Maintained! Popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units. The exterior has small scratches, threads, dirt, etc. (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, terminal damage replacement. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
Maintained! A type with few exhibits! Crossover 800 Hz network. It is an essential gem for a 2-way system. There is a feeling of use, stains, and small scratches (Ryo Mizusaki)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, cap damage replacement. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: Impedance/bass range 8 ohms, treble range 16 ohms, crossover 800 Hz, high frequency boost, 3 stage switching
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? There is a feeling of use on the exterior, such as dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: loss over frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Maintained on 2015.6.11. The graininess of the sound has been clarified, and the smoothness of the connection has also been improved. It is a crossover 1200 Hz network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has paint peeling and stains. Serial 9858/9958 (Miura Kimiya)
Maintenance Information: 2015.6.11 Maintained (terminal polishing, cleaning, insulation bush mounting screw replacement. ATT cleaning. Input/output waveform and balance check, sound output check. (Frequency characteristic measurement check)
Accessories: no accessories
Key Specifications: Crossover 1200Hz 8Ω 3-Position Switch with Level Control
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? There is a feeling of use on the exterior, such as dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
The price has been reduced! 2024/6/27 sales price 79,800 yen A shell oval needle features the original direct sound of the SPU. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. The needle cover is partially chipped. Serial 412790 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
※It is inexpensive because the urethane coating has deteriorated. Maintained. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. Exterior and paint deterioration are conspicuous, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.28 maintenance (power stage/driver stage TR check → OK, DC INPUT bypass C gain setting C replacement, other C/R checks, operation tests)
Accessories: power cord, instruction manual (copy)
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
The price has been reduced. 2024/7/2 sales price 79,800 yen Maintained in 2023/6! The world's first control amplifier compatible with different vacuum tube replacements. It's a compact size that you can play with. Although it is an optional 5AR4 rectifier tube, the USB module is not implemented. There is a scratch (Daiki Goto)
Maintenance information: 2023.6.21 Maintained (balance volume replacement. Rewiring. Jumper wire solder fix. Rotary switch and shaft guide tack correction. Locking agent application. Vacuum tube pin cleaning. Voice check for each input and output. The USB module is not installed. (ECC83 3)
Accessories: power cable
Main specifications: 4 input systems, 2 output systems ECC83S x 3, SOVTEC 5AR4 x 1 size W250 ✕ H135 ✕ D225 mm weight 3.6 kg
The price has been drastically reduced. 2024/6/12 This is a musical instrument model with a sales price of 79,800 yen 150-4H. It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to put it in a front load enclosure or the like and make a loud noise. In addition to discoloration of the exterior and corn paper, mold and dirt on the edges, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
The price has been drastically reduced. 2024/5/24 sales price 79,800 yen This is a standard professional 1-inch screwdriver model. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been drastically reduced. 2024/6/6 sales price 79,800 yen Maintenance has been completed, such as edge softening treatment and exterior repairs. The successor to the DS-505 with a DUD boron dome in the high range. It is a model set to be the standard for the CD era, and the sound connection between each unit is smooth, and the sense of stability in the mid to low range is attractive. You can see a feeling of use, such as appearance, dullness, corrosion, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (edge softening treatment, exterior repair/cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system 6 ohms playback frequency band 30 Hz to 40,000 Hz output sound pressure level 90 dB W390 x H720 x D377 mm 33 kg
Maintained in 2023/5! A 2-way and 3-way channel divider that can be switched in a variety of ways. It is compatible with various crossovers, can be adjusted at a detailed level, and is extremely easy to use. The exterior has a feeling of use such as dullness. Serial 200213 (Tomoho Asaine)
Maintenance information: 2023.5.11 Maintained (power supply fuse replacement, other sound output during confirmation, transistor and capacitor replaced to confirm Chilean noise, current output test after parts replacement)
Accessories: copy of instruction manual
Main specifications: 3-way/2 way Low150/250/400/600/800/1kHz High1.5k/2.5k/3.5k/4.5k/6k/8kHz W200×H149×D316mm 3.8 kg
The price has been drastically reduced! 2024/5/18 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with an upper and lower 20cm woofer. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
Maintained! An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial 33780 33949 (Hiroki Aso)
Maintenance information: 2024.6.27 Maintained (diaphragm installation adjustment pad, 2 dampers, replacement, distribution terminal, contact part cleaning, 8 insulation bushings, replacement, diaphragm dirt cleaning, DCR (33941/6.2 ohm diaphragm with small scratches)
DCR (33941/6.0 ohm diaphragm without scratches)
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
※This is a replacement for linear equalizer knobs. Maintained! Lax's transistor pre-main advanced model. Compared to the L-500 series, which has a thick middle range, the treble is clear. It's an astringent sound that can also be imagined from the design. You can see a feeling of use such as appearance, dullness, paint deterioration, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.22 Maintained (switch disassembly contact cleaner applied. Replace deteriorated transistors in each circuit. Knob shaft extension installation (I/O pin jack polish)
Accessories: copy of instruction manual, power cord
Main specifications: 55W+55W (8Ω) Phono2 system W485 × H165 × D300m 12.5 kg
The price has been reduced. 2024/5/13 sales price 75,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the goal of suppressing speaker stress by absorbing and releasing it without applying a load due to the diamond formation structure (Daiki Goto)
Accessories: spikes, T-PROP
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/8 sales price 89,800 yen You can enjoy the voluminous bass with highly efficient and heavy corn paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are small scratches etc. on the exterior. Serial 7413 10417 (Tomonori Asaine)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but the location mechanism that allows you to move it to the desired position and play is convenient, so you can easily enjoy analog. There is a feeling of use such as button corrosion and dullness (Daiki Goto)
Maintenance Information: 2024.5.25 Maintained
Accessories: M44G, EP adapter, instruction manual
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
Maintained! Comes with a remote control. This model was created by gathering the know-how of the Integra series. There are only models produced with a thorough emphasis on sound quality, which is a bit different from other Integra series, and has a relaxed, relaxed sound. The exterior has dullness, threads, and small scratches. Also, the SP terminal has been replaced. Serial 6301012428 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (disassemble the push switch and remote wire switch, polish the contacts, and apply contact cleaner. Volume contact correction. Remote control operation check OK)
Accessories: remote control, instruction manual
Main specifications: 155W+155W (6Ω) 120W+120W (8Ω) damping factor 400 (8Ω) frequency characteristics 2Hz to 100kHz W471 ✕ H170 ✕ D430 mm 26.6 kg
The price has been drastically reduced! 2024/5/25 sales price 79,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1ohm diaphragm without scratch) DCR (B/6.3ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
Maintained! A pure Class A premain amplifier from the early days of the musical Fidelity. The top plate heats up due to the high calorific value, but it is a famous machine that still boasts high popularity for its elastic, bouncy mid-low range, and smooth, thick mid-high range sounds. The beauty of the simple design is also attractive. There are small scratches and scratch marks on the exterior. Serial 11418 (Tamura Eiji)
Maintenance Information: 2024.7.3 Maintained (input selector switch contact cleaning. The TAPR and MM/MC changeover push switches were replaced due to poor contact. 17 capacitors were replaced due to differences in electrolyte condenser fluid leak levels. (Each input/output operation check is OK)
Accessories: instruction manual
Main specifications: pure A grade 20W+20W (8Ω) W408 x H60 x D249 mm 5.5 kg
The winding of the mainspring is smooth and can produce sound, but there is rotation noise, unevenness, and sound shake, so it is sold as it is. The volume is not big, but I feel good in the middle and high range center. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.1 operation confirmed
Accessories: handle
Main specifications: W358 × H260 × D295 6.85kg (actual measurement)
Maintained by the manufacturer! The last CD-only model in the 1650 series. Equipped with a well-balanced AL24 processing circuit. It supports the foundation of music with a stable mid to low range. The large amount of information peculiar to dedicated CDs is valuable nowadays. You can see a feeling of use on the exterior, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.25 Manufacturer maintained (headphone VR disassembly and cleaning. Loading belt, tray opening/closing SW, CD traverse mechanism replacement. Top cover cleaning. (Others, inspection of each part, sound test)
Accessories: copy of manual, power cord, remote control (replacement)
Main specifications: 1 digital output system, 1 coaxial system, 1 analog output system, frequency characteristics 2 Hz to 20,000 Hz W434 × H135 × D340 mm 12.7 kg
Maintained. A horn-shaped tweeter developed for the D Series high range using plastic edges. 8Ω specification, compatible horn is CO-800. In addition to being sharp, it is characterized by a precise and delicate sound. Overall, there are dullness, small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.23 Maintained (distortion, vibration repair: magnetic circuit slit corrosion prevention, various parts stop noise, complete maintenance)
Accessories: none
Main specifications: Mid-high range driver, hard duralumin dome, plastic edge, frequency characteristics, 800 to 20,000 Hz, 102 dB, diameter 108 mm x D110 mm, 3.7 kg/bottle
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
A 6.0-meter pair speaker cable was introduced in a large quantity, with 100 strands of 0.26φwire using Acrolink's unique DUCC 7N CU. Try out the results in the symphonic strings section! You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance Information: 2024.7.1
Accessories: none
Maintained! An American-made preamp with a rugged look. Comes with phono MM/MC. Details are unknown, but the sound quality is dry and straight. I tried pairing it with JBL, and the dry feel feels American. It is a very unique preamp full of unusual features, such as L and R blending functions. Serial 01362 (Tomonori Asaine)
Maintenance information: 2024.7.6 maintained (volume cleaning, earth treatment, RCA cleaning, operation check ※ switches are sealed, so cleaning is not possible, some debris cannot be removed)
Accessories: none
Main specifications: size W490 x H112 x D258 mm weight 5.9 kg
The price has been drastically reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The price has been drastically reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner. It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches simultaneously (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
Output transformer sales secondary: 50-100-200Ω x 2 ※ The primary side seems to be 5 kΩ from the model number. The resistance value has been measured by the tester (between P1-P2:141.8 Ω, between P1 (P2) -B: 71.0 Ω, between 0-50 Ω: 8.2 Ω, between 0-100 Ω: 11.5 Ω, between 0-200 ohms: 16.1 Ω) W110 x H150 x D80 mm 3.6 kg/pcs (actual measurement, not including protrusions) There are fine scratches and paint peeling (Kojima Yosuke )
Accessories: none
※Inexpensive because there are scratches on the top plate and edge on one side. This is the newest bookshelf in the Focal Tiba series, which will be introduced for the first time in Hi-Fi. Clear and well-balanced sound is achieved with the company's proprietary TNF tweeter and slateFiber diaphragm driver (Murakoshi Yoichi)
Maintenance information: 2024.7.4 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 2 way 8Ω 89dB W212 x H392 x D260 mm 7 kg
The price has been reduced! 2020/11/9 sales price 70,000 yen Maintenance has been completed. This is a 2-way network. The bass is also extruded well, and the high frequency adjustment range can be taken widely with 2 types of HF/MF attenuators, so it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to use. Serial 05234 07210 (Kono Makoto)
Maintenance information: 2020.11.9 maintained (solder removal, rust removal treatment cleaning, ATT (x4) contact disassembly cleaning, contact grease application frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: W114 × H190 × D228 mm 1.8 kg, crossover frequency 1.2 kHz, impedance 8 Ω, level control is continuously variable in the middle range up to -8 dB at 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen There is no problem up to PCM384 kHz, but when USB/I2S is input, a noise called Zar is regularly added along with the sound due to DSD64/128 playback, so it is currently sold at a low price. D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 79,800 yen ※It is cheap because the color fades due to sunburn on one side. A classic bookshelf speaker with a small yet firm sense of volume and texture that makes a good impression. It reproduces music without choosing a genre. There is a feeling of use on the exterior due to sunburn, small scratches, etc. (Tamai Jun)
Maintenance information: 2024.5.31 sound output confirmed
Accessories: saran net jumper plate
Main specifications: Playback frequency band 45Hz to 50kHz 8Ω W165 × H280 × D260 mm 6.7 kg/1
The price has been reduced! 2024/6/12 sales price 69,800 yen This is an A4 size compact headphone amplifier with built-in D/A converter. The DAC chip is equipped with 2 of the latest Asahi Kasei Electronics' DAC VERITA AK4490, and is compatible with native playback in DSD 11.2 MHz and PCM 384 kHz/32 bit formats! Using a high-precision volume that can be set in 256 steps, it can also be used as a higher quality preamp. The exterior is dull. Serial 1860010 (Yonejima Satoshi)
Maintenance information: 2024.6.13 continuity confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: PCM data sampling frequency 32/44.1/48/88.2/96/176.4/192kHz DSD data sampling frequency 2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) USB input sampling frequency 32/44.1/48/88.2/96/176.4/192/352.8/384 KHz W290 × H84.5 × D248.7mm 4.2kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
The disposal price has been reduced! (Member price not applicable) 2024/6/7 sales price 79,800 yen DSD compatible network audio player. It is possible to play music files on DLNA1.5 compliant media servers such as PCs and NAS connected to a home network. It is also equipped with a USB TypeA/TypeB terminal. A high-capacity external hard disk, iPod/iPhone, USB memory input, a maximum 384 kHz/32 bit high-resolution sound source, and an asynchronous USB DAC function that enables native playback using a DSD sound source have also been realized. The exterior has a feeling of use such as dullness. Serial NJIV000297JP (Asaine Tomo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control manual power cord
Main specifications: sampling frequency 32 to 192 kHz DSD 5.6 MHz/2.8 MHz, compatible format DSF FLAC WAV MP3 WMA AIFF ALAC digital input/optical/coaxial iPod/iPhone USB memory external USB hard disk network terminal LAN (100base-TX/10base-T) W435 x H121 x D339 mm 12.5 kg
The price has been reduced! 2024/7/3 Rottel pre-main amplifier with a sales price of 69,800 yen. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive, high-quality sound quality is compatible with a wide variety of genres. The exterior is dull on the top plate. *Remote control is not included. Serial 867-9451051 (Yonejima Satoshi)
Maintenance information: 2024.7.3 operation confirmed.
Accessories: power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (board vibration check connection check. Flat amplifier module, all unit pattern parts added solder) 2024.4.13 maintained (electrolytic capacitor replacement in amplifier module. Pattern correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been reduced! 2024/7/2 sales price 69,800 yen Maintained! JBL UREI standard channel divider. Recommended for those using JBL4345 or 4355 with 2 way/290 Hz specifications. A must have for multi-channel systems in 70s PA systems. There are small scratches and dullness on the exterior. ※The balance connection is No. 3 HOT. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 8254 (Yonejima Satoshi)
Maintenance information: 2024.7.2 Maintained (The remodeled part has been restored. Replace the electric capacitor on the smooth part of the power supply. Solder correction. ATT cleaning. (Missing screws added)
Accessories: No accessories
Key Specifications: Crossover 290 Hz W483 ✕ H44 ✕ D194 mm Weight 1.8 kg
The price has been drastically reduced. 2024/4/24 sales price 69,800 yen ※Since the digital input circuit module cannot be repaired, the digital input cannot be used. Maintained! Kenwood pre-main amplifier. It plays clear, transparent mid-high frequencies and low frequencies with a firm sense of power typical of Kenwood in a well-balanced manner. There is an air cap mark on the top of the front panel. (KOBAYASHI Hitoshi)
Maintenance information: 2024.4.24 Maintained (input board connector correction, switch correction, contact correction, operation confirmation) 2023.5.21 Maintained (display lamp replacement. Switch and volume contact correction. (*The digital circuit module is broken, but the digital input cannot be used because it is not available)
Accessories: none
Main specifications: 150W+150W (8Ω) phonomC/mm mounted damping factor 1000 W 476 x H170 x D424 mm 19.7 kg
*Currently sold. First arrival! A stereo power amplifier using germanium transistors. It sounded right away at the store, but the sound is much softer and more soothing than the sound of silicone. The output is modest, but it's good enough as long as it's not loud. There are 2 non-genuine simple adapter types as power supply units (Sasaki Shota)
Maintenance information: 2024.7.4 sound output operation confirmed
Accessories: Power supply unit x 2
Key Specifications: Germanium stereo power amplifier 3W+3W