Based on the AT33PTG, this MC cartridge aims to reduce weight and pursue sound quality. Hard resin based on aluminum alloy suppresses resonance and reproduces clear sound. There are no bends. (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.4 mV suitable needle pressure 1.8 to 2.2 g (2.0 g standard) frequency band 15 to 50 kHz 10 Ω dead weight 6.9 g
Acoliba power strip. Uses PSE standard unplated audio grade outlets and audio grade rhodium plated inlets. Sound turbidity is eliminated, and good granularity and a sense of strength can be obtained (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: aluminum alloy housing, 4 openings, W129 x D150 x H35 mm
A thick, highly rigid heavyweight shell prepared by Orthophone for cartridges other than the SPU series. It is an easy-to-use headshell with a flat cartridge ground surface and excellent adhesion (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
Hi-Fi is in stock for the first time! Beautiful item with original box. An all-weather 2-way compact speaker. It has a polypropylene graphite filled cone woofer and an aluminum tweeter with an acoustic lens wave guide, perfect for outdoor locations with weather protection. Serial IA0111-KM0001510 IA0111-KM0001511 (Asaine Tomoho)
Maintenance information: 2024.6.25 sound output confirmed (good sweep test)
Accessories: original box, English instruction manual, mounting brackets
Main specifications: output sound pressure level 86 dB frequency characteristics 75 Hz to 25 kHz crossover frequency 2.5 kHz size W 182 x 245 x 162 mm weight 5 kg
A higher-level analog player system model in the Pioneer DJ series. While following the interface of the SL-1200, operability has been improved. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: instruction manual power cable
Main specifications: quartz servo direct drive aluminum die-cast platter diameter 332 mm 33/45/2 speed universal type S shaped tone arm static balance type W453 x H159 x D353 mm 14.6 kg
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: Die-cast aluminum, dead weight 10.2 g
Fostex horn-shaped super tweeter. It has a built-in network circuit with an attenuator and is easy to use. The super tweeter unit uses an Alnico magnet machined from aluminum alloy to reproduce clear horn-like sounds. A feeling of use such as scratches and abrasions can be seen on the exterior and upper front corner (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: none
Main specifications: impedance 8 ohms playback frequency band 7 kHz to 35 kHz output sound pressure level 102 dB built-in network 6 dB with continuously variable ATT W146 x H107 x D159 mm 1.7 kg
※6 month warranty It is a full range that combines straightforward mid-high frequencies with sufficient low frequency characteristics, and has high cost performance with rich musicality. I'd like to try setting it to Swan. There are stains on the exterior and the magnet, but they are generally good (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: instruction manual, original box
Main specifications: 10cm caliber full range unit frame type (number of holes): high-rigidity die-cast aluminum frame (8 holes), diaphragm, etc. (material): cellulose nanofiber coating HP shape diaphragm 1.83 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. There is paint removal on the screw hole (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Lead wires are missing. A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
This is a TAOC 4-tier rack. A beautiful form is achieved by adopting a die-cast aluminum frame and aluminum struts. Cast iron insulators arranged at each point absorb vibrations efficiently. There are small scratches scattered on the frame, line damage on the shelf board, and a feeling of use (Murakoshi Yoichi)
Accessories: spikes
Main specifications: shelf board W500 x D450 mm shelf spacing 180/180/280 mm load capacity 100 kg per tier W595 x H825 x D530 mm approx. 34.0 kg
It is a headshell that is standard mounted on the IT-345CR1 and IT-407CR1, which are the company's tone arms, and the geometry settings assume that a 9-MUSA series cartridge is attached, and the finish is the same chrome plated finish as the arm. Of course, cartridges made by other companies can also be installed. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Continuity confirmed
Accessories: none
Main Specifications: Dead Weight: 17.2 g Body Material: Machined Hard Aluminum Exterior Finish: Chrome Plated Finish Connector Side Terminal: Rhodium Plated
Lead wires are missing. SAEC headshell Lightweight, non-resonant head shell made of aluminum light alloy composite. It's light, easy to use, and has an appealing sound that sounds straightforward. On the exterior, there is a scratch on the screw mounting part (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Main specifications: aluminum alloy with a dead weight of about 8 g
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S is on the front part, the volume has been increased in size from the previous model, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W192 × H107 × D98 mm 1.0 kg (actual measurement)
Maintained! Mid-range driver unit with YL acoustics. It's an energetic and clear sound typical of YL. The exterior has small scratches, dullness, and corrosion on the metal parts
Maintenance information: 2024.6.23 Maintained (improved internal terminal contact: improved contact between aluminum coil and terminal. Strain adjustment: complete maintenance of diaphragms, coils, and noise suppression)
Accessories: original box
Main specifications: Playback frequency band 200-7000 Hz maximum input 30W 8Ω output sound pressure level 102 dB diameter 110 x D120 mm 3.30 kg
Maintained. A horn-shaped tweeter developed for the D Series high range using plastic edges. 8Ω specification, compatible horn is CO-800. In addition to being sharp, it is characterized by a precise and delicate sound. Overall, there are dullness, small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.23 Maintained (distortion, vibration repair: magnetic circuit slit corrosion prevention, various parts stop noise, complete maintenance)
Accessories: none
Main specifications: Mid-high range driver, hard duralumin dome, plastic edge, frequency characteristics, 800 to 20,000 Hz, 102 dB, diameter 108 mm x D110 mm, 3.7 kg/bottle
LINN high performance MM cartridge ADIKT The cantilever is aluminum. It has good cutting and strength, and it plays jazz comfortably. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: needle cover
Main specifications: mm type needle pressure 1.5 g to 2 g (1.75 g recommended) impedance 47 kΩ dead weight 7.0 g
Valuable brand new and unused item! I opened it for photography and confirmation of operation. A popular model of Japanese record players. The chassis is tightly solidified into a heavyweight platter and a high-torque direct drive motor that rotates accurately and incomparably. It is a model that can be said to be the crystallization of Japanese craftsmanship, which has been thoroughly built using the direct attack method and enhanced physical characteristics. The heavy, thick sound that cannot be enjoyed with current direct drive players is attractive. The cover interferes slightly with the quartz lock indicator when the dust cover is opened and closed, but the current situation is. On the outside, there is mold floating on the platter. Serial E018872ZP (Fujisawa Yukishi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: instruction manual, original box, head shell, handle, complete set of tools
Main specifications: Statically balanced S-shaped arm mounted applicable cartridge 3G to 12g direct drive drive quartz PLL servo control DC coreless hole motor turntable 36 cm aluminum die cast W545 x H230 x D417 mm 28 kg
Ethos (Ethos), limited to 500 pieces worldwide, is now in stock! SPU Ethos was born as the culmination of an unchanging spirit that has been passed down for over 60 years, refined with the latest technology. The classic SPU sound shines even more, captivating analog fans. The exterior is generally good. Serial 037430 (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: original box, instruction manual, needle cover
Main specifications: Output voltage (1 kHz 5 cm/sec): 0.3 mV channel balance (1 kHz) 1.0 dB channel separation (1 kHz) 20 dB channel separation (15 kHz) 10 dB frequency characteristics (20 Hz-25,000 Hz) ± 2 dB tracking ability (315 Hz, 70 μm under proper needle pressure Horizontal compliance: 8 μm/Mn stylus type Nude Elliptical Stylus Tip Radius: r/R 8/18μm Cantilever Material Aluminum Suitable Needle Pressure: 4.0g Needle Pressure Range: 3.0-5.0 g Tracking Angle 20° Internal Impedance 3.5Ω Recommended Load Impedance 10Ω or More Coil Wire 8N High Purity Copper Cartridge Shell Wood Powder and Resin Composite Material Dead Weight 32g
An Ikeda headshell with a beautiful polished surface finish. Machined aluminum alloy body with excellent rigidity. By making the terminal part made of titanium, it also has excellent vibration, resonance, and resonance (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: original box
Main specifications: main body, aluminum terminals, titanium weight: 20g
This headshell is designed to match the Orthophone MC-Q series cartridges. It is an easy-to-use headshell with a slightly heavy weight that is easy to combine with cartridges from other manufacturers. There is a screw scratch (Tomoho Asaine)
Maintenance information: 2024.6.23 sound output confirmed
Accessories: original box
Main specifications: machined aluminum body weight 15g
The price has been drastically reduced. 2024/6/22 sales price 148,000 yen Maintained by Taiyo International! JEFF ROWLAND's compact power amplifier, MODEL 102, has arrived. Although it is small, the driving power is high enough with a 100W output. In combination with CAPRI, it shows maximum tonal appeal, and it is a powerful machine that is compatible with various pri even when used alone. Part 1 of the characters have disappeared on the exterior, and there are small scratches and bumps (Sasaki Shota)
Maintenance information: 2024.4.10 Maintained by the manufacturer (replaced due to lack of capacity of the electrolytic capacitor. (Left and right level and other characteristic tests and running tests are carried out)
Accessories: copy of manual, power cable
Main specifications: 100W+100W (8Ω) frequency characteristics 54-65kHz damping factor 1000 twin mono configuration machined aluminum block W348 x H68.5 x D190 mm 3.4 kg
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Fujisawa Yukishi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: No accessories
Main specifications: aluminum 15g
The disposal price has been reduced. Member discounts are not applicable. 2024/6/19 sales price 278,000 yen The motor is undergoing maintenance in 2021. An ingenious floating system cabinet with a direct drive turntable SP-10 mounted on a large floating wood base. The arm is set up with an SME3012, and its sharp, well-sharpened followability is attractive. The cabinet is compatible with double arms. There are some cracks in the exterior and dust cover, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2021.3.6 maintenance (rotation reference diode, electrolytic capacitor, 33/45 changeover switch replacement, strobe mirror cleaning, rotation center adjustment, spindle lubrication)
Accessories: none
Main specifications: Turntable: 30 cm die-cast aluminum alloy, 2.8 kg, direct drive speed 33 1/3, 45 rpm wow flutter 0.03% or less, arm: static balance type needle pressure 0 to 5 g cartridge weight 1.5 to 26 g W627 x H200 x D512 mm 18.5 kg
Digital cable 2.0m BNC terminal double shielded with aluminum wrap and mesh Teflon developed by DuPont in the United States is used as the insulator, and it is a flat balanced cable with excellent sound separation. The exterior is dull and has a feeling of use (Hiroki Aso)
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/6/15 sales price 478,000 yen Maintained by the manufacturer! Current model of the project's belt drive player. Equipped with Ortphone's popular dynamic balance arm RS-309D. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. The exterior has bumps and burrs that look like bumps on the corners. A protective sheet is attached to the dust cover, but it remains as is (Fujisawa Yukishi)
Maintenance information: 2024.6.15 manufacturer maintained (belt replaced. (Platter bearing grease application, inspection of each part, operation check)
Accessories: instruction manual, stabilizer, power cord, head shell, template, needle pressure gauge, dust cover, EP adapter, gloves
Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg
The price has been reduced! 2024/6/14 sales price 26,800 yen The stand is made of magnesium alloy, and the top plate and bottom plate have a structure made of aluminum and steel plywood. Ultrafine sand is encapsulated inside the pillar and thorough anti-vibration treatment has been applied (Asae Tomo Law)
Accessories: none
Main specifications: top plate W160 x D210 mm bottom plate W220 x D270 mm height 700 mm weight 8.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center of the cone center of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/6/8 sales price 89,800 yen You can enjoy the voluminous bass with highly efficient and heavy corn paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are small scratches etc. on the exterior. Serial 7413 10417 (Tomonori Asaine)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
The price has been drastically reduced. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Good condition with original box! OTG cable compatible with portable devices equipped with Lightning terminals. Can be used with products equipped with USB Type-C. By using a mesh sheath that is resistant to compression and twisting, and aluminum alloy is used for the plug, faster and more stable transmission is achieved. (FUJISAWA KOSHI)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: original box
Main specifications: Lightning-USB TypeC total length 138mm cable length 80mm (excluding plug)
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
2-row 6-piece outlet plate made of corrosion-resistant aluminum alloy+fully coated new metal There is a feeling of use such as small scratches (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 x H116 x D6.5 mm weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
Outlet plate for 2 rows of 6 using corrosion-resistant aluminum alloy+new metal with full coat processing (Hidetsugu Kanai)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm Weight 38 g
2-row 6-piece outlet plate with corrosion-resistant aluminum alloy+full coated new metal. There is no problem with the appearance (Kanai Hidetsugu)
Accessories: none
Main specifications: W120 × H116 × D6.5 mm