Choke transformer inductance 10H/120mA W75 x H91 x 69 mm 1.5 kg (actual measurement, terminal part not included) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
Choke transformer inductance 10H/120mA W75 x H91 x 69 mm 1.5 kg (actual measurement, terminal part not included) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
Power transformer primary: 90-100-110V secondary: 6.3V-CT/3A 6.3V/3A 5V/2A x 2 12.6V/1A 50V/20mA 385-290-0-290-385V/320mA W122 × H105 × D102 mm 6 kg (actual measurement, not including protrusions) There are fine line damage and paint fading (Kojima Yosuke)
Accessories: none
Power transformer primary: 100-117V secondary: 12.6V/1A, 6.3V/2A x 2, 40V/50mA, -10-0-10-130-150V/DC180mA ((VOLTAGE DOUBLER) /AC0.6A (CONTINUOUS)) W100 x H75 x D85 mm approx. 3.4 kg (actual measurement, not including protrusions) There is a lot of floating on the cover rust part (Kojima Yosuke)
Accessories: none
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
LUXMAN discrete premium line selector. You can select sources for up to 4 models. High-rigidity aluminum material is used for the housing, and 6N (99.99997% copper) wire with little information loss is used as the wiring material. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: none
Main specifications: 6N copper wire, gold-plated internal wiring, 4 systems can be switched, W370 x H71 x D136 mm, 2.4 kg
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. Serial 0903-2G2 (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/6/4 sales price 29,800 yen ※The power supply has been converted to Megane Inlet. Maintained! Head amplifier for Luxman MC cartridges. This head amplifier has no corners and is characterized by a smooth, sit-down sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (GAIN switch disassembly contact polishing, contact grease application after eyelet correction. Transistor replacement for each circuit (DC amplifier, MUTING, power supply). (Running test)
Accessories: power cable
Main specifications: MC type cartridge head amplifier with PASS input impedance/100Ω 20dB/30dB switching W138 x H78 x D305 mm 2.7 kg
The price has been reduced. 2024/6/28 sales price 398,000 yen 2023 manufacturer maintenance completed. A D/A converter developed with sound quality as the top priority, making use of the D-01 philosophy. It is a thick aluminum chassis, and the interior has luxurious specifications with a completely mono configuration such as the power supply unit and analog circuit. The sticky, dynamic characters that are both thick and instantaneous power have different tastes from current ESOTERIC (Mizusaki Ryo)
Maintenance information: 2023.4.13 Maintained by the manufacturer (display part replaced, operation inspection of each input/output part)
Accessories: instruction manual, power cord
Main specifications: digital input iLINK x 2/XLR x 2/RCA x 2/optical x 1 WORD SYNC is equipped with an OUT mode that outputs a WORD clock and an IN mode that synchronizes with an external WORD clock W445 x H159 x D420 mm 27 kg
Maintained by the manufacturer! The flagship model of the time, which was heavyweight and had a sense of luxury. The rich, bold sound quality and glossy tone go great with vintage systems. The top plate has a double structure of real wood and steel plates, and large insulators with machined brass are used for the legs. The headphone output volume has been cleaned, but there is still a slight gap. There is a slight feeling of use on the exterior, scratches, peeling veneer, etc. (Asaine Tomoho)
Maintenance information: 2024.6.18 Maintained (The RF level of the laser pickup is within the regulations ※ repairs will not be possible if sound skipping etc. occur. Replace 2 loading belts. (Inspection of other parts, operation, sound test)
Accessories: Remote control instruction manual copy
Main specifications: 20-bit new super linear converter digital output/coaxial x 2 systems, optical x 1 system, analog output, RCA x 2 systems, balanced output x 1 system, W471 x H146 x D390 mm 22 kg
The price has been drastically reduced! 2024/6/22 sales price 428,000 yen Maintained by Luxman Service! Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are stain marks and scuffs on the top plate. Serial M50400045 (Fujisawa Yukishi)
Maintenance information: 2024.6.7 manufacturer maintained (replaced due to poor operation of the Rch first stage tube. (Inspection of other parts, general adjustment, operation tests OK)
Accessories: instruction manual, power cord, original box
Main specifications: Circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
The 3-layer structure of the power connector, finished with female rhodium-plated carbon fiber, exudes a sense of luxury not found in this kind of self-acting plug. There is a tear in the coating (Tamura Eiji)
Accessories: none
The power plug has a 3-layer structure finished with rhodium-plated carbon fiber, which exudes a sense of luxury not found in this kind of self-acting plug. There is a tear in the coating (Tamura Eiji)
Accessories: none
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
Power cable 1.8 m LUXMAN reference cable JP series. High-purity oxygen-free copper (OFC) 0.26 mm x 66 bars are used as conductors. A 2-core non-twist structure has been adopted to achieve smooth sound quality (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/9 sales price 11,000 yen balance cable line cable using high-purity oxygen-free copper (OFC) wire for 1.0 m pair core wire and shield wire. It is a neutral sound that brings out the individuality of amplifiers and players (Tomonori Asaine)
Maintenance information: 2024.6.9 continuity confirmed
Accessories: none
A line cable that uses high-purity oxygen-free copper (OFC) wire as a balanced cable with a 1.5m pair of core wires and shielded wires. It's a neutral sound that brings out the individuality of the amplifier or player. The exterior is dull and dirty on the plug and sheath (Kojima Yosuke)
Accessories: none
Fully restored! A kit model of a power amplifier using a 50CA10 3-pole output tube and an OY15 type output transformer, composed of circuits and parts conforming to the MQ60 type, which has been evaluated by LUXMAN. The sound of a vacuum tube has a sense of volume that seems to meet expectations, and it gently envelops you. The sound, which doesn't require scale, is particularly unique, and the slight thickness that spreads from below the mid-range makes you feel comfortable. The exterior is dull, rust, abrasions, etc., and there is a feeling of use (Ryo Mizusaki)
Maintenance information: 2024.6.21 Maintained (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. Load test (8Ω load 1kHz 24.5W+24.5W), input/output waveform confirmation, impedance switching SW/gain VOL disassembly contact refinement, oxidation and vulcanization prevention grease coating. Input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 28 W+28 W, actual measurement), sound output test)
Accessories: copy of instruction manual
Main specifications: 30W+30W 50CA10 push pull W410 x H160 x D205 mm 13.8 kg
※This is a replacement for linear equalizer knobs. Maintained! Lax's transistor pre-main advanced model. Compared to the L-500 series, which has a thick middle range, the treble is clear. It's an astringent sound that can also be imagined from the design. You can see a feeling of use such as appearance, dullness, paint deterioration, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 Maintained (switch disassembly contact cleaner applied. Replace deteriorated transistors in each circuit. Knob shaft extension installation (I/O pin jack polish)
Accessories: copy of instruction manual, power cord
Main specifications: 55W+55W (8Ω) Phono2 system W485 × H165 × D300m 12.5 kg
※It is inexpensive because it is in poor condition, such as rust. Maintained! A vintage Lux Premain model. The 75W yet firm, extruded bass and thick, mild mid-high sound are lackstones themselves. Enjoy playing records with a tasteful sound. The exterior is serial 2503734 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (main amplifier circuit board solder correction. Switch and volume contacts corrected. Panel lamp replacement Output relay replacement. (I/O pin jack polish)
Accessories: No accessories
Main specifications: 75W+75W phono 1 system (MM/MC switching) line 2 tape systems, 2 tape systems, pre/power separable, W453 x H135 x D425 mm 13 kg
The price has been reduced. 2024/6/27 Sales price 198,000 yen Maintained by the manufacturer! Lux mid-level class premain. Equipped with a warm colored VU meter. It has a strong low frequency that exceeds the output, and a soft tone typical of a lux. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Maintenance information: 2024.6.27 Luxman maintained (output relay replacement meter lamp replacement power unit/diode replacement board solder correction
Switch volume contact cleaning, internal cleaning, comprehensive adjustment operation confirmation)
Accessories: remote control instruction manual power cable
Main specifications: 100W+100W (8Ω) size W467 x H179 x D440 mm 20 kg
The price has been reduced. 2024/6/18 sales price 138,000 yen manufacturer maintenance completed! Luxman primen amplifier. It is an exquisite unit with a fine mid-range unique to pure Class A amplifiers. Even difficult sources such as string music, female vocals, etc. are played in a glamorous manner. There is a feeling of use due to appearance, dullness, paint deterioration, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Maintenance completed (phono changeover switch/cartridge switch disassembly and cleaning, cleaning of other contacts, solder correction and readjustment, contact cleaning because the turnover switch is out of stock ※ there is some noise at present)
Accessories: copy of instruction manual
Main Specifications: 50W+50W (8Ω) Class A Operation DuoBeta Circuit S Pre-heating Function Line Phase Sensor Mount Frequency Characteristics 10 to 100 kHz Dimensions W453 x H174 x D460 mm Weight 21.4 kg
Currently sold. An affordable theater speaker with a round finish. A tall boy with 4 ways that are more luxurious than the price. It is a cost-effective speaker that can be easily used for TVs and subs. In addition to the exterior and damage to the dowels on the saran net, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net, instruction manual
Main specifications: 3-way 4-speaker bass reflex type maximum input 120W rated input 60W playback frequency band 36Hz to 25kHz 8Ω output sound pressure level 85dB W225 x H900 x D313 mm 15.6 kg
*Currently sold. A Luxman vacuum tube hybrid premain amplifier sold from the Mook book series of Ongakunotomosha Stereo magazine. A hybrid configuration with a 12AU7 vacuum tube in the front part and an A/B grade analog amplifier in the power section. You can easily enjoy the vacuum tube sound. The exterior is about dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W180 × H80 × D90 mm 0.7 kg (actual measurement)
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S is on the front part, the volume has been increased in size from the previous model, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W192 × H107 × D98 mm 1.0 kg (actual measurement)
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 79,800 yen A dedicated arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
Fully maintained! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. The exterior has dullness, small scratches, and paint peeling. Serial 473753 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 30W/30W) input/output waveform confirmation sound output check performed impedance switching SW gain VOL disassembly contact refinement oxidation and sulfidation prevention grease coating input/output waveform confirmation load test (1 kHz) (Sine wave at 8Ω load: 30W+30W) sound output test)
Accessories: copy of instruction manual
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
*iPower ELITE, optical fiber cable (15.0m) included This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE optical fiber cable (15.0 m) power cord (general purpose)
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
※Comes with iPower ELITE This is a bidirectional fiber-optic (SFP) to LAN converter. The OpticalModule Deluxe V2 has an optical fiber (SFP) port and a LAN (RJ45) port. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: iPower ELITE power cord
Main specifications: LAN port 1000/100/10Mbps compatible RJ45 connector optical fiber port SFP port 1000BASE-SX (when using the included SFP module) power supply voltage DC5V to 9V size (without protrusions) 110mmx30mmx112mm weight 250g
The 1.5m PSE standard power cable is sharp, but the increase in S/N speed is not deliberate and I like it. When I held it, it was heavy and had a sense of luxury. There was rubbing and dirt around the plug (Kojima Yosuke)
Accessories: none
DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Exterior, the saran net is extremely hard to attach and detach, so there are cracks in the dowel hole in one place, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.26 Operation confirmed
Accessories: instruction manual, saran net, jumper, spike, spike holder
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)