Maintained! A shell round needle model. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. The exterior has dullness etc. due to use over time (Asaine Tomo)
Maintenance information: 2024.6.28 Maintained (pedestal installation, damper adjustment)
Accessories: original box needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Maintained! A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.28 Maintained (vibration system replacement shell replacement)
Accessories: original box
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Optical digital cable 1.0 m uses high-purity quartz to eliminate phase disturbances and distortions as a square conductor. This is the best cable for those looking for a high quality optical cable. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: no accessories
An A-shell oval needle characterized by the SPU's original direct sound. The firm, strong mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. The needle cover is partially chipped. Serial 412790 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
For the first time in this class, silver wire and a solid elliptical needle were used as power generation coils. Also, the combination of the Boron cantilever used only in higher-level models and the Shibata needle stylus tip is excellent, and by combining this with an Aucurum (gold-plated 6N high purity conductor) power generation coil, the sound is one rank higher. The sound creation, which has a wide range yet is also moist, is truly amazing. The cantilever is leaning towards the right. Also, there is a slight crack on the back (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV frequency band 20 Hz to 25,000 Hz needle pressure 2.3 g dead weight 9 g impedance 20 ohms
SPU-A shell conversion plug It is an adapter that allows an A shell type cartridge with a short pitch to be attached to a general tone arm (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
A thick, highly rigid heavyweight shell prepared by Orthophone for cartridges other than the SPU series. It is an easy-to-use headshell with a flat cartridge ground surface and excellent adhesion (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
For the first time in this class, silver wire and a solid elliptical needle were used as power generation coils. Also, the combination of the Boron cantilever used only in higher-level models and the Shibata needle stylus tip is excellent, and by combining this with an Aucurum (gold-plated 6N high purity conductor) power generation coil, the sound is one rank higher. The sound creation that is both moist while having a wide range is truly amazing (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: original box, needle cover, instruction manual, mounting screws
Main specifications: MC type output voltage 0.5 mV frequency band 20 Hz to 25,000 Hz needle pressure 2.3 g dead weight 9 g impedance 20 ohms
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. There are no noticeable scratches, but the needle cover is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: instruction manual, original box
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Ethos (Ethos), limited to 500 pieces worldwide, is now in stock! SPU Ethos was born as the culmination of an unchanging spirit that has been passed down for over 60 years, refined with the latest technology. The classic SPU sound shines even more, captivating analog fans. The exterior is generally good. Serial 037430 (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: Output voltage (1 kHz 5 cm/sec): 0.3 mV channel balance (1 kHz) 1.0 dB channel separation (1 kHz) 20 dB channel separation (15 kHz) 10 dB frequency characteristics (20 Hz-25,000 Hz) ± 2 dB tracking ability (315 Hz, 70 μm under proper needle pressure Horizontal compliance: 8 μm/Mn stylus type Nude Elliptical Stylus Tip Radius: r/R 8/18μm Cantilever Material Aluminum Suitable Needle Pressure: 4.0g Needle Pressure Range: 3.0-5.0 g Tracking Angle 20° Internal Impedance 3.5Ω Recommended Load Impedance 10Ω or More Coil Wire 8N High Purity Copper Cartridge Shell Wood Powder and Resin Composite Material Dead Weight 32g
Comes with original box It is the SPU “number one” newly created with the goal of reproducing the thickness and thickness of the sound of old SPUs of yesteryear. Among them, the #1S uses a round needle, and it is a cartridge with a wide range added (Sasaki Shota)
Maintenance information: 2024.6.22 sound output operation confirmed
Accessories: original box, manual, needle cover
Main specifications: round needle output voltage 0.18 mV internal impedance 2 ohms needle pressure range 3.0 to 5.0 g dead weight 30 g
Speaker cable with 2.4 m pair end unprocessed ultra-high purity 7nCu/6NCU hybrid multi-conductor cable achieves excellent cost performance unrivaled. All materials and configurations, such as insulators, coatings, and inclusions, are the same as 7N and 7.8N cables, and it is a product with outstanding content density. You can see the exterior, dullness, threads, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Continuity confirmed
Accessories: none
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
※1 bottle only. The RCA cable uses a 0.6 m 6N-7N hybrid conductor and twin core structure. The cable is thick and powerful in the mid-range, making it a great cable for vintage audio. There is slight dullness on the plug part (Murakoshi Yoichi)
Maintenance information: 2023.7.20 Continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/5/22 sales price 348,000 yen Everything from the motor power supply to the tone arm has been fully maintained! NEW DUST COVER CREATED! A player with a long-arm Ortofon/AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2 kg double 16 pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
※Since the cantilever is large and tilts to the right, it is inexpensive. Needle cover missing. The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments. There is a feeling of use on the exterior, such as dullness and scratches on the body (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output
Accessories: case
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Speaker cable uses 0.9 m pair Y lug end - untreated 7N copper Excellent separation and an overwhelmingly high S/N ratio. The simplicity of the sound, the good localization, the texture of the strings, and the texture of the voice are amazing. There is friction and dirt on the sheath (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book