Victor DT-27 0.5mm SUPER DX equivalent Replacement needle for MD-1012Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-25H equivalent. Replacement needle for EG-82476 and MD-1011Z. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
Equivalent to the National EPS-75ST Replacement needle for EPC-75 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Equivalent to Hitachi DS-ST16. Replacement needle for VFS-160 It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Replacement needle for XL-25 (A), equivalent to SONY ND-25E. It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for XL-25 (A), equivalent to SONY ND-25E. It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: original box
SONY ND-200G equivalent Replacement needle for XL-20G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-150G equivalent. XL-150G replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-143G equivalent. Replacement needle for VL-43G (S) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Sony ND-143G equivalent. Replacement needle for VL-43G (S) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
SONY ND-142G equivalent Replacement needle for VL-42G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
SONY ND-142G equivalent Replacement needle for VL-42G It has not been opened and the operation has not been checked (Kobayashi Hitoshi)
Maintenance Information: Unopened
Accessories: original box
Sony ND-14G equivalent. Replacement needle for VL-14GS (2) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Sony ND-14G equivalent. Replacement needle for VL-14GS (2) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Sony ND-14G equivalent. Replacement needle for VL-14GS (2) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Sony ND-14G equivalent. Replacement needle for VL-14GS (2) It is unopened and operation has not been checked (Kobayashi Hitoshi)
Accessories: original box
Sony ND-138G equivalent Replacement needle for VL-38G. It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: none
SONY ND-138G equivalent Replacement needle for VL-38G It has been opened, but since there is no target cartridge, operation has not been checked (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-137G equivalent. Replacement needle for VL-38G. It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Sony ND-131G equivalent VM-1200G replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The price has been drastically reduced! 2024/5/22 sales price 348,000 yen Everything from the motor power supply to the tone arm has been fully maintained! NEW DUST COVER CREATED! A player with a long-arm Ortofon/AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2 kg double 16 pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Arm base for TD-124 The previous owner had a GRACE short arm G-454 installed (the hole is cracked). There is paint peeling on the back side (Murakoshi Yoichi)
Accessories: none
Main specifications: arm hole diameter 35 x 25 mm W73 mm x H13 mm x D324 mm
Replacement needle for Hitachi DS-ST35 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for Hitachi DS-ST35 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to Hitachi DS-ST26 Replacement needles for VFS-260 and VFS-261. It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Hitachi DS-ST23 Replacement needle for MT-23 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The price has been reduced! 2024/7/4 sale price 9,800 yen Sony single river cassette deck. Equipped with a Dolby NR B type that can record with less noise. CD synchronous recording is possible in conjunction with DHC-MD373, DHC-MD333, and FH-MD11. There is a feeling of use such as dullness on the outside (Tomoho Asaine)
Maintenance information: 2024.7.4 operation confirmed
Accessories: none
Main specifications: WOW flutter 0.07% WRMS frequency characteristics 50Hz to 15kHz±3dB (TYPE II) SNR ratio 50dB (when Dolby NR is off) size W215 x H60 x D230 mm weight approx. 2.5 kg
Replacement Cartridge for Multi Record Player TCE-262P Pack of 3 Operation not confirmed. If you have been looking for one, please take this opportunity (Kanai Hidetsugu)
Maintenance information: There is no compatible device and operation has not been confirmed
Accessories: needle cover, instruction manual
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
*Remote control is missing (VR adjustment with remote control is not possible due to VR replacement). Maintained! An advanced ESL series aircraft, a heavyweight premain with a high-rigidity G chassis. Equipped with a MOS FET, the sound is spacious and powerful. The exterior is dull and has small scratches (Ryo Mizusaki)
Maintenance information: 2024.6.21 maintained (mute push SW replacement, main VR with sound replacement, other speaker relay deterioration replacement, input switching, all tact SW replacement due to poor SW contact, other resistors 120Ω, 100Ω deterioration replacement, other sound direct SW disassembly contact polishing cleaning, speaker switching SW, stereo/mono switching SW, direct INPUT switching SW, direct INPUT switching SW disassembly contact polishing cleaning grease application, DC bias (The DC balance has been adjusted and the sound output for each input/output connection has been confirmed)
Accessories: copy of instruction manual
Main specifications: output 170W+170W (4Ω) 140W+140W (6Ω) 120W+120W (8Ω) W470 x H170 x D435 mm 24 kg