Comes with Grace HS-3 GE Valirella mono cartridges for LP/SP. The SP/LP stylus is inserted into a T-shaped holder and is a flip-over type that can be used by switching with the knob on the back. You can enjoy the thick, powerful, and exhilarating sound. There is dullness on the body that has deteriorated over time ※finger straps are out of stock (Oikawa Tetsuji)
Maintenance information: 2024.7.3 operation confirmed
Accessories: none
Main specifications: dead weight 20.6 g (actual measurement, including shell)
The Marantz network player is easy to use because it is compatible with network audio, streaming, AirPlay2, Bluetooth, and USB memory. PCM supports playback up to 192 kHz/24 bit and DSD up to 5.6 MHz. The DAC is equipped with an ES9016K2M compatible with high resolution sound source specifications similar to the ND8006 (Daiki Goto)
Maintenance information: 2024.7.3 operation confirmed
Accessories: remote control, instruction manual, power cable, connection cable, original box, antenna
Main specifications: DSD 2.8/5.6 MHz compatible PCM 192 kHz/24 bit Playback frequency range 2 Hz to 100 kHz W440 x H106 x D371 mm (without antenna) 6.6 kg
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Upholstered sound control panel with unknown details. The size is easy to use. There is a feeling of use such as stains (Daiki Goto)
Accessories: none
Main specifications: W650 x H120 x D650 mm, weight 400 g (actual measurement)
Maintained by the manufacturer! AZ of the company's long-selling 1650 series. It is a model that gained popularity due to its bright and thick tone. It's easy to listen to in any genre, and the thickness of the mid to low range typical of DENON is attractive. There are striped marks on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.7.3 manufacturer maintained (headphone VR disassembly cleaning. Loading belt, tray opening/closing SW replacement. Top cover cleaning)
Accessories: power cable, copy of instruction manual ※ remote control missing
Main specifications: W434 x H135 x D340 mm 12.4 kg
Maintained! A pure Class A premain amplifier from the early days of the musical Fidelity. The top plate heats up due to the high calorific value, but it is a famous machine that still boasts high popularity for its elastic, bouncy mid-low range, and smooth, thick mid-high range sounds. The beauty of the simple design is also attractive. There are small scratches and scratch marks on the exterior. Serial 11418 (Tamura Eiji)
Maintenance Information: 2024.7.3 Maintained (input selector switch contact cleaning. The TAPR and MM/MC changeover push switches were replaced due to poor contact. 17 capacitors were replaced due to differences in electrolyte condenser fluid leak levels. (Each input/output operation check is OK)
Accessories: instruction manual
Main specifications: pure A grade 20W+20W (8Ω) W408 x H60 x D249 mm 5.5 kg
Audio switching hub. It is an audio switching hub that can be used between network players and NAS. Simply plug in the power cable and you can use it right away. There is no need for troublesome settings. There are small scratches on the exterior. Serial 016100 (Tamura Eiji)
Maintenance information: 2024.7.3 operation confirmed (originally the access lamp does not light up)
Accessories: none
Main specifications: W230 x H55 x D190 mm weight 1.4 kg
An omnidirectional speaker that also doubles as an interior. Perfect for BGM in the living room, office, or store. The unique spatial expression unique to sound field type and omnidirectional nature is attractive. ※One wedge to fix the stand is missing, but there is no problem with freestanding. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 operation confirmed
Accessories: stand
Main specifications: minimum resonance frequency 80 Hz playback frequency band FO to 22 kHz 8 ohms diameter 200 x 400 mm weight 3.0 kg
Comes with original box. JICO respects the popular MM cartridge M44G, which has been discontinued by SHURE, and has released cartridges that can use genuine replacement needles of the existing SHURE 44 model and JICO replacement needles as they are. If you love the M44G, don't miss it! (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: mm type output voltage 5.0 mV to 8.0 mV playback frequency 20 Hz to 20 kHz needle pressure 1.5 to 3.0 g dead weight 5.6 g
It is an isolator that can be used with any PC or network audio device that has a USB output. Improved signal-to-noise ratio and increased resolution have the effect of further improving the amount of information. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 operation confirmed
Accessories: No accessories
Main Specifications: W130xD65xH25mm Weight 170g Aluminum Case Host Side: USB-B Device Side: USB-A
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel significant changes due to power cables, and it is a high cost power cable. ※The wire material is hard, and this cable is slightly difficult to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: No accessories
Due to the unprocessed twist specification at the 3.9 m pair end of the speaker cable, it is less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: No accessories
A dedicated player for Rotel's high-end CDs. Equipped with the Wolfoson WM8740 DAC chip with 192 kHz/24 bit resolution, you can enjoy clear, natural, and high-resolution sounds. *Remote control is not included. The exterior is good with no noticeable scratches. Serial 751-0461033 (Yonejima Satoshi)
Maintenance information: 2024.7.3 operation confirmed
Accessories: power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive, high-quality sound quality is compatible with a wide variety of genres. The exterior is dull on the top plate. *Remote control is not included. Serial 867-9451051 (Yonejima Satoshi)
Maintenance information: 2024.7.3 operation confirmed.
Accessories: power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
This is the first Nordst product to use patented micro monofilament technology for a 0.7 m pair of RCA cables. It is an inexpensive cable with good cost performance. ※The rubber on the single-channel terminal is out of stock (Tamura Eiji)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: none
Set of 4 Y-rugs Terminal kit for universal speaker cables with variable tips. It has an excellent structure that makes it possible to reliably contact extra heavy core cables up to 5.5 scares in diameter with a single hex wrench (Fujisawa Yukishi)
Accessories: hex wrench
Main specifications: high purity 24K plated cable insert size, inner diameter 3.8 mm to 5.8 mm, conductor (core wire) insertion part is 3.8 mm, Y lug tip size, maximum inner diameter 8.0 mm, minimum 6.0 mm/outer diameter 14.0 mm
※1 lock screw is tight and does not move, so it is inexpensive. There are no connection issues. Saek's banana plug set of 4 is an authentic model that can increase the connection pressure with the terminal with a screw-type lock mechanism. (FUJISAWA KOSHI)
Accessories: No accessories
SB series trapezoidal speaker stand. Unnecessary vibrations are reduced, and the speaker's original capabilities are demonstrated. It's the perfect size for a bookshelf speaker. A part of the board can be seen turning over. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: H550mm top plate W178 x D245 mm bottom surface W290 x D340 mm approx. 5.0 kg
Comes with a pedestal. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There is an entry in the manual (Tamura Eiji)
Maintenance information: 2024.7.3 oscillator check OK
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The 1.5m power cable is made of Acrolink's unique ultra-high purity DUCC 7N Cu, and 50 0.37φwires with stress-free processing are twisted to avoid mutual interference and noise. Try it out with a classical symphony. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Material, set of 4 spikes with unknown details. It is very similar to the J1 Project cone spike and has the same screw diameter. How about amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch 8 mm diameter 40 mm height 26 mm 23.7 g
1 pair of noise stoppers for XLR (balanced) output terminals It not only prevents wideband noise from entering through unused XLR male terminals, but also enhances the damping effect. Non-magnetic nickel is used as the material (Kobayashi Hitoshi)
Accessories: none
PSE certified product. Matsushita's classic power plug opened up the world of audio power plugs. It is a hospital grade long-time seller that can be used by beginners to advanced users. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none