TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
The price has been reduced. 2021/5/6 sales price 7,000 yen turntable seat for Garrard 301. The condition is not very good, such as slight undulations and wrinkles. (KONDO HIROTSUGU)
Accessories: original case
The 1.8 m PSE standard PCOCC-A conductor 3-layer shield plug is phosphor bronze plated with gold and palladium, and a tight sound comes to the front, giving it a sense of dynamism. Although it is an affordable cable, you can feel significant changes due to power cables, and it is a high cost power cable. ※The wire material is hard, and this cable is slightly difficult to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.7.3 continuity confirmed
Accessories: No accessories
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Designed for the purpose of absorbing and diffusing sound over a wide band, it has excellent absorption capacity in the low range, and effectively removes fixed material waves by installing it in the corner of a room (Daiki Goto)
Accessories: none
Main specifications: size 1200 mm x 240 mm, weight 4.1 kg (actual measurement)
Maintained. A 70s varicon-type tuner developed with an emphasis on reception sensitivity and sound quality. An irresistible look for early Sansui fans. The rugged, masculine atmosphere feels subdued. It's an attractive tuner with a flat yet textured tone of voice. There is a feeling of use on the exterior, dullness, abrasions, stains, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 maintenance (MPX circuit, power circuit transistor replacement due to deterioration. Switch and volume cleaning. (Tracking adjustments and other overall adjustments)
Accessories: original box
Main specifications: FM tuner part: sensitivity (IHF) 1.5 μV frequency characteristics 30 Hz to 15 kHz AM tuner part: sensitivity 45 dB/m W460 x H176 x D310 mm weight 9.6 kg
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
The price has been reduced. 2024/6/24 sales price 49,800 yen Sound quality can be expected to improve simply by controlling the resistance value of the cable with an acoustic conditioner, which can be said to be a combination of AET's unique technology, and connecting it between the existing cable and the amplifier. The exterior has scratches on the printing, and there is dullness on the terminal part (Mizusaki Ryo)
Accessories: none
Main specifications: width 40 x total length 170 mm compatible cable 4.5 mm (up to 14 sq m)
The disposal price has been reduced. Member discounts are not applicable. 2024/6/17 sales price 128,000 yen It is a transformer that has improved the instantaneous power and power of the reproduced sound by adding improvements to the HI-PC core material with excellent magnetization characteristics, drastically improving internal loss and special impregnation treatment. The exterior is dull and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.17 Operation confirmed
Accessories: instruction manual, original box
Main specifications: impedance 1-10Ω load impedance 47kΩ boost ratio 20dB (3Ω/47kΩ/1 kHz) W160 × H73 × D128 mm
Replacement needle for TRIO/KENWOOD cartridge V-39MKIII Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
Replacement needle for TRIO/KENWOOD cartridge V-37 It's unchecked because it's only an exchange needle (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for TRIO and KENWOOD V-36 cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needles for T-30 and V-30 TRIO KENWOOD cartridges. Unchecked because it is only a replacement needle (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for Toshiba cartridge C-34M It is unchecked for replacement needle only. (Mizushima Itsuro)
Maintenance information: 2021.7.3 unchecked
Accessories: original box
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
※Inexpensive because there are scratches on the top plate and edge on one side. This is the newest bookshelf in the Focal Tiba series, which will be introduced for the first time in Hi-Fi. Clear and well-balanced sound is achieved with the company's proprietary TNF tweeter and slateFiber diaphragm driver (Murakoshi Yoichi)
Maintenance information: 2024.7.4 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 2 way 8Ω 89dB W212 x H392 x D260 mm 7 kg
The price has been reduced. 2023/6/1 sales price 25,000 yen A fully discrete genuine analog amplifier designed with an amplifier using a total of 10 pairs of carefully selected transistors without using an operational amplifier. It's lightweight, compact, and useful for portable applications. The exterior has scratches and scratches on the main body (Mizusaki Ryo)
Maintenance Information: 2023.6.1 Sound output confirmed
Accessories: AC adapter, USB cable, silicone band, carrying case, original box
Main specifications: input 3.5mm mini terminal output 3.5mm mini terminal input impedance 30kΩ output 200mW (32Ω) 100mW (50Ω) 50mW (300Ω) 15mW (600Ω) W97 x D46 x H19 mm (including volume knob) weight approx. 117 g
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
PIONEER PL-N9 compatible equivalent Replacement needle for PL-C9 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
PIONEER PL-N9 compatible equivalent Replacement needle for PL-C9 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to PIONEER PN-330M/2 PC-330/2 replacement needle It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Victor ST-56. Replacement needle for MD-1056Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Victor ST-56. Replacement needle for MD-1056Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to Victor ST-56. Replacement needle for MD-1056Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Equivalent to the HITACHI DS-ST55. Replacement needle for MT-55 It is unopened and operation has not been checked (Hiura Katsutsugu)
Maintenance information: operation unconfirmed
Accessories: original box
Victor DT-41 equivalent. Replacement needle for MD-1041Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-41 equivalent. Replacement needle for MD-1041Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box
Victor DT-29 equivalent. Replacement needle for CS-1013Z It is unopened and operation has not been checked (Hiura Katsutsugu)
Accessories: original box