The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
Unspecified set of 2 wood blocks 30mm square insulator cube It is similar to Yamamoto Sound Crafts's QB-1, but it is smaller than the QB-1 and the details are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Main specifications: W30 x H30 x D30 mm 28.6 g (actual measurement)
Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
Maintained! ONKYO premain amplifier with high cost performance. A non-feedback power amplifier is used, and the power supply transformer is of high quality and carefully crafted. The power amplifier direct position allows direct input to the power amplifier via volume only. The exterior is dull. Serial 4604014114 (Yonejima Satoshi)
Maintenance information: 2024.2.15 Maintained (input selector, direct switch, etc. Switch disassemble contacts, polish contacts and apply contact cleaner. Main amplifier circuit input circuit soldering correction)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) PHONO input 1 system (MM/ MC switching) W445 x H165 x D434 mm 18.0 kg
This is a firm conductor cable with a shape similar to a Siltec cable using a 3.0 m pair XLR cable with a plug manufactured by SwitchCraft. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
RCA-XLR conversion cable 2.0m pair is a cable with a firm conductor similar in shape to a Siltech cable using a plug manufactured by Hotswitch Craft Co., Ltd. 2. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.6.17 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/6/17 sales price 128,000 yen It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material with excellent magnetization characteristics, drastically improving internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
The disposal price has been reduced! (Member price not applicable) 2024/6/18 sales price 228,000 yen speaker cable, 3.0 m pair, banana plug on both ends, the company's best speaker cable. The high level of detail and the smooth mid-high range texture are a style unique to high-end aircraft. Some banana terminals have been changed to different ones. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: No accessories
*Remote control is missing (VR adjustment with remote control is not possible due to VR replacement). Maintained! An advanced ESL series aircraft, a heavyweight premain with a high-rigidity G chassis. Equipped with a MOS FET, the sound is spacious and powerful. The exterior is dull and has small scratches (Ryo Mizusaki)
Maintenance information: 2024.6.21 maintained (mute push SW replacement, main VR with sound replacement, other speaker relay deterioration replacement, input switching, all tact SW replacement due to poor SW contact, other resistors 120Ω, 100Ω deterioration replacement, other sound direct SW disassembly contact polishing cleaning, speaker switching SW, stereo/mono switching SW, direct INPUT switching SW, direct INPUT switching SW disassembly contact polishing cleaning grease application, DC bias (The DC balance has been adjusted and the sound output for each input/output connection has been confirmed)
Accessories: copy of instruction manual
Main specifications: output 170W+170W (4Ω) 140W+140W (6Ω) 120W+120W (8Ω) W470 x H170 x D435 mm 24 kg
The price has been reduced! 2024/6/22 sales price 188,000 yen*It is cheap because it has a slight tobacco smell. Comes with original box! This current player was born as a model commemorating Denon's 110th anniversary. SACD player equipped with Ultra AL32 processing. A high-fidelity machine with a sense of speed that can handle modern scenes, and the characteristics typical of a modern aircraft with excellent performance have been added. The wide range and the good sense of SN stand out. The exterior has a slight tobacco smell in addition to dullness and small scratches. Serial DBFN052100541 (Hiroshi Aso)
Maintenance information: 2024.6.22 operation confirmed
Accessories: Remote control instruction manual, power cord, connection cable, original box
Main specifications: Playback frequency range 2 Hz to 100 kHz dynamic range 118 dB unbalanced output x 1, digital audio output terminal, coaxial digital output x 1, optical digital output x 1 W434 x H138 x D405 mm 16.5 kg
Valuable brand new and unused item! I opened it for photography and confirmation of operation. A popular model of Japanese record players. The chassis is tightly solidified into a heavyweight platter and a high-torque direct drive motor that rotates accurately and incomparably. It is a model that can be said to be the crystallization of Japanese craftsmanship, which has been thoroughly built using the direct attack method and enhanced physical characteristics. The heavy, thick sound that cannot be enjoyed with current direct drive players is attractive. The cover interferes slightly with the quartz lock indicator when the dust cover is opened and closed, but the current situation is. On the outside, there is mold floating on the platter. Serial E018872ZP (Fujisawa Yukishi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: instruction manual, original box, head shell, handle, complete set of tools
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W545 x H230 x D417 mm 28 kg