An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 from the structure, and the printing was determined to be a reprint. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 44 (rejected value 32) with a replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
※There is a TELEFUNKEN ECC803S, but the printing was determined to be CV4004 based on the structure. The plate is not a box type, only one side of the rib plate is caulked. Sold in 1 bottle, ECC83/M8137 equivalent tube, measured value 36 (rejected value 32) with replacement box ※The measured value indicates the gM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
RCA cable 1.0 m pair 6NCU (99.9999% pure copper), PCOCC, pure silver coated HIGHER-OFC, high-purity oxygen-free copper are characters that are easy to listen to with just the right amount of delicacy and volume. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
This model uses 4 types of wire, mainly untreated high-purity 6N copper at the 2.5 m end of the speaker cable. Of course, with the starcard system, where 2 of the 4 cores are twisted and connected to each other, it is also possible to use each of the 4 cores as bi-wiring by dividing them into high and low frequencies (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Speaker cable uses a 1.5m pair of untreated 6N high-purity copper thick aluminum wrap shields, and is a speaker cable with an excellent balance between the warmth of the sound of 6N copper and elongation in the high frequency range due to the silver coating. There is a slight stickiness. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
Power cable 0.9 m (unprocessed end) PSE standard is out of print by ONTOMO MOOK's “Stereo Edition” by ONTOMO MOOK, which is out of print, anyone can do it! It is only the wire from the appendix that came with the “Make Your Own Audio Accessory” magazine. You can enjoy clear sound with excellent cost performance. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
Speaker cable 2.0m pair end A Sonotone speaker cable developed with untreated home theaters in mind. Adopts a full-scale multi-4-core structure with a 2-type hybrid 2-layer multi-strand construction finish. On the exterior, the characters in part 1 have disappeared and there is dullness (Yonejima Satoshi)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: No accessories
Power cable 1.8 m PSE standard product, 4 types of hybrid original conductor+3 core structure, this is a long-selling cable that reproduces an expansive sound field, medium to high range with good coverage, and a wide range (Kanai Hidetsugu)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Phono cable uses a conductor that is a hybrid of high-purity oxygen-free copper, centering on 1.5m RCA-RCA specification ultra-high purity 6N copper. It is a model that incorporates various technologies in order to eliminate the ultra-fine low output power loss of MC cartridges as much as possible. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
Set of 4 Y-rugs Terminal kit for universal speaker cables with variable tips. It has an excellent structure that makes it possible to reliably contact extra heavy core cables up to 5.5 scares in diameter with a single hex wrench (Fujisawa Yukishi)
Accessories: hex wrench
Main specifications: high purity 24K plated cable insert size, inner diameter 3.8 mm to 5.8 mm, conductor (core wire) insertion part is 3.8 mm, Y lug tip size, maximum inner diameter 8.0 mm, minimum 6.0 mm/outer diameter 14.0 mm
Power cable 0.9 m (unprocessed end) PSE standard is out of print by ONTOMO MOOK's “Stereo Edition” by ONTOMO MOOK, which is out of print, anyone can do it! It is only the wire from the appendix that came with the “Make Your Own Audio Accessory” magazine. You can enjoy clear sound with excellent cost performance. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end of the 1.35 m end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor by hybridizing 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Pair tube, 5 pole tube, smoke mesh plate, made in England, measured value 34/34 (rejected value 25) with white box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, 5 pole tube, smoke mesh plate, made in England, measured value 36/36 (rejected value 25) with white box, so it's inexpensive because it makes a rattling noise in 1 tube ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
Maintained. A horn-shaped tweeter developed for the D Series high range using plastic edges. 8Ω specification, compatible horn is CO-800. In addition to being sharp, it is characterized by a precise and delicate sound. Overall, there are dullness, small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.23 Maintained (distortion, vibration repair: magnetic circuit slit corrosion prevention, various parts stop noise, complete maintenance)
Accessories: none
Main specifications: Mid-high range driver, hard duralumin dome, plastic edge, frequency characteristics, 800 to 20,000 Hz, 102 dB, diameter 108 mm x D110 mm, 3.7 kg/bottle
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
It is a stylish SACD player with a design panel inspired by the famous CA-1000 and CA-2000 models of yesteryear. It has excellent transparency, thick mids, and sharp sound quality, and is particularly persuasive for piano expression in SACD. The exterior is good with no conspicuous scratches. Serial Y150610UW (Yonejima Satoshi)
Maintenance information: 2024.7.4 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 2 digital outputs (optical/coaxial) 1 analog output system (RCA) playback media SACD, CD, CD-R/RW for music (MP3, WMA playback possible) W435 x H137 x D440 mm 15 kg
The price has been reduced. 2024/2/24 sales price 6,000 yen ※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep test good
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/7 sales price 29,800 yen This item is currently sold because dirt, tobacco smell, and feeling of use are conspicuous. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/19 sales price 24,800 yen. *Currently sold. YAMAHA bookshelf speakers. It is a high-resolution compatible model created by the designer of the “Soavo” series, which was highly acclaimed worldwide, and although it is an entry model, it is designed with particular attention to sound. Of course, the traditional high frequencies of the NS Series are excellent, and the fact that bass reflex dubbing, which is common on bookshelves, is suppressed is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: saran net, original box
Main specifications: 2-way bass reflex type (non-magnetic) playback frequency band 55 Hz to 45 kHz impedance 6 ohms allowable input 40 W maximum input 120 W output sound pressure level 87 dB crossover frequency 2.8 kHz W183 x H320 x D267 mm weight 6.1 kg
The price has been reduced. 2024/6/24 sales price 29,800 yen*Sound output is OK, but the video hasn't been checked, and the remote control doesn't work, so it's currently being sold. Yamaha's advanced AV amplifier released in 2008. Based on the design concept of the highest-grade model, flagship model, and DSP-Z11, it is a highly cost-effective amplifier that is based on a 7.1 channel layout that is easy to handle while also being expandable to 9.1 channels (Kojima Yosuke)
Maintenance information: 2024.6.8 Operation confirmed (sound output confirmed only with analog input (LINE, PHONO))
Accessories: remote control, instruction manual, power cable, sound collection microphone
Main specifications: 7.1 channel compatible, rated output, 140 w/ch HDMI input, 11 RCA inputs (including PHONO1), 1 multi-ch input system (6 ch/8 ch), 5 optical digital inputs, 3 coaxial digital inputs, 18 video systems (D5 x 3, component x 6, composite x 6), 1 dock port, 2 USB ports (USB1.1), Network 1 system (100base-TX/) 10Base-T) W435×H196×D441mm 19.6kg
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
The price has been reduced. 2024/6/3 sales price 15,000 yen*The attenuator is cheap and sold as is. This model was measured to improve the quality of the NS-500M. Carbon is used for the woofer. It has a transparent tone typical of Yamaha, has good response, and is made with digital sources in mind. Overall, there is a lot of feeling of use such as small scratches and dullness (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 3-way speaker 40Hz-20000Hz 6Ω 100W W374 x H678 x D324.5mm 23.5 kg
YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
Add a picture of the manual
A floor-type speaker with an authentic 3-way configuration with all-round appeal, from pure audio to theaters. The wide range playback has a sense of volume, and there is an exhilarating feeling that you can drop out the mids and highs that are particularly calm and easy to hear. The exterior is dull serial NO.I127588 I127593 (Watanabe Yuji)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual saran net jumper plate
Main specifications: 3-way bass reflex type (non-magnetic) playback frequency band 45 Hz to 50 kHz impedance 6 ohms sound pressure level 89 dB W354 x H1,012 x D374 mm weight 25.0 kg
An enclosure for Yamaha's SR speaker and S1520S incorporating the YST system. The opening for the 38cm woofer+horn is empty. The speaker terminal is 1 Speakon terminal. There is a feeling of commercial use (Murakoshi Yoichi)
Accessories: none
Main specifications: bass reflex floor type W540 x H780 x D438 mm 25 kg (actual measurement)
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
Yamaha premain amplifier compatible with DSD 5.6 MHz native playback and PCM384 kHz. It is equipped with cutting-edge equipment such as a USB DAC function, and has a convenient design that can be easily operated with only knobs and buttons, and boasts a clear and wide range that matches the times. There is dullness etc. on the exterior. Serial Y190170VW (Watanabe Yuji)
Maintenance information: 2024.7.2 operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: 100W+100W (8Ω) input 9 systems (CD x 1 tuner x 1 line x 3 phono MM x 1 optical digital x 1 coaxial digital x 1 USB Type B x 1) output 5 systems (reck-out x 2, subwoofer x 1, headphone x 1, USB-DC out x 1) W435 x H152 x D387mm 12.1 kg
Speaker cable 2.0m is a speaker cable with only one unprocessed end, LC-OFC with high resolution sound. The exterior has a feeling of use over time, such as threads and dullness (Tomoho Asaine)
Maintenance information: 2024.7.6 continuity confirmed
Accessories: none
※Inexpensive because it is in poor condition. YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. In addition to the exterior and logo plate being misaligned, there is a lot of feeling of use, such as dullness, conspicuous abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
A network CD player compatible with the latest lossless distribution service “Deezer HiFi,” which boasts sound quality equivalent to that of a CD. It is a player that is compatible with Yamaha's new function “musicCast,” and you can enjoy various music contents such as high-resolution sound sources. You can also easily enjoy music content on your smartphone or tablet. The exterior is dull. Serial T252419QS (Watanabe Yuji)
Maintenance information: 2024.7.2 operation confirmed
Accessories: remote control instruction manual power cable FM antenna
Main specifications: Compatible formats CD CD-R/RW (MP3/WMA) USB 2.0 input terminal RCA jack 1 optical digital 1 USB 1 LAN 1 wide FM (76.0 MHz to 95.0 MHz) W314 x H70 x D338 mm 2.9 kg
The price has been drastically reduced. 2024/7/4 sales price 298,000 yen with original box Yamaha's top CD/SACD player at the time. The D/A section is equipped with ESS Technology's new-generation 32-bit converter, SABRE (Sabre) 32 Reference DAC (ES9018). High quality design with fully balanced transmission at all stages, thorough low impedance, and high rigidity and low resonance construction. It is a model aimed at natural reproduction that reaches straight to the heart of the listener like an instrument. The exterior is also good with no particularly large eyes and no damage (Oikawa Tetsuji)
Maintenance information: 2024.7.3 operation confirmed
Accessories: remote control, instruction manual, power cable, spike holder, original box
Main specifications: CD/SACD player playable disc CD/SACD/CD-R/CD-RW frequency characteristics 2 Hz to 20 kHz (CD) 2 Hz to 50 kHz (SACD) W435 x H142 x D440 mm 19.2 kg