Maintained! A tubular mono power amplifier that makes you hear a profound, Macintosh sound. The highly transparent sound was restored through an overhaul. You can enjoy the relaxed and calm sound unique to vintage McKinn. This is a power amplifier I would like to try combining songs from yesteryear when I want to enjoy them with speakers from yesteryear. There is a feeling of use such as dullness, rust, and abrasions (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintenance (volume disassembly cleaning repair, vacuum tube 6550 replacement, vacuum tube socket and RCA jack re-caulking repair. No. 6595 side vacuum tube 12AU7, vacuum tube 5U4GB replacement, fuse holder retightening repair. Operation checked (measured at 48 to 66 W SP: 8 ohms with rated output AC 100 to 117 V) 2022.11.23 operation confirmed. 2021.9.5 maintained (block capacitor 35/80/15 μF replacement x 2, oil capacitor 0.22 μF replacement x 2, vacuum tube 12AX7 replacement 1 x 2, AC cord replacement 1 x 2, vacuum tube socket and RCA jack caulk repair No. 6878 electrolytic capacitor 8 μF other replacement, HUM replacement, 1/2 W resistor replacement No. 6595 vacuum tube 6550 replacement, vacuum tube 5U4GB replacement, resistor 2W exchange Other operation checked (rated output AC 100 to 117 V))
Accessories: none
Main specifications: 60W load 4Ω/8Ω/16Ω frequency characteristics 20 to 30,000 Hz W356 × H203 × D254 mm 20.7 kg
Everything from the exterior to the internal unit and network was fully maintained in January 2023! Comes with a dedicated trolley and a reflector on the back. Vitavox, which developed mainly commercial equipment for theaters in England, announced in 1947, the company's first high-end corner speaker system for home use. The gentle tone of the horn is full of unrivaled appeal. The elegant design, which can be said to be art suitable for the finest products, is also excellent (Daiki Goto)
Maintenance information: 2023.1.28 Maintained (exterior repair/cleaning, black paint on the back. Woofer maintenance (edge crack repair, magnetic circuit rust removal/gap cleaning/center adjustment.
Driver maintenance (magnetic circuit gap cleaning/center adjustment) network maintenance (terminal block cracks are bonded and reinforced with epoxy. Tuck in some of the terminal screws that are too long. Brush the ATT contacts and clean them. Characteristics were measured, and the results were good, and the original capacitors were continuously used. (Check the sound output)
Accessories: Self-made special trolley, self-made reflector
Main specifications: driver S-2 horn CN481 woofer AK-157 network CN458 W1120 x H1350 x D770 mm (actual measurement)
A bespoke woodworking shop, creative shed speaker stand. It also has a sense of rigidity, and the chic design is attractive. There is a feeling of use such as scratches (Ryo Mizusaki)
Accessories: none
Main specifications: W362 x H302 x D302 weight 5,5 kg
Maintained! It is a pre-main amplifier with a simple design and full functionality. It is a delicate and careful tone with a luster in a lively, extruded and energetic sound. It shines with a sense of power that goes well with vintage speakers. The exterior is scratched on the top plate, and there is a feeling of use over time. Serial E7V064 (Fujisawa Yukishi)
Maintenance information: 2024.6.29 Maintained (output relay, push SW, semi-fixed VR, electrolytic capacitor, and balance VR replaced. Rotary SW disassembly polishing cleaning. Knob adhesive solder fix. Removes mold and rust. Increase and tighten the screws. Interior and exterior cleaning. Bias and offset check adjustments. (Voice check for each input/output)
Accessories: copy of instruction manual
Main specifications: 150w+150w (8Ω) PHONO (MM/ MC) W445 × H160 × D370 mm 20.5 kg
※Since it is cheap, it will be handed over as is. A compact speaker from JBL. The wood-like design is also stylish. A speaker that is easy to listen to and use even for monitors. Although it is small, it makes a good JBL sound. The exterior is damaged, dull, and there is a feeling of use such as fraying on the saran net. Serial 53729 53730 (Tomonori Asaine)
Maintenance information: 2024.6.29 Operation confirmed
Accessories: saran net
Main specifications: 2WAY2 speaker bass reflex bookshelf impedance 8Ω W294 x H375 x D235 mm 8.2 kg
* Black 3-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W395 x D395 x H595 mm, 320 mm from above shelves, 140 mm (actual measurement)
* 2-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W595 x D473 x H295 mm, 180 mm between shelves (actual measurement)
* Black 2-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W595 x D473 x H335 mm between shelves 215 mm (actual measurement)
The price has been drastically reduced. 2024/6/28 sales price 8,800 yen DENON small bookshelf speaker. Compact, orthodox, and calm design reproduces mild, highly textured sound quality with European tones in mind. The exterior has a feeling of use such as dullness. Serial 9064601786 9064601786 (Asaine Tomoho)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex type, anti-magnetic design, 6 ohms, frequency characteristics, 40 Hz to 40 kHz, crossover frequency, 3 kHz, efficiency: 86 dB/w/m, W182 x H296 x D237 mm, 5.2 kg
Spikes are missing. Popular 4-tier audio rack It has a sturdy construction with a metal frame. A space-saving design with the outer dimensions cut down to the last minute and the internal dimensions extended to the last minute. It brings out the performance of the device with tight and accurate sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 4 tier rack cast iron frame W540×D484×H935mm 41kg
Spikes are missing. Popular 5-tier audio rack It has a sturdy construction with a metal frame. The size has been cut down to the last minute to the outer dimensions, and the internal dimensions have been expanded to the last minute in a space-saving design. It brings out the performance of the device with tight and accurate sound quality. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 5-tier rack cast iron frame height adjustable (pitch 60 mm) W540 x H1175 x D483 mm approx. 48 kg
Maintained including 2ch/4ch heads. 4TR-4ch head unit JT-2044T included! A tape deck with a separate design that completely separates the tape transport and control amplifier. It uses a tape speed of 38 cm/s, has wide frequency characteristics and dynamic range, and achieves a high signal-to-noise ratio. A size 10 reel can be used. It is also compatible with the 4ch stereo that was popular at the time (another TAU-11 is required). The exterior has scratches, dullness, and corrosion appropriate to the model year.
Maintenance information: 2024.6.25 Maintained (mechanical partial cleaning, oil grease application, counter belt replacement. Transport part volume contact cleaning, switch contact disassembly cleaning. Replace 40 amplifier deterioration tongisters and adjust playback and recording levels. Mirror polishing treatment due to surface rust and wear steps on the recording and playback head. 4TR,2TR head maintenance completed. (Refill 3 missing attached pin cords, replace power cords due to deterioration)
Accessories: 4TR-4ch head unit JT-2044T, connection cable, power cable
Main specifications: 38 cm/s, 19 cm/s Compatible frequency characteristics: 38 cm/sec: 30 to 28,000 Hz 19 cm/sec: 40 to 20,000 Hz RTU-11: W460 × H411 × D246 mm 22.3 kg TAU-11: W460 × H141 × D246 mm 5.2 kg
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
The price has been reduced! 2024/6/28 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product from 20.5. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. *The positions of the SN.689 output terminals are reversed in red and black. *To connect to a speaker, connect the red output terminal to the positive side of the speaker and the black output terminal to the negative side of the speaker. Serial 689, 690 (Fujisawa Yukishi)
Maintenance information: 2024.6.28 Maintained (transistor/resistor replacement) 2024.4.4 Maintained (replacement of deteriorated parts. Solder deterioration area re-soldering treatment (solder removed/new solder after cleaning) DC voltage/DC offset voltage/idling current/other inspection adjustments. Short plug refill. The red and black positions of the 689 output terminals are reversed, but they cannot be replaced. (This is an upgraded product from NO.20.5L (6212/6213))
Accessories: copy of instruction manual, power cord, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The disposal price has been reduced! Member discounts are not applicable. 2024/6/25 sales price 478,000 yen Fostex GX series top model. An attractive speaker with a tweeter and midrange driver that uses a pure magnesium diaphragm. The detailed mid-high range with FOSTEX's sense of localization and granularity makes it possible to reproduce various music genres at a high level. Cloudy can be seen around the mid-woofer on one side. This is not a genuine Shortwire (Daiki Goto)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: original box, general purpose short wire
Main specifications: 3 way impedance 4 ohms output sound pressure level 90 dB frequency characteristics 40 Hz to 35 kHz dimensions W336 x H1,066 x D389 mm weight 56 kg
The price has been reduced. 2024/6/28 sales price 548,000 yen Equipped with the latest processor, it is compatible with DSD512/PCM768 playback. Faster processors and increased storage capacity improve signal processing performance and resampling flexibility. Furthermore, it is designed with plenty of room to support various future updates. The exterior has a feeling of use such as dullness. Serial 60231110-0832-1000660 (Asaine Tomoho)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: Power cable (general purpose)
Main Specifications: Compatible Formats DSD DSF (DSD) DIFF (DSD) DoP (DSD) PCM FLAC Apple Lossless (ALAC) WAV AIFF Compressed Audio MP3 MQA Compatible Streaming Service UPnP (OpenHome) Tidal Tidal Connect Qobuz Roon Ready Spotify Connect AirPlay TuneIn compatible sampling/bit rate PCM 44.1 kHz — 768 Hz 16 to 32 bit (stereo) DSD DSD64-512 (stereo) input 1000 Mbps RJ45 × 1 1000 Mbps SFP × 1 USB storage (single partition FAT32 NTFS exFAT) digital output USB DSD64-512 PCM 44.1 kHz — 768 kHz 16— 32bit OPTICAL DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit COAXIAL SPDIF DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit BNC SPDIF DSD64 (DoP) PCM 44.1kHz—192kHz 16-24bit AES/EBU DSD64 (DoP) PCM 44.1kHz—192kHz 16-24 bit dimensions W350 x D350 x H60.5 mm weight 6 kg
The price has been reduced. 2024/6/27 sales price 26,800 yen ※ It is cheap because it is in poor condition such as blows and dents. Speaker DEBUT line by Andrew Jones, an engineer who has worked on TAD and KEF speaker development. It is a clear, cohesive speaker with excellent phase characteristics. The exterior has conspicuous bumps, scratches, and creases on one side. There are holes in some sarangs. Serial 31921E001063 31921E001064 (Tomoho Asaine)
Maintenance information: 2024.6.27 sweep test good
Accessories: saran net
Main specifications: 44 to 20,000 Hz 6 ohms 87 dB W216 x H356 x D254 mm 6.5 kg
The price has been reduced. 2024/6/27 sales price 19,800 yen ※Currently sold. The 50th anniversary model of Diaton has an elegant birdseye maple glossy finish, and the way it sounds is European and smooth. There are stains on the exterior, dullness, abrasions, and the orange saran net (Tomonori Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, bass reflex, bookshelf type, anti-magnetic design, 13 cm cone type, 3 cm cone type, frequency band 50 Hz to 30 kHz impedance 6.3 Ω sound pressure level 87 dB crossover 5 kHz dimensions W189 x H305 x D198 mm weight 3.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 2,980,000 yen In addition to full maintenance including the exterior in 2020, the ATT has now been cleaned and inspected all parts, and further brushed up. The Georgian 4, which has an attractive elaborate horn configuration and beautiful furniture-like design, has arrived. It has a structure with a built-in crispy horn to create a unique sound with a rich sense of scale. There is a smell in the room (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (ATT cleaning/inspection of various parts) 2020.2.12 maintained ([main body] exterior cleaning/touch repair, resonance/distortion countermeasures, unit detachment [unit] single-sided woofer recorn, both driver disassembly and cleaning, TW one-sided disassembly and cleaning, TW single-side coil manufacturing exchange [network] TW capacitor and resistor replacement. *Some capacitors before replacement are difficult to remove, so they are left inside. Frequency characteristic measurement check (~ 42 kHz). Input/output waveform and balance check, sound output check.)
Accessories: none
Main specifications: 15WK, MT-30 (828HF), T35VHF, X336 (300/3500) approx. W860 x D660 x 1350 mm approx. 90 kg
The price has been drastically reduced. 2024/6/19 sales price 298,000 yen Maintenance completed! Genuine Electric AC 100V specification with cabinet The Macintosh 7000 series stereo power amplifier was announced to coincide with the advent of the CD era. The thick and gorgeous sound typical of the company is attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 maintenance completed (POWER, meter SW internal adhesion reinforcement, power stage Tr check, pattern re-soldering, CR check in the drawer board, connector cleaning, meter logo lamp, C replacement in the power supply board, each SW.VO l. Cleaning, offset, bias adjustment, operation check, panel folding correction.)
Accessories: instruction manual
Main specifications: 270W+270W power guard circuit equipped with frequency characteristics 20 to 20 kHz damping factor 30 W 443 x H240 x D400 mm 37.2 kg
Refined model equipped with LS-R0i high contact reliability rotary switch. In addition to the rotary switch, this line selector has carefully selected high-quality parts for connectors and internal wiring, and has a housing design that prevents external noise and vibration, so it can transmit the original sound as it is. The exterior is generally good (Tomonori Asae)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: none
Main specifications: RCA cable 3ch line selector W250 x H64 x D128 mm 2.4 kg
Equipped with an MM/MC position that LINTO did not have. It is a phono equalizer that can pursue optimal analog playback sounds. This model was raised to a standalone phono equalizer based on the sound quality level of URIKA, an equalizer dedicated to the LP12. You can enjoy clean and clear sound quality. The exterior has a feeling of use such as dullness. Serial 1410727 (Tomoho Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: Power cable (general purpose)
Main specifications: mm/MC compatible frequency band 2.5 to 40 kHz mm gain +44 dB/48 dB load resistance value 51/49/47/45 kΩ MC gain +54 dB/64 dB load resistance value LOW31/37/42/53/70/100/170 Ω High580/670/810/1 kΩ W381 x H80 x D355mm 4.4 kg
This disc stabilizer uses a “reversible structure” that allows both the front and back sides to be used. You can enjoy 2 types of sound quality depending on your preferences. High sound quality design with brass (special gloss finish) and damping rubber “Honeynight”. The exterior is dull, slightly scratched, etc. (Asaine Tomoho)
Accessories: none
Main specifications: H44 x W123 x D123 mm approx. 750 g
*Currently sold. A control amplifier with a straight-through design. It is an amplifier that focuses only on improving sound quality. There are also plenty of phono circuits, so beginners and advanced players can enjoy it. There is a feeling of use on the exterior, and paint peeling and small scratches are scattered on the top plate. Serial 157570 (Asaine Tomoho)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: none
Main specifications: PHONO (MM/MC) with MONO/STEREO switching W430 x D317 x H66 mm 5.2 kg
2-tier rack specification. The surface of the base plate is manufactured using a unique manufacturing method in which the surface is covered with a transparent acrylic plate, etc., and a fiber cloth is laid on a heat-resistant glass mold, epoxy resin for bonding is poured into an infrared oven for about 15 minutes, then an even thinner reinforced cloth is layered in three layers and dried naturally over about 12 hours. Carbon fiber itself exhibits excellent characteristics as a surface material. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae)
Accessories: none
Main specifications: stage inner dimensions W498xH182xD354mm outer dimensions W608xH 379xD465mm base SRX-1B (outer dimensions W608xH164xD465) for top placement SRX-1 (outer dimensions W608xH219x D465)
Maintained! A CD/SACD player compatible with many formats in the high-resolution era. It is a higher-level model that incorporates a lot of technology, and the built-in 32 bit/192 kHz DAC allows you to enjoy pure sound with a wide range during SACD playback. It is designed with high sound quality for CDs and compressed files, so it is recommended for those aiming for high sound quality in any format. The exterior is good with no noticeable scratches (Ryo Mizusaki)
Maintenance information: 2024.6.28 Maintained (check for abnormal noise when opening the tray. Loading part dismantling, grease replacement, lens and disc table cleaning. I played each disc and checked analog, USB, and S/PDIF sounds)
Accessories: remote control, instruction manual, power cord
Main specifications: 32 bit/192 kHz twin D/A converter jitter reduction IC twin power transformer damper tray equipped with CDR-R/RW (MP3 MPEG-4 AAC WMA), DVD-R/RW (DSD [DSD disk], MP3, MPEG-4, AAC, WMA), iPod, iPhone, and iPad compatible W435 x H130 x D329 mm weight 7.8 kg
Maintained! A famous instrument and first generation preamp. The coat is different from today's tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. The exterior has dullness and scratches. Serial C5W817 (Fujisawa Yukishi)
Maintenance information: 2024.6.28 Maintained (rotary switch, push switch disassembly contact cleaning. Contact grease application. Input selector, volume contact cleaning. Electrolytic capacitor replacement. Replaced because the resistant outer skin has deteriorated and cracked. The microphone terminal was damaged, so it was replaced. (Check the operation of each input/output)
Accessories: power cord
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
SPL (German recording professional equipment manufacturer) input/output balance terminal volume controller. By using an active circuit design, it is possible to avoid a decrease in linearity due to impedance changes that occur in passive circuits. The volume is continuously variable, so there is almost no imbalance between left and right, and it expresses a high level of sound quality. The exterior has a feeling of use such as dullness and small scratches. Serial 9020974 (Tomonori Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: Power cable (general purpose)
Main specifications: 1 XLR input/output system W215 x H80 x D220 mm 1.6 kg
The price has been reduced. 2024/6/2 sales price 59,800 yen Triode line vacuum tube premain developed with the novel concept of an amplifier for women. With its compact, exquisite size and high design, it can be used in a variety of situations. The exterior is good with only a small scratch and there is little feeling of use. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cable
Main specifications: output 3W+3W (8Ω) vacuum tubes 6BQ5 x 2, 12ax7 x 2, dimensions W190 x D180 x H135 mm weight 4.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
An unused dead stock item with a 10.0m pair of RCA cables has been opened for confirmation. SAEC name cable designed to be optimal for amplifiers with an output impedance of 15 ohms or less. If you are looking for a long RCA cable, don't miss it. The plug is discolored and there is stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, instruction manual, seal
Maintained! A control amplifier with improved multifunctionality and operability, inheriting the 8-band equalizer function similar to the C50. Digital transmission of SACD (DSD) signals is realized by providing a DIN digital input dedicated to Macintosh as the digital input. Equipped with 2 phono inputs (MM/MC), you can enjoy all music sources from analog records to high-resolution digital sound sources with Macintosh sound. There are no noticeable scratches on the exterior. Serial AEG 1511 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 maintained (backlight LED and resistor replacement, solder correction, audio/remote control reception check, interior and exterior cleaning)
Accessories: remote control, power cord
Main specifications: 4 analog unbalanced inputs, 3 analog balanced inputs, 1 phono input MM/MC, 3 digital input/optical digital systems, 2 coaxial digital systems, 1 USB system (up to 32 bit/384 kHz, DSD 11.2 MHz), 3 analog unbalanced outputs, 3 analog balanced output systems, 3 analog balanced output systems, W445 x H194 x D419 mm 12.5 kg
The price has been reduced. 2024/6/25 sales price 12,800 yen with box! Shure professional studio monitor headphones. Highly adjusted frequency characteristics reproduce rich bass, clear midrange, and extended treble range. Designed for professional engineers and musicians, perfect for precise listening and monitoring (Mamoru Hatano)
Maintenance information: 2024.6.25 sound output confirmed
Accessories: instruction manual, original box, conversion plug
Key Specifications: Weight 275 g
Maintained! This is an attractive premain with a good sound. It is equipped with a large toroidal transformer, so you can enjoy powerful bass reproduction unique to this age. The built-in MC boost transformer is of high quality, and you can listen to rich and deep record sounds. There are spots and small scratches on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.27 Maintained (output relay replacement, button installation, tape pin jack replacement, selector lamp replacement, switch disassembly, polishing grease application (tone, subsonic, muting, loudness, all input selectors, phono, reck-out), protector circuit transistor, capacitor replacement, resistor replacement, solder repair, each volume, switch cleaning, internal inspection, cleaning, operation confirm. The selector buttons and tape pins are free of charge because they are reused products. (For stabilization, it takes about 15 to 20 seconds for the relay to operate.)
Accessories: none
Main specifications: 150W+150W (8Ω) with 4 line inputs, phono MM/MC, W466 x H161 x D431 mm 17.5 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high voltage resistant non-polar capacitors and coils using low loss Orient Cores, and is a very easy to use network for those with 500 Hz crosses that are easy to use and are assembled with 175 or 375 drivers (Mizusaki Ryo)
Maintenance information: 2024.6.27 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Clean the terminal part and tighten it to reduce the sound on one side and the terminal is loose. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Comes with original box and hex wrench. Set of 4 banana plugs, silver and rhodium plated in phosphor bronze, these banana plugs have a beautiful direct plating design. You can also increase the resolution on your own system. There is dullness and small wounds (Tamura Eiji)
Accessories: original box, hex wrench
1.8 m PSE standard power cable “BLACK MAMBA” featured from the fastest snake on Earth. As the name suggests, the sound is supple and high speed. And while it has high resolution, it is designed to be fully flat and balanced to suppress peaks. The letters have disappeared on the sheath and there are some cracks on the coating (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
An A-shell oval needle characterized by the SPU's original direct sound. The firm, strong mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. The needle cover is partially chipped. Serial 412790 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
Based on the AT33PTG, this MC cartridge aims to reduce weight and pursue sound quality. Hard resin based on aluminum alloy suppresses resonance and reproduces clear sound. There are no bends. (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.4 mV suitable needle pressure 1.8 to 2.2 g (2.0 g standard) frequency band 15 to 50 kHz 10 Ω dead weight 6.9 g
An unopened 5.0 m pair of RCA cables has been opened for confirmation. SAEC high quality cable designed to be optimal with amplifier output impedances of 100 to 600 ohms. The plug is discolored, and the sheath is sticky due to aging (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box
RCA cable 10.0 m. SAEC name cable designed to be optimal with an output impedance of 100 to 600 ohms for pair amplifiers If you are looking for a long RCA cable, please check it out ※ There is rust on the terminals and stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, seal
It's a wide high range, and the low to medium range has such a sense of volume that you wouldn't think of it as a compact speaker. The speaker has a simple design and is easy to match with the interior. There are small scratches, dullness, etc. on the exterior (Asaine Tomoho)
Maintenance information: 2024.6.27 Operation confirmed (good sweep test)
Accessories: saran net
Main specifications: impedance 6 ohms maximum allowable input: 80 W (JEITA) 120 W (PEAK) frequency band 45 Hz to 60 kHz crossover frequency 2 kHz 6 Ω size W180 x H270 x D165 weight 3.7 kg
The price has been reduced. 2024/6/13 sales price 29,800 yen ※6 month warranty. This is the DCD-100 thin CD player that is the best match for the DRA-100 network receiver in the DENON design series. Full digital processing is possible by combining it with the DRA-100. Of course, it's attractive enough as a standalone CD player, and it's a high cost performance machine that allows you to listen to smooth sound without habit (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: slot-in CD mechanism 384 kHz/32 bit compatible D/A converter compatible with MP3 and WMA data disc playback size: W280 ✕ H71 ✕ D305 mm 4.2 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/17 sales price 49,800 yen tall tower audio rack. Made of powder-coated, scratch-resistant metal and tempered safety glass made in Italy. It has rounded glass front shelves for a custom made look. It includes a management system to hide power cords and interconnect cables. The exterior has a feeling of use such as dullness and small scratches. *Shipping costs will be estimated separately (Asaine Tomoho)
Accessories: none
Main specifications: shelf glass plate thickness 6 mm load capacity 23 kg size 635 x 610 x 1,550 mm weight 46 kg
The disposal price has been reduced! (Member price not applicable) 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/27 sales price 5,000 yen. *Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
A thick, highly rigid heavyweight shell prepared by Orthophone for cartridges other than the SPU series. It is an easy-to-use headshell with a flat cartridge ground surface and excellent adhesion (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
This is Wilson Benesch's straight arm. Carbon fiber with excellent vibration damping properties is used for the pipe. Coupled with the one-point design, it is possible to achieve sound with extremely no stagnation, precise, and rich in spatial reproduction. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: arm cable
Main specifications: static balance type, effective length 280 mm, compatible cartridge weight 5 to 16 g
1.8 m PSE standard power cable “BLACK MAMBA” featured from the fastest snake on Earth. As the name suggests, the sound is supple and high speed. And while it has high resolution, it is designed to be fully flat and balanced to suppress peaks. The letters have disappeared on the sheath and there are some cracks on the coating (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Due to the sharp followability of the knife edge, the clear and cohesive sound quality still boasts high performance today. The exterior is slightly oxidized and dull. Serial 07031R (Satoshi Yonejima)
Maintenance information: 2024.6.26 operation confirmed
Accessories: connection cable
Main specifications: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g