Power cable kit supervised by Masamitsu Fukuda. This is a set of 2P plug, connector, and 102SSC cable without a ground electrode. The model numbers for plugs and connectors are P-079 and C-079 (Murakoshi Yoichi)
Accessories: plug, connector case and instruction manual
Refined model equipped with LS-R0i high contact reliability rotary switch. In addition to the rotary switch, this line selector has carefully selected high-quality parts for connectors and internal wiring, and has a housing design that prevents external noise and vibration, so it can transmit the original sound as it is. The exterior is generally good (Tomonori Asae)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: none
Main specifications: RCA cable 3ch line selector W250 x H64 x D128 mm 2.4 kg
Power cable 2.8m Oyaide power cable V-XY/V-XX, made exclusively for the VONDITA-X based on the highest-grade plug M1/F1, are used as plugs and connectors. The cable is based on 102 SSC and uses a silk interposition, a drain line with a double helix structure, and an exterior sheath combining different materials, and is committed to thorough damping (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: original box
Maintained! Comes with a remote control! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. As for the exterior, there are noticeable stains and scratches on the top plate, and there are many signs of use such as dullness and scratches over time. Serial MZ02816260168 (Yamato Yuki)
Maintenance information: 2024.6.6 maintained (tray slide motor belt, CD standby motor belt, wire belt fall off replacement, repair, aging 2 days)
Accessories: remote control
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
RCA cable 5.9 m pair This is an early model before the terminator module, which is also a characteristic of the company, was adopted. It's a sound with good sound separation and a good sense of localization. There is a lot of dirt and rubbing on the exterior (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/6/25 sales price 24,800 yen ※Current delivery. Built-in high sound quality digital amplifier with maximum output of 500W. By drastically reducing vibrations transmitted to the digital amplifier, clear deep bass is achieved. The exterior is abrasive, dull, etc., and has a feeling of use. Serial ECMN 00370JP (Tomonori Asae)
Maintenance information: 2024.6.25 sound output confirmed
Accessories: Saran net power cable (general purpose)
Main specifications: playback frequency band 25 Hz to 4 kHz size W397xH484xD432mm weight 31 kg
Maintained in 2018! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. There is a thin line scratch on the top plate. Serial 605072028 (Fujisawa Yukishi)
Maintenance information: 2024.6.24 Operation confirmed
2018.2.28 Maintained (power unit disassembly inspection, solder correction, all switch volume cleaning)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
The price has been reduced! 2024/6/22 sales price 29,800 yen ※6 month warranty. DSD compatible network player. An entry model that omits the USB-DAC and aims to reduce costs. It supports high-quality sound playback from a wide range of sources, such as Wi-Fi and Bluetooth. This model is ideal as an introduction to network audio. There is a feeling of wear on the exterior (Tamai Jun)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: Remote control instruction manual, power cable, connection cable, antenna
Main specifications: Compatible sampling rate PCM32 to 192 kHz DSD 2.8/5.6 MHz SNR 110 dB dynamic range 100 dB (PCM, audible band) W440 x H104 x D329 mm weight 6 kg
Ferrite Core Noise Filters Set of 10 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: length 38 mm diameter 19 mm hole diameter 8 mm (actual measurement)
USB cable 3.0 m A-B type The sound image floats up softly, and freshness and warmth coexist, and it is a cable that clearly emits the sound typical of Scandinavia. The exterior has a feeling of use such as dullness (Hiroki Aso)
Accessories: original box
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is in a state where there are many signs of use, such as dullness and scratches over time. Serial MZ02722110037 (Yamato Yuki)
Maintenance information: 2024.6.13 maintained (tray slide motor belt, CD standby motor belt replacement, bypass C replacement in other servo boards, operation check)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
Ferrite Core Noise Filters Set of 10 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
*Currently sold, this is a limited edition model commemorating the 15th anniversary of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. The exterior is dull and dirty. The bottom has been replaced with felt from rubber feet (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The price has been reduced. 2024/5/20 sales price 30,000 yen A FOSTEX HA21 throat adapter is set on a self-made horn with a size that imitates the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
Since there are no connectable devices, it has not been checked. D-terminal cable The highest-grade D-terminal cable using a 1.5m silver-coated OFC conductor is ideal for transmitting high image quality images for progressive, high-definition devices, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
Compatible with Mitsubishi 3D-44M This is a replacement needle compatible with MAG-44. Unopened. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-72D, TRIO N-64, Mitsubishi 3D-54M AKAI RS-77, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
※Shipping service. No. 71 Special Feature = New Wave Speakers Building a New Generation of Quality Audio/Answering the Audio Conundrum You Want to Know the Most Right Now (top) /'84 Best Buy Component by Readers' Vote/ Introducing a Tubular EQ Amplifier from Altphone /Published on 1984.7.15. Published models: JADIS/JP80, JA30, JA200 MARANTZ/CD84 PIONEER/P-D90 YAMAHA/CD2 REVOX/B225 DENNSEN/JC80 ACOUSTAT/TNT120, TNP FOSTEX/GZ2001 BEVERIDGE/SYSTEM 5 INFINITY/RS2A LUXMAN/MB300 PIONEER/A150D AR/AR TURNTABLE SPEX/SDX3000, SDT3000 MICRO/MT500, MT1000L/H AKG/P100 LIMITED The photo is a sample, so the actual item may be broken, have marks, etc.
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g