Replacement needle for Toshiba cartridge C-34M It is unchecked for replacement needle only. (Mizushima Itsuro)
Maintenance information: 2021.7.3 unchecked
Accessories: original box
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g
Maintained. Amber cap!! MonitorRed15inch. The appeal of this unit is that they can play not only classical music, which TANNOY excels at, but also jazz sauce. The sound quality is solid when starting up, but it is a wonderful unit that also has an elegant sound typical of Tannoy. Please take this opportunity to buy rare units that are hard to come by! (KOBAYASHI Hitoshi)
Maintenance information: 2024.6.25 maintained (unit maintenance: magnetic circuit gap cleaning center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, 4-pin terminal cleaning)
Accessories: network
Main specifications: Official name: Monitor 15 inch 38 cm coaxial 2 way playback frequency band 23 Hz to 20 kHz input impedance 16 ohms magnet weight 5.9 kg crossover frequency 1 kHz maximum input 50 W total weight approx. 6.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/15 sales price 148,000 yen Maintained by TEAC! VRDS-25 rigid menism final model. This is a popular model used by JAZZ/ROCK fans with a strong housing and a highly accurate VRDS mechanism, and has high resolution and clear contours. Spikes are attached to the solid 8 mm thick bottom plate, and the excellent construction with an excellent sense of reliability is also attractive. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.4.26 Maintained (All parts have been inspected. We have confirmed wear on the tray belt, clamp belt, and turntable bearings. Tray belt, clamp belt, and turntable bearing replacement. (Check operation by cleaning and lubricating the pickup and mechanical parts)
Accessories: Remote control instruction manual copy
Main specifications: multi-bit DAC, 25 bits, 8 times oversampling digital filter, W442 x H145 x D344 mm, weight 23 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/19 sales price 278,000 yen The motor is undergoing maintenance in 2021. An ingenious floating system cabinet with a direct drive turntable SP-10 mounted on a large floating wood base. The arm is set up with an SME3012, and its sharp, well-sharpened followability is attractive. The cabinet is compatible with double arms. There are some cracks in the exterior and dust cover, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2021.3.6 maintenance (rotation reference diode, electrolytic capacitor, 33/45 changeover switch replacement, strobe mirror cleaning, rotation center adjustment, spindle lubrication)
Accessories: none
Main specifications: Turntable: 30 cm die-cast aluminum alloy, 2.8 kg, direct drive speed 33 1/3, 45 rpm wow flutter 0.03% or less, arm: static balance type needle pressure 0 to 5 g cartridge weight 1.5 to 26 g W627 x H200 x D512 mm 18.5 kg
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: Die-cast aluminum, dead weight 10.2 g
The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output)
Accessories: remote control, instruction manual, power cord
Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg
This is a replacement needle for the national cartridge EPC-05STA. Unopened and unchecked (Mizushima Itsuro)
Maintenance information: 2024.3.8 unchecked
Accessories: original box
Power transformer primary: 100V secondary: 7.5-6.3-0-6.3-7.5V/3A (2 circuits) W90 × H121 × D90 mm approx. 3.6 kg (actual measurement, not including protrusions) There is a fine bruise (Kojima (Yosuke)
Accessories: none
The pair tube seems to be made of RFT due to its 6CA7 compatible sphere structure. Measured value 42/40 (rejected value 30) lettering with replacement box is missing ※The pair is determined based on the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The pair tube seems to be made of RFT due to its 6CA7 compatible sphere structure. Measured value 44/44 (rejected value 30) lettering with replacement box is missing ※The pair is determined based on the gM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
It is a component magnetizer that demagnetizes everything from the input to the output of your amplifier. It emits a 1 kHz wave tone and demagnetizes. The sound quality of the entire system can be expected to be improved with easy operation. Good enough that you don't feel a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.22 operation confirmed
Accessories: original box, instruction manual (English, Japanese)
The price has been reduced. 2024/6/2 sales price 59,800 yen Triode line vacuum tube premain developed with the novel concept of an amplifier for women. With its compact, exquisite size and high design, it can be used in a variety of situations. The exterior is good with only a small scratch and there is little feeling of use. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cable
Main specifications: output 3W+3W (8Ω) vacuum tubes 6BQ5 x 2, 12ax7 x 2, dimensions W190 x D180 x H135 mm weight 4.7 kg
Maintained! A power amplifier using the AB/LR independent power supply system, which is a further development of the A class B class 2 independent power supply system. Contrary to its solid appearance, it has a beautiful sound with a sense of transparency. The sound quality is moderately tight and firm, and it naturally handles crisp and energetic intonation expressions. The exterior has small scratches and dullness appropriate for the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.12 Maintained (replacement of defective output relay contacts. (Replace deteriorated capacitors in power supply circuits and other circuits)
Accessories: none
Main specifications: 100W+100W (8Ω) compatible speakers 4Ω to 16Ω SNR 110dB W420 x H166.5 x D300 mm 19.2 kg
The digital cable 1.0m BNC terminal STV6 silver clad OCC high-purity copper conductor has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle (Fujisawa Yukishi)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
Digital cable, 1.0m, XLR terminal, silver-clad OCC high-purity copper conductor, has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
The digital cable 1.0m BNC terminal STV6 silver clad OCC high-purity copper conductor has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle (Fujisawa Yukishi)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
Digital cable, 1.0m, XLR terminal, silver-clad OCC high-purity copper conductor, has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
Digital cable 1.0m RCA terminal, silver clad OCC high-purity copper conductor, has a parallel arrangement structure that neutralizes and makes the flow of electricity accurate, enabling more accurate transmission. It's clear, has no habits, and is easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: original box
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
Maintained in 2023/7! A control amplifier that inherits the sound of Yamaha's famous C2a. A highly reliable phono equalizer is used, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. In addition to dullness and small scratches on the exterior, there are scratches on the front sub-panel and insulator marks on the top plate. Serial E052015SU (Hiroki Aso)
Maintenance information: 2023.7.13 Maintained (PHONO circuit IC/capacitor replacement, main board, soldering, deterioration, all correction, volume type, contact correction, long time sound output check)
Accessories: copy of instruction manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm