The price has been drastically reduced! 2024/5/8 sales price 30,000 yen ※The exterior is in poor condition, so it's cheap. This is Altec's classic 1 inch 4-sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The price has been reduced! 2024/5/8 sales price 12,000 yen ※The exterior is in poor condition, so it's cheap. 1 bottle only Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
Both inside and outside have been fully maintained! An improved Georgian model that inherited the policy of the higher model “Patrician 2.” Unlike the heavy exterior, such as a crossover point setting that makes the power response uniform, and a CD horn that provides a large listening area with high frequencies, etc., it is extremely straightforward and well-balanced, so you can enjoy a sufficiently attractive sound even today. ※Saran net is out of stock. The exterior has been beautifully finished with maintenance. There are wrinkles on the center cap of the MID on one side. Serial S1-3 1996/S1-31984 (Yonejima Satoshi)
Maintenance information: 2024.6.20 Maintained (exterior repair/polishing/clear finish. Rear baffle/hakama repair/painting. Woofer mid-edge replacement. (Detachable unit)
Accessories: No accessories
Main Specifications: Efficiency: 95dB Impedance: 6Ω W642 × H119.3 × D450 mm 63.0 kg
Both inside and outside have been maintained! A floor-type speaker with a round baffle and vertical twin, and thorough attention to materials. The sense of density and high response sound that firmly inherits the TAD philosophy is attractive. The dynamic and speedy high range with the TD2001 driver and horn using Japanese maple wood is attractive. The exterior has bumps and small scratches on the sides. Serial 00206 00210 (Yonejima Satoshi)
Maintenance information: 2024.6.20 Maintained (exterior cleaning/touch repair, woofer maintenance: correction of resonance locations such as 2 floating edges, unit detachment)
Accessories: saran net
Main specifications: 2 way 3 speaker bass reflex floor type woofer 25 cm cone type x 2 horn type tweeter x 1 (beryllium diaphragm used) Alnico crossover frequency 1.2 kHz impedance 6 Ω maximum input 300 W 93 db W370 x H1 210 x D586 mm 85.0 kg
The price has been reduced! 2024/5/13 sales price 59,800 yen ※ It is cheap because chips and oxidation are conspicuous in the horn part. A tweeter representing JBL. It gives an expression with a greater sense of depth and expansion than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The price has been drastically reduced. 2024/4/18 sales price 89,800 yen TANGO input transformer, line transformer using NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)