Exterior maintenance and woofer mid-edge softening treatment have been completed! It lets you hear the tight low frequencies created from the sturdy enclosure and the pleasant, clear mid-high range, and voluminous sound. As expected, the intensity of density from low to high frequencies is a diamond tone. Not to mention jazz, it also plays classical music exhilarating. Serial 12362/12369 (Takasaki Atsushi)
Maintenance information: 2024.7.5 maintained (exterior maintenance: non-front repair/polishing/clear finish, rear baffle touch repair, saran net replacement, woofer mid-edge softening treatment, unit detachment)
Accessories: saran net
Main specifications: 4 way 4 speakers sealed 6Ω 90dB MID+ tweeter/bolon DUD diaphragm woofer/aramid honeycomb diaphragm W450 x H750 x D420 mm 52 kg
※The finger clip is out of stock, so it's cheap. SPU-AE special specification model. The solid sound of the A shell+elliptical needle is excellent. Silver wire is used for the power generation coil, and the range is wider and the resolution has also been improved. The exterior is dull and has a feeling of use. Serial A1444 (Murakoshi Yoichi)
Maintenance information: 2024.6.29 sound output confirmed
Accessories: none
Main specifications: elliptical needle output voltage 0.2 mV needle pressure 3.0 to 4.5 g playback frequency band 20 to 20,000 Hz internal impedance 3 ohms weight 32 g
Full maintenance from the driver to the woofer, from the network to all exterior repairs and paint! The outstanding vocal band and the sense of energy of the resonating horn are amazing. The 500 Hz network makes well-balanced sounds at home (Murakoshi Yoichi)
Maintenance information: 2024.7.4 maintenance (exterior repair/full painting, horn painting. Saran net cleaning/repasting. Woofer maintenance (viscoid/center adjustment, cone paper coating, terminal cleaning) Driver maintenance: magnetic circuit gap cleaning/center adjustment, terminal cleaning) network maintenance (frequency characteristic check, ATT/terminal cleaning) unit detachment, horn stay installation processing, new wiring
Accessories: none
Main specifications: enclosure 828G woofer 416-8B driver 802-8D network N-501-8A horn 511B W760 x H1375 x D610 mm weight approx. 73.9 kg
※Inexpensive because there are scratches on the top plate and edge on one side. This is the newest bookshelf in the Focal Tiba series, which will be introduced for the first time in Hi-Fi. Clear and well-balanced sound is achieved with the company's proprietary TNF tweeter and slateFiber diaphragm driver (Murakoshi Yoichi)
Maintenance information: 2024.7.4 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 2 way 8Ω 89dB W212 x H392 x D260 mm 7 kg
Maintained by the manufacturer! 2-way dedicated multi-channel divider for FB-12500 loading. 2-way exclusive design with balanced input/output circuits. You can build a clear and fresh multi-system. The exterior has a feeling of use such as dullness. Serial D8Y210 (Tomonori Asaine)
Maintenance information: 2024.7.5 maintained (level volume cleaning, good characteristics and operation checks)
Accessories: power cable FB-12500 board
Main specifications: crossover 12.5 kHz W475 x H150 x D395 mm weight 10 kg
The 1.3 m end of the speaker cable is an untreated 5N high purity conductor, tinned x 756, and has a mild, high-quality sound quality without getting tired of listening, and the high-quality texture is attractive. There is a feeling of use on the exterior, such as dirt and dullness on the sheath part (Asaine Tomoho)
Maintenance information: 2024.7.5 continuity confirmed
Accessories: none
Speaker cable 1.7 m pair terminals pass an insulator and magnetic flux tube through the center of the untreated conductor to prevent the effects of signals due to disturbances in the magnetic field. Neutral characters and can be used in a wide range of ways (Tomonori Asae)
Maintenance information: 2024.7.5 continuity confirmed
Accessories: none
The 2.9 m pair end of the speaker cable has an unprocessed basic OFC copper parallel line center of gravity, and the sound is quite calm. The exterior has a feeling of use such as dullness (Tomoho Asaine)
A simple DA converter incorporating a Barbrown chip. The design is simple, but the sound is very thick, and the sound is full of strong wild character. There are few models where the sound changes so much with just one converter. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2022.7.2 maintained (replaced due to faulty RCA jack for coaxial input, inspection of each operation)
2021.7.29 Maintained (21 capacitors replaced)
Accessories: power cord, repair statement
Main specifications: Barbrown 20-bit DAC equipped with 1 input coaxial system/TOS link 1 system/ST link 1 system output coaxial digital system/1 analog RCA1 system sampling frequency 32kHz/44.1kHz/48kHz W430xH63xD280mm 9.5 kg
Overhauled and maintained in January 2023! Middle monitor gray finish specification. The punchy bass and sharp, smooth midrange are white eyebrows. After all, playing records on this speaker is fascinating. There are small scratches and repair marks on the exterior (Sasaki Shota)
Maintenance information: 2023.1.29 Maintained (all exterior painted. exterior repair. plate repair. Create a new Saran Net. All units are coated with corn paper. Woofer maintenance (cleaning the gap on one side, center cap replacement, edge damping agent application. Resonance correction, frame polishing) mid-maintenance (frame painting. 1 rivet misalignment fixed) unit detachable) internal connection terminal (faston) replaced with a new one. ATT replacement with a brand new one. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveforms and balance. (Check the sound output)
Accessories: none
Main specifications: 3 way 3 speaker front bass reflex type sound pressure level 91 dB impedance 8 ohm crossover frequency 1.5 kHz/6 kHz playback frequency band 45 to 15,000 Hz W362 x H597 x D298 mm 20 kg per unit
Tweeter has been maintained! An extremely heavy center speaker with a large unit tightly packed into a compact enclosure. An amplifier with driving power is required, but it reproduces vocals with a sense of temperature. There are abrasions and paint peeling along the corners (Kojima Yosuke)
Maintenance information: 2024.7.5 maintained (complete magnetic circuit disassembly, assembly and repair due to removal of the tweeter from the ATC tweeter repair main body, detachment management costs, tweeter repair, and neodymium magnet rust)
Accessories: jumper plate
Main specifications: 2 way 3 speakers, sealed playback frequency band, 48 Hz to 20 kHz, crossover frequency, 2.5 kHz, output, sound pressure level, 86 dB, impedance, 8 ohms, W600 x H212 x D300 mm, 26.5 kg
Speaker cable, 3.0 m pair, sold off type, 6N conductor, Starcard structure, rare, and rare Pioneer luxury rare cable. It is a cable with a good sense of sound separation and excellent high frequency characteristics. There are abrasions on the sheath and printing parts (Kojima Yosuke)
Accessories: none
Internal and external maintenance has been applied and brushed up! The first model of the JBL standard monitor 4312. The sound directly related to the 4311 series, which is the only 4312 series to use a paper cone tweeter, is attractive. The tense mid-low range is full of dynamism that embodies JBL. The exterior is beautifully finished. Serial 37442/43895 (Tamura Eiji)
Maintenance Information: 2024.7.5 Maintained (enclosure polishing, oil/wax painting. Baffle painting, new saran net created. Woofer mid tweeter cone paper coating. Network maintenance: frequency characteristics check, ATT cleaning. (Detachable unit)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex woofer 2213H/ scoker LE5-12/tweeter LE25-2 8Ω 91 dB W362 x H597 x D302 mm 20 kg
Thorough maintenance was carried out, from the exterior of the wood cabinet to the replacement of capacitors and deteriorated parts! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has also been cleaned up due to cabinet repairs. Serial 101 19828 (Fujisawa Yukishi)
Maintenance information: 2024.7.5 Maintained (replacement of parts that have deteriorated over time, SW/VOL complete disassembly contacts repolished, and grease applied to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1 kHz sine wave, at 8 ohm load: 30W+30W, OK), sound output test. Cabinet exterior repair/polishing/painting)
Accessories: copy of instruction manual, power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
Internal and external maintenance has been applied and brushed up! The L77 is designed right in the middle of the mid-century. The combination of a 25cm woofer and droncone creates a low frequency with plenty of capacity and good response. Enjoy the sounds of the 60s in combination with the LE20 that clicks. The exterior is beautifully finished. The nameplate on the back is missing on one side. Serial unknown/124053 (Tamura Eiji)
Maintenance Information: 2024.7.5 Maintained (enclosure polishing, oil/wax painting. baffle paint. Maintenance: Reupholster the lining, polish the side frame. Woofer passive cone paper coating. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement. (Detachable unit)
Accessories: saran net
Main specifications: 2-way, 2 speakers, passive radiator system, bookshelf type, W360 x H570 x D300 mm
Maintained! ※Tone arm finger mount is missing. It is a product of the British company Roxanne, which has established numerous milestones with turntables. A non-resonant double turntable combining different materials (plastic and aluminum) is used to improve sound quality, and a high-rigidity dedicated stand with three-point support for upper and lower spikes eliminates external vibration and self-vibration at a high level, making it possible to enjoy sound with an even higher signal-to-noise ratio. Externally, there are scuffs on the dust cover. Serial 300567, 44835 (Fujisawa Yukishi)
Maintenance information: 2024.7.5 Maintained (spindle bearing processing fixed. Disassembly grease lubrication adjustment when arm elevation grease has run out. Spindle shaft lubrication. The servo circuit was checked. Board stain cleaning. Power supply unit foot replacement. (Belt replacement)
Accessories: power cord, power supply
Main specifications: belt drive with TABRIZ driving tone arm W450 x H128 x D355 mm 8.5 kg
Maintained by Denon! Denon's mid-tier Primain second-generation model. A sound with firm lines with a sense of stability that further pursues “subtlety” and “strength” from the first generation. It is compatible with various speakers, and the biggest appeal is the sense of energy in the mid to low range, which surpasses the 2000 number in recent years. It is an easy-to-use model that is compatible with both records and MM/MC. There are small scratches on the exterior. Serial 9127307236 (Fujisawa Yukishi)
Maintenance information: 2024.7.5 manufacturer maintained (source direct SW contact cleaning. Other, input selector switch, disassembly contact cleaning. Fixed poor contact between MM/MC switching SW. idling adjustment. Other, inspection)
Accessories: power cord
Main specifications: 80W+80W (8Ω) PHONO (MM/MC switching) LINE 6 system W434 x H180 x D478 mm 22 kg
*Saran net is out of stock. The edge has been softened! A versatile speaker that can be enjoyed regardless of choice, with an excellent diatone range balance. The overall sound quality gives a tight impression, and it plays music with tight low frequencies and clear mid to high frequencies. On the exterior, there are cracks and scratches on the veneer, and small scratches on the woofer cone paper on one side. Also, the blindfold cap for each TW fastening screw is missing one by one. Serial 27412, 27409 (Fujisawa Yukishi)
Maintenance Information: 2024.7.5 Maintained (woofer edge softening treatment)
Accessories: No accessories
Main specifications: 3 way 3 speakers anti-magnetic design impedance 6Ω W400×H700×D330 mm 29.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 69,800 yen ※Currently sold. Audio Alchemy D/D converter, D/A converter, and power supply set. It's a thick sound that shows the vocals' sense of position. The exterior has dullness and scratches (Hiura Katsuji)
Maintenance information: 2023.11.22 sound output confirmed
Accessories: instruction manual, power cord, 2 connection cords
Main specifications: DTI-PRO32: W210 ✕ H53 ✕ D172mm weight 2.0kg (including power supply)
The price has been reduced. 2024/6/24 sales price 45,000 yen An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. There is a warp on the top surface. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
The price has been reduced. 2024/6/24 sales price 45,000 yen An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. A feeling of use can be seen on the exterior, peeling of the veneer, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
The price has been reduced. 2024/6/24 sales price 45,000 yen An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
The price has been reduced. 2024/7/4 sales price 330,000 yen Maintained. Genuine Electri A power amplifier representing the McKinn Golden Age. It has a rich, gorgeous sound with a punch, and is still a popular model. Although it is a transistor amplifier, it is an amplifier that still has a strong tubular atmosphere. The rich, thick characters reproduce the music on a rich scale. The exterior is in a good category even when viewed from the year it was released (Oikawa Tetsuji)
Maintenance information: 2024.7.4 maintained (VOL complete disassembly, contact refinement, oxidation and sulfidation prevention grease application, input/output waveform confirmation, meter adjustment, load test (1 kHz sine wave, at 8 ohm load: 250W+250W, OK)
Accessories: copy of the manual
Main specifications: 250W+250W (stereo 1/2/4/8Ω) 500W (mono 0.5/1/2/4/8/16Ω) input sensitivity (0.75V/2.5V) switchable W411 x H181 x D368 mm 37.2kg
The capacitors, switches, and volumes have been thoroughly maintained! Lux's early transistor pre-main amplifier. The vocals stand out based on a faint warm sound, and you can feel the thickness of the mid-range. It has an appeal not found in current models. The exterior has line damage, dullness, etc. (Oikawa Tetsuji)
Maintenance Information: 2024.7.4 Maintained (main volume, Treble/Bass and balance volume cleaning. Rotary switch contact cleaning for source, stereo mode, etc. Contact cleaning for all toggle switches, such as Att/Normal. The capacitance and ESR values of the electrolytic capacitors in the board were inspected, and 26 deteriorated electrolytic capacitors were replaced. Pre/Main slide switch contact cleaning. Pilot lamp preventive replacement. Clean the front panel and knobs and clean the interior and RCA terminals. Offset, idle adjustment)
Accessories: power cable
Main specifications: 30W+30W (8Ω) W451 × H148 × D268 mm 10.5 kg
*Currently sold. First arrival! A stereo power amplifier using germanium transistors. It sounded right away at the store, but the sound is much softer and more soothing than the sound of silicone. The output is modest, but it's good enough as long as it's not loud. There are 2 non-genuine simple adapter types as power supply units (Sasaki Shota)
Maintenance information: 2024.7.4 sound output operation confirmed
Accessories: Power supply unit x 2
Key Specifications: Germanium stereo power amplifier 3W+3W
Comes with original box. A stand dedicated to the company's Concertino Domus. It's an elegant look typical of Sonas (Oikawa Tetsuji)
Accessories: original box, spikes, screws x 4
Main specifications: W380 x H650 x D320 mm 11.5 kg
※It is OK to re-record with a simple test, but it is currently sold because it is cheap. Pioneer MD player. Equipped with Pioneer's unique digital NR, it is possible to record and play back with low noise sound quality for relatively noisy input sources such as reprinted CDs, cassettes, and broadcast signals from analog sources. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.7.4 operation confirmed (simple test OK)
Main specifications: W420 x H105 x D294 mm 3.9 kg
Maintained by the manufacturer! This is an advanced TEAC model equipped with the Dolby S-NR, which has a reputation for low noise. The design is also high, and the feel when actually operated is easy to set, and the ease of handling is also one of the attractions. The sound quality is transparent and smooth, and I like the analog-like sound. Serial 40569 (Tomoho Asaine)
Maintenance information: 2024.7.4 Maintained (belts and capacitors have been replaced, and electrical adjustments for re-recording have been carried out. I've checked the headphone volume level. The volume was reworked due to unavailability of parts. (Some gaps remain ※This product is compatible to the extent possible for models that are no longer supported.)
Accessories: instruction manual remote control
Main specifications: Recording/playback head with independent left and right calibrations: PCCC cobalt amorphous combination head erasing head: ferrite head frequency characteristics 15 Hz to 21 kHz (metal tape) W471 x H149 x D355 mm 10.5 kg
The price has been reduced! 2024/7/4 sales price 5,800 yen FOSTEX PM series active speaker system. The 5.5 cm caliber glass fiber diaphragm full range unit and rear bass reflex system achieve clear mid-high and deep bass in a compact body. The exterior is dull and has a feeling of use, and one rubber foot on the bottom is missing. Serial 0966102AD (Takahashi Nobuyuki)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual, AC adapter connection cable
Main specifications: 5.5 cm full range unit rear bass reflex type frequency characteristics 80Hz to 35kHz output 5W+5W (with variable volume) input RCA pin jack ☓ 2 (active speaker side only) S/N ratio 78dB external dimensions W86 x H175 x D120 mm mass approx. 775 g (active side) approx. 675 g (passive side)
The price has been reduced! 2024/7/4 sales price 12,000 yen There is no problem with operation, but since it is cheap, it is currently sold. Digital premain that excels at Onkyo. The simple design of the housing produces solid sound quality even at low volumes, so you can enjoy clear and clear sound. The exterior is dull and has a feeling of use. Serial D750020981 (Takahashi Nobuyuki)
Maintenance information: 2024.7.4 operation confirmed
Accessories: instruction manual, power cable, remote control (*The remote control is an RC-660S for other models, can only be used to switch between VR and INPUT)
Main specifications: 40W+40W (8Ω) frequency characteristics 10Hz to 60kHz W435 × H124 × D344 mm 7.3 kg
RCA cable 5.0 m pair is a basic and affordable RCA cable with a titanium-containing sheath boasting low loss and high Sn and the largest cross-sectional area in its class (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: No accessories
An RCA cable uses 1.5 m pair silver-plated copper wire to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. There are stains and writing on the sheath (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
※ One lock screw is missing, so it's cheap (there are no problems with use) Gun-type banana plugs, set of 4, rhodium-plated, and a safety cover is hung on the main part, and the terminal connection part is structured to tighten the conductor with 2 M2 size hex screws (Tamura Eiji)
Accessories: case
PSE standard product. Oyaide's 6-prong power strip. This is a completely remade OCB-1 series. You can feel the high speed and high sense of sound, which is essential for modern audio. As for the exterior, tape is wrapped around the base of the plug. Also, there are adhesive marks on the bottom and undercarriage (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
Main specifications: 6 prong power strip cable length 2 m W120 x H60 x D120 mm 830 g
Speaker cable 2.0m pair end A Sonotone speaker cable developed with untreated home theaters in mind. Adopts a full-scale multi-4-core structure with a 2-type hybrid 2-layer multi-strand construction finish. On the exterior, the characters in part 1 have disappeared and there is dullness (Yonejima Satoshi)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: No accessories
Headphone compatible, speaker amplifier selector. Switch speakers on up to 2 channels. By simultaneously pressing all 1 to 2 channel switches (OUTPUT SELECT), it is possible to output a maximum of 2 channels from 4 speakers. Earphones with volume (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
*Currently sold. Sealed active subwoofer equipped with a 50mm unit. Equipped with a 200W ICEpower amplifier. It has a mushroom structure that increases unit strength and achieves both sharpness and volume, and a sturdy paper kevlar is used for the cone screwdriver. As for the exterior, there are scratches on the back. Serial 2003-0009982 (Yonejima Satoshi)
Maintenance information: 2024.7.4 operation confirmed
Accessories: instruction manual, power cord, connection cord
Main specifications: Unit 250mm long throw amplifier output 200W playback frequency band 20Hz to 25/140Hz (-6dB, when EQ A is selected) playback frequency response 27Hz to 40/140Hz (±3dB, when EQ A is selected) rated consumption output 40W (0.5W in standby) W310 x H310 x D375 mm 12.50 kg
It is a stylish SACD player with a design panel inspired by the famous CA-1000 and CA-2000 models of yesteryear. It has excellent transparency, thick mids, and sharp sound quality, and is particularly persuasive for piano expression in SACD. The exterior is good with no conspicuous scratches. Serial Y150610UW (Yonejima Satoshi)
Maintenance information: 2024.7.4 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 2 digital outputs (optical/coaxial) 1 analog output system (RCA) playback media SACD, CD, CD-R/RW for music (MP3, WMA playback possible) W435 x H137 x D440 mm 15 kg
Good level! Luxman tube power amplifier. Using KT88 as the output stage, it is a powerful yet highly transparent amplifier. It is a vacuum tube amplifier with excellent modern resolution and a sense of speed while being based on classical designs from the past. The exterior is good with no conspicuous scratches. Serial M71100055 (Yonejima Satoshi)
Maintenance information: 2024.7.4 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 25W+25W (4.8/16Ω) input direct 1 system variable 1 system output 1 system (4, 8, 16 ohm independent) power consumption 150 W 440 x 184 x D230 mm 16.1 kg
The price has been reduced! 2024/7/4 sales price around 298,000 yen is good! A new-generation Lux vacuum tube control amplifier with completely new equipment, such as an exterior design and the addition of balance inputs. A masterpiece where you can enjoy a traditional design full of nostalgia and a modern sense of transparency at the same time. There is a slight scratch on the remote control on the exterior. Serial G80400108A (Yonejima Satoshi)
Maintenance information: 2024.7.4 operation confirmed
Accessories: remote control, power cord, instruction manual
Main specifications: Vacuum tube/ECC83S x 3, ECC82 x 5 inputs/3 lines, 1 balanced system, 1 phono system, 1 phono system, 1 recording input/output/line 2 system output/line 2 systems, power consumption 32W, W440 x H169 x D307 mm, weight 13.3 kg
RCA cable, 1.0 m pair, 6N-7N hybrid conductor, twin core structure, thick and strong midrange, this hidden name cable is recommended for vintage audio. There are some stains and disappearing characters (Tamura Eiji)
Maintenance information: 2021.2.3 continuity confirmed
Accessories: No accessories
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm (Tamura Eiji)
Accessories: none
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm (Tamura Eiji)
Accessories: none
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm (Tamura Eiji)
Accessories: none
Set of 4 Audio-Technica's banana plug screw tightening method. It is a rear connection type that allows easy speaker settings, and is compatible with banana jacks with a diameter of 4 to 4.5 mm (Tamura Eiji)
Accessories: none
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Tamura Eiji)
Accessories: none
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Tamura Eiji)
Accessories: none
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Tamura Eiji)
Accessories: none
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug (Tamura Eiji)
Accessories: none
Set of 4 Since the contact part uses a cylindrical slit structure with a large contact area and many points can be captured, more sound information can be secured than a normal banana plug. Sound quality also tends to be good, and it is a banana plug with high cost performance (Tamura Eiji)
Accessories: none