The 1.5m power cable has a high attenuation rate of weak vibrations, and the sense of distortion is minimal due to the high rigidity, so the impression is that the sound quality is precise and accurate. Try it with a sound source with a large number of instruments, such as classical symphonies. In addition to the exterior and a lot of friction, you can also see a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Main specifications: blade beryllium copper (mirror polish) plating, thick silver plating (1.5 μm) + rhodium plating (0.3 μm) finish, chassis, high rigidity PBT (with 30% glass fiber), cover, high rigidity polycarbonate, completely non-magnetic, 125V/15A specification, PSE certified
1.5m high-purity copper power cable 30th anniversary limited edition model Acrolink's unique DUCC 7NCu conductor is used. The excellent resolution, transparency, and realism in the mid to low range are attractive. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: instruction manual, original box
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
PSE standard product ACROLINK POWER CONNECTOR Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Balance cable 1.0m pair stress-free 6N conductors Sound quality that is thicker than AcroLink and has a natural texture that shines with good balance. It is a character that is compatible with a wide range of devices. In addition to cracks in the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
Lead wire missing. Lightweight ADC headshell similar to SAEC ULS-2. The finger tip is slightly longer and the shape is easy to hold. The exterior has small scratches, abrasions, and dullness over time (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Main specifications: dead weight 6g
The price has been reduced. 2024/5/11 sales price 39,800 yen ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
The disposal price has been reduced! (Member prices are not applicable) 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
Vibration-absorbing insulators, set of 8, are superior in functionality and durability compared to general vibration-absorbing materials. It also has a great effect on preventing “fogging” of turntables, speakers, amplifiers, etc. The exterior has a feeling of use such as dullness and dirt (Jun Tamai)
Accessories: instruction manual
Main specifications: W20mm×H5mm×D20mm
An XLR cable 0.6 m pair uses the world's most advanced virtual coaxial structure, and by using the same structure as a line cable as well as a microphone cable, it achieves low capacitance and broadband transmission (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
The price has been reduced. 2024/6/24 sales price 49,800 yen Sound quality can be expected to improve simply by controlling the resistance value of the cable with an acoustic conditioner, which can be said to be a combination of AET's unique technology, and connecting it between the existing cable and the amplifier. The exterior has scratches on the printing, and there is dullness on the terminal part (Mizusaki Ryo)
Accessories: none
Main specifications: width 40 x total length 170 mm compatible cable 4.5 mm (up to 14 sq m)
Maintained in 2023/6! Comes with a cabinet. Genuine RF AGI's popular 511 preamp. The speedy and straight sound expression goes well with classical jazz, rock, etc., and also matches well with vintage speakers. The power turns on when you plug it into an electrical outlet, but this is the original specification. ※The front switch is for service outlets. There are scratches and scuffs on the exterior (Yonejima Satoshi)
Maintenance information: 2023.6.16 Maintained (flat cable manufacturing replacement (complete set)). Each SW and VOL cleaning (cracks cannot be completely removed). RCA hot side solder processing, caulking, cleaning, operation check) 2019.5.30 maintenance completed (internal check, C · R · TR· ic check OK, input flat cable replacement, connector replacement, push all SW cleaning)
Accessories: No accessories
Main specifications: 1 phono input system (MM compatible), 2 line input systems, frequency characteristics 20 to 20 kHz, W430 x H165 x D285 mm, approx. 8.7 kg
Maintained in April 2023! Genuine RF with cabinet AGI's popular 511 preamp. The speedy and straight sound expression goes well with classical jazz, rock, etc., and also matches well with vintage speakers. The power is turned on when the outlet is inserted, but this is the original specification*The front switch is for a service outlet. There are bruises on the exterior (Yonejima Satoshi)
Maintenance information: 2023.4.18 Maintained (each SW, VOL cleaning (main balance VOL cannot be cleaned because it is sealed) RCA hot side pin solder treatment. There are no C, R, or TR issues within the board. Operation check)
Accessories: No accessories
Main specifications: 1 phono input system (MM compatible), 2 line input systems, frequency characteristics 20 to 20 kHz, W430 x H165 x D285 mm, approx. 8.7 kg
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 6,500 yen. Internal Wiring Cable 2.0m Alpha Internal Wiring Cable It is a single-ply and popular black enamel (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
※It is currently sold because it is cheap. Small bookshelf speakers There is no habit, and it makes me feel more three-dimensional than the size (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex impedance 8 ohms sound pressure level 87 dB W130 x H215 x D190 mm 2.7 kg
A speaker system incorporating Altech's 20cm coaxial 2-way unit into a self-made enclosure. The sharpness is the same, but the impression is different from Altech of yesteryear, adding clarity and delicacy. The exterior is good, but the saran net is slightly easy to remove (Mizusaki Ryo)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: saran net
Main specifications: W335 x H590 x D345 mm weight 12.1 kg (actual measurement) 20 cm full range 8 Ω maximum input 32 W
Full maintenance from the driver to the woofer, from the network to all exterior repairs and paint! The outstanding vocal band and the sense of energy of the resonating horn are amazing. The 500 Hz network makes well-balanced sounds at home (Murakoshi Yoichi)
Maintenance information: 2024.7.4 maintenance (exterior repair/full painting, horn painting. Saran net cleaning/repasting. Woofer maintenance (viscoid/center adjustment, cone paper coating, terminal cleaning) Driver maintenance: magnetic circuit gap cleaning/center adjustment, terminal cleaning) network maintenance (frequency characteristic check, ATT/terminal cleaning) unit detachment, horn stay installation processing, new wiring
Accessories: none
Main specifications: enclosure 828G woofer 416-8B driver 802-8D network N-501-8A horn 511B W760 x H1375 x D610 mm weight approx. 73.9 kg
The price has been drastically reduced! 2024/5/8 sales price 30,000 yen ※The exterior is in poor condition, so it's cheap. This is Altec's classic 1 inch 4-sectional horn. With a 1-inch driver of your choice, such as the 802-8D, you can enjoy the horn sound unique to Altec with good sharpness. The exterior has peeling paint and damage such as scratches and tape marks (Satoshi Yonejima)
Accessories: No accessories
Main specifications: crossover 500 Hz directional horizontal 90 x vertical 40 throat diameter 250 mm W600 x H270 x D 486 mm 6.7 kg
The price has been drastically reduced. 2024/6/19 sales price 12,000 yen. Made of ultra-short horn plastic with 2 screw holes It is said that the previous owner used it on the Altec 802. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch 75mm, throat diameter 96mm, W160 x H160 x D110 mm (actual measurement)
The disposal price has been reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
The disposal price has been reduced! Member discounts are not applicable. 2024/6/20 sales price 998,000 yen Exterior repairs, paint, drivers, networks, etc. have already been maintained and the interior and exterior have been refreshed! The outstanding vocal band and the sense of energy of the echoing horn are remarkable. Please experience the sound full of energy typical of ALTEC (Oikawa Tetsuji)
Maintenance information: 2024.6.20 maintained (exterior repair/all painted horn/stay paint saran net cleaning/reinstall woofer maintenance: single-sided magnetic circuit in-gap cleaning/center adjustment driver maintenance: magnetic circuit rust removal/in-gap cleaning/center adjustment network maintenance: frequency characteristics check/ATT cleaning unit detachable, new wiring)
2014.10.26 maintenance (driver 288-16K single side ALTEC genuine diaphragm replacement, magnetic circuit slit maintenance)
2014.3.19 Maintained (exterior cleaning, chipped putty filling, paint peeling touch repair, saran net partial cleaning. Network terminal cleaning, ATT (SW type) cleaning, correction of wiring cut points, capacitor replacement, input/output waveform and balance check, sound output check, frequency characteristic measurement check (~ 42 kHz) *Capacitors are difficult to remove before replacement, so they are left inside
Accessories: none
Main specifications: woofer 515E driver 288-16K horn 311-90 network N-500F-A enclosure 828G size (828G) W760 x D610 x H1060 mm height to the top of the horn 1480 mm weight 100.0 kg/1
The price has been reduced! 2024/5/8 sales price 12,000 yen ※The exterior is in poor condition, so it's cheap. 1 bottle only Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center of the cone center of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
The price has been reduced! 2020/11/9 sales price 70,000 yen Maintenance has been completed. This is a 2-way network. The bass is also extruded well, and the high frequency adjustment range can be taken widely with 2 types of HF/MF attenuators, so it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to use. Serial 05234 07210 (Kono Makoto)
Maintenance information: 2020.11.9 maintained (solder removal, rust removal treatment cleaning, ATT (x4) contact disassembly cleaning, contact grease application frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: W114 × H190 × D228 mm 1.8 kg, crossover frequency 1.2 kHz, impedance 8 Ω, level control is continuously variable in the middle range up to -8 dB at 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
HDMI cable, 3.0 m, is an affordable HDMI cable with a wired cord from Amazon Basic. Details will be unknown (Tomoho Asaine)
Maintenance information: 2024.5.3 unchecked
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable. Sturdy single wire. Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/24 sales price 45,000 yen An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. There is a warp on the top surface. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
The price has been reduced. 2024/6/24 sales price 45,000 yen An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. You can see a feeling of use, such as appearance, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
The price has been reduced. 2024/6/24 sales price 45,000 yen An audio board with a ball point contact structure. The high damping effect of point contact quickly dampens equipment vibrations. Furthermore, it has an excellent seismic isolation effect against shaking from 360 degrees in the horizontal direction. A feeling of use can be seen on the exterior, peeling of the veneer, dullness, marks, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Effective space: W590 x D490 mm Load capacity: approx. 250 kg W650 x H44 x D550 mm 14.5 kg
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
※The broken frame of the saran net is being repaired. The top model of the company's 30th anniversary model SCM50! This is a luxurious product that uses high quality parts not used in standard models, such as a coil using pure silver wire for the interior and pure silver plating for the speaker terminal. The exterior is faded on the front, and there are small scratches on the top plate. There is a noticeable blow to the back (Oikawa Tetsuji)
Maintenance information: 2024.6.30 sweep test, operation confirmed
Accessories: instruction manual, spike, spike base, jumper plate
Main specifications: 3-way 3-speaker bass reflex type 88dB 8Ω W400 x H1163 x D500 mm 66.4 kg
Tweeter has been maintained! An extremely heavy center speaker with a large unit tightly packed into a compact enclosure. An amplifier with driving power is required, but it reproduces vocals with a sense of temperature. There are abrasions and paint peeling along the corners (Kojima Yosuke)
Maintenance information: 2024.7.5 maintained (complete magnetic circuit disassembly, assembly and repair due to removal of the tweeter from the ATC tweeter repair main body, detachment management costs, tweeter repair, and neodymium magnet rust)
Accessories: jumper plate
Main specifications: 2 way 3 speakers, sealed playback frequency band, 48 Hz to 20 kHz, crossover frequency, 2.5 kHz, output, sound pressure level, 86 dB, impedance, 8 ohms, W600 x H212 x D300 mm, 26.5 kg
Maintained in 2022! Comes with a dedicated stand. Studio monitor speaker with an internal volume of 100 liters. It can also be enjoyed as a listening speaker with sharp mid-high frequencies and low frequency playback that is tight yet has a sense of volume. There is a scratch around the scoker on one side of the exterior (Mizusaki Ryo)
Maintenance information: 2024.7.6 maintained (exterior repair (cleaning/touch up/heavy agent repair/color loss coloring), jumper creation
Saran frame repair/net replacement)
Accessories: jumper plate, stand
Main specifications: 3-way 3-speaker frequency characteristics 30 Hz to 20 kHz output sound pressure level 88 dB/w/m impedance 8 Ω crossover frequency 350 Hz, 4 kHz W 398 x H832 x D424 mm 70 kg/book
The price has been reduced. 2024/7/4 sales price 108,000 yen*Equipped with a MM/MC compatible phono board P100 (currently set to MM). It has a sense of strength that cannot be imagined from a compact frame, and I also feel the flexibility and responsiveness. This is one that you can enjoy regardless of genre. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 100W/8Ω, 140W/4Ω, compatible impedance 8Ω/4Ω, playback frequency band, 5Hz-100kHz, 5 analog input systems, 2 analog output systems, W440 x H90 x D255 mm, 11.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 69,800 yen ※Currently sold. Audio Alchemy D/D converter, D/A converter, and power supply set. It's a thick sound that shows the vocals' sense of position. The exterior has dullness and scratches (Hiura Katsuji)
Maintenance information: 2023.11.22 sound output confirmed
Accessories: instruction manual, power cord, 2 connection cords
Main specifications: DTI-PRO32: W210 ✕ H53 ✕ D172mm weight 2.0kg (including power supply)
Set of 4 insulators An audio alchemy insulator using a patented special polymer. It is thought to be unused, but there is stickiness (Kobayashi Hitoshi)
Accessories: case
Main specifications: diameter 48mm height 13mm
Set of 4 insulators An audio alchemy insulator using a patented special polymer. It is thought to be unused, but there is stickiness (Kobayashi Hitoshi)
Accessories: case
Main specifications: diameter 48mm height 13mm
Set of 4 insulators An audio alchemy insulator using a patented special polymer. It is thought to be unused, but there is a crack in the case (Murakoshi Yoichi)
Accessories: case
Main specifications: diameter 48mm height 13mm
The disposal price has been reduced. Member discounts are not applicable. 2024/6/17 sales price 128,000 yen It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material with excellent magnetization characteristics, drastically improving internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (board vibration check connection check. Flat amplifier module, all unit pattern parts added solder) 2024.4.13 maintained (electrolytic capacitor replacement in amplifier module. Pattern correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
A simple power supply noise filter that is inserted in parallel into a circuit. It is said to be effective against noise flowing back from power amplifiers and digital devices. The higher the number, the more effective it is, and the more effective it is when attached to something other than an audio room. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: Power filter AC 100 to 250 V 50/60 Hz