price 99,800 yen Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
The price has been drastically reduced. 2024/3/2 sales price 99,800 yen Maintained! professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.2 maintained (internal dismantling all check, Tr, C, R check, ±B INPUT bypass C replacement, Tr, R, etc., all OK, INPUT photocoupler check, operation check)
Accessories: copy of instruction manual, power cord, dedicated SP cord (cable length 2.5 m)
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
Power transformer primary: 90-100-110V secondary: 6.3V-CT/3A 6.3V/3A 5V/2A x 2 12.6V/1A 50V/20mA 385-290-0-290-385V/320mA W122 × H105 × D102 mm 6 kg (actual measurement, not including protrusions) There are fine line damage and paint fading (Kojima Yosuke)
Accessories: none
Pair tube 6L6WGB compatible ball Russian short base measurement value 42/42 (rejected value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube 6L6WGB compatible ball Russian short base measurement value 42/42 (rejected value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
1 sold bi-triode power tube made in the USA JAN measurement value 58 (rejection value 40) with original box ※ Measured value is gm value measured by tv-7 tester (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
Pair Tube Bi-triode Power Tube Made in USA JAN Measurement Value 60/60 (Rejection Value 40) With Original Box ※ The pair is judged based on GM value measured on the tv-7 test machine (Yosuke Kojima)
Accessories: original box
The price has been reduced. 2024/5/23 sales price 79,800 yen Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
The price has been reduced. 2024/5/19 sales price 54,800 yen ※Currently sold. JBL/UREI professional power amplifier Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. There are conspicuous abrasions on the exterior and top plate, and a feeling of use such as dullness and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
Pair tube triode metal base, made in America, original with box ※ The pair was determined based on the EM value measured by the SENCORE TC-162 tester (Kojima Yosuke)
Accessories: original box
Pair tube, triode, metal base, made in America, with original box*Pairs are determined based on EM values measured by the SENCORE TC-162 testing machine (Kojima Yosuke)
Accessories: original box
Pair tube, metal, brown base, made in America, measured value 66/64 (rejected value 44) with original box (some written), sticker is attached to the base part, and there is a getter burn ※ The pair was determined based on the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube metal brown base Russian dharma tube measured value 60/58 (rejected value 44) with white box, printing on one side often disappears ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube, KT88 compatible ball, American metal base, measured value 66/64 (rejected value 44) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube KT88 compatible ball American metal base measurement value 58/52 (rejection value 44) There is getter burn and loss on one side, and there is dullness on the base on the other side ※The pair is judged based on the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: none