RCA cable 5.0 m pair is a basic and affordable RCA cable with a titanium-containing sheath boasting low loss and high Sn and the largest cross-sectional area in its class (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
An RCA cable uses 1.5 m pair silver-plated copper wire to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. There are stains and writing on the sheath (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
Speaker cable 2.0m pair end A Sonotone speaker cable developed with untreated home theaters in mind. Adopts a full-scale multi-4-core structure with a 2-type hybrid 2-layer multi-strand construction finish. On the exterior, the characters in part 1 have disappeared and there is dullness (Yonejima Satoshi)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: No accessories
Maintained in April 2023! Genuine RF with cabinet AGI's popular 511 preamp. The speedy and straight sound expression goes well with classical jazz, rock, etc., and also matches well with vintage speakers. The power is turned on when the outlet is inserted, but this is the original specification*The front switch is for a service outlet. There are bruises on the exterior (Yonejima Satoshi)
Maintenance information: 2023.4.18 Maintained (each SW, VOL cleaning (main balance VOL cannot be cleaned because it is sealed) pin soldering treatment on the RCA hot side. There are no current issues with C, R, and TR on the board. Operation check)
Accessories: none
Main specifications: 1 phono input system (MM compatible), 2 line input systems, frequency characteristics 20 to 20 kHz, W430 x H165 x D285 mm, approx. 8.7 kg
Speaker cable 2.8 m pair end unprocessed OFHC 4 Gage (0.16 mm x 105) is a cable that can be expressed more delicately than other Belden cables. There is writing on the sheath (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
This is an acrylic RECORD STABILIZER with a retro design. It also creates a glamorous appearance (Murakoshi Yoichi)
Accessories: none
Main specifications: height 50 mm diameter 70 mm weight 229 g (actual measurement)
Power cable, 1.5m PSE standard product, uses Wattgate-5266i+320i as a plug for the power cable made by A2D in the US, making it a model highly evaluated by studio engineers. The sheath is rubbed and there is a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: none
Phono cable is sold as a 1.2m pair of phono cables with SME terminal specifications and no ground wire. VH-D501 It seems to be the same type as the one that came with the SME tonearm. Originally, it was a model with a reputation as a microphone cable for professional recording. There is friction on the sheath, letters disappear, and there is dullness on the plug (Kanai Hidetsugu)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: none
Speaker cable A high quality speaker cable using a 4.0 m pair crimped with a metal tube on one side and an untreated PC Triple C conductor on one side. There is dullness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: none
Maintained! A pure Class A premain amplifier from the early days of the musical Fidelity. The top plate heats up due to the high calorific value, but it is a famous machine that still boasts high popularity for its elastic, bouncy mid-low range, and smooth, thick mid-high range sounds. The beauty of the simple design is also attractive. There are small scratches and scratch marks on the exterior. Serial 11418 (Tamura Eiji)
Maintenance Information: 2024.7.3 Maintained (input selector switch contact cleaning. The TAPR and MM/MC changeover push switches were replaced due to poor contact. 17 capacitors were replaced due to differences in electrolyte condenser fluid leak levels. (Each input/output operation check is OK)
Accessories: instruction manual
Main specifications: pure A grade 20W+20W (8Ω) W408 x H60 x D249 mm 5.5 kg
Maintained! The original MC275 is the pinnacle of Macintosh tube amplifiers. All GEC output tubes! A famous historical machine that intensely entertains music with its velvety luster and strong tone. Instead of resolution or wide range, the rich sound that makes you feel a sense of life is truly the Macintosh sound itself. Since the lettering has disappeared, the sticker is printed, and a feeling of use can be seen on the exterior, such as dullness, rust, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.3 maintenance completed (4 block capacitors 100/30 μF defect and deterioration replacement · 12 μF deterioration replacement · 6 oil capacitors 0.22 μF other deterioration replacement · thermistor replacement 2 · TWIN volume gang error replacement 2 pieces · resistance 2W and 1W deterioration replacement · 6 additional lettering treatment · vacuum tube socket and RCA jack caulking repair. Operation checked: 72 to 98 W with rated output AC 100 to 117 V, measured at SP: 8 ohms)
Accessories: none
Main specifications: 75W+75W (in stereo) 150W (in mono) vacuum tube 12BH7 x 2, 12AX7 x 1, KT88 x 4, 12AU7 x 2, 12AZ7 x 2 W311 x H203 x D438 mm 30.4 kg
Balance cable 1.0m pair, new-generation minimum value guarantee, stress-free 7N copper conductor & polyolefin sheath, model with fine texture, and a very careful sound. Recommended for those who want to listen closely to classical music. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Maintained! JBL masterpiece 375. It is built into a number of famous machines to create a rich sound. In particular, the sense of energy and density in the middle due to the rolled edge is excellent, and the vocals are sensual. The treble that stretches without impacting your ears is also attractive (Daiki Goto)
Maintenance information: 2024.7.2 maintained (diaphragm disconnection adjustment, pad dampener and mounting screw rust replacement, distribution terminal contact part cleaning, terminal dirt cleaning, insulating bushing replacement, diaphragm stain cleaning DCR (21067/8.3 ohm diaphragm scratch), DCR (24539/8.3 ohm diaphragm scratch not))
Accessories: original box
Main specifications: 2 inch driver frequency band 500 Hz to 10 kHz crossover 500 Hz or higher sound pressure level 108 dB impedance 16 ohms diameter 180 x depth 130 mm weight 11.8 kg/book
Speaker cable uses a 1.5m pair of untreated 6N high-purity copper thick aluminum wrap shields, and is a speaker cable with an excellent balance between the warmth of the sound of 6N copper and elongation in the high frequency range due to the silver coating. There is a slight stickiness. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
This model features an enclosure made of solid mahogany. Luxurious designs with particular attention to materials, such as woofers that use Kurt Müller cones and tweeters that use double feather silk soft domes. It has high musicality and reproduces sound quality that is natural and easy to hear. Externally, there is a scratch on the top plate. Serial 11103379, 06102975 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual, saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, anti-magnetic type, W200 x H343 x D263 mm, weight 8.0 kg/book
Add a picture of the manual
A floor-type speaker with an authentic 3-way configuration with all-round appeal, from pure audio to theaters. The wide range playback has a sense of volume, and there is an exhilarating feeling that you can drop out the mids and highs that are particularly calm and easy to hear. The exterior is dull serial NO.I127588 I127593 (Watanabe Yuji)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual saran net jumper plate
Main specifications: 3-way bass reflex type (non-magnetic) playback frequency band 45 Hz to 50 kHz impedance 6 ohms sound pressure level 89 dB W354 x H1,012 x D374 mm weight 25.0 kg
Maintained, new dust cover created, SHURE M44G included, S-shaped arm. An auto lift-up player with an automatic lift-up function when playback is over. The cabinet has a sense of luxury, and the sound quality is authentic, with a thickness unique to that time. The exterior has dullness, small scratches, etc., and a feeling of use can be seen. Serial 1512931 (Tomonori Asaine)
Maintenance information: 2024.7.2 maintained (PU code, 2 CDS for auto lift replaced. Arm disassembly cleaning, sound test. (Create a new dust cover)
Accessories: shell MG-10, cartridge SHURE M44G, copy of instruction manual
Main specifications: tone arm with static balance type electronic damping mechanism inner rotor type high torque AC servo motor needle pressure variable range 0 to 3 g W490 x H219 x 410 mm 15 kg
This model uses PCOCC material for the internal wiring of the AT33 series, a standard model of domestic MC cartridges along with the DL-103, and has acquired even greater transparency. The wide range and clear contours are also the appeal of the 33 series. The exterior has a feeling of use such as dullness and dirt on the body (Sasaki Shota)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: needle cover
Main specifications: MC type playback frequency band 15 to 50,000 Hz output 0.4 mV needle pressure 1.2 to 1.8 g impedance 17 ohms dead weight 6.8 g
The price has been drastically reduced. 2024/7/1 sales price 558,000 yen Mark Levinson's 5ch power amplifier. From input to output, it is a power amplifier with a simple and reasonable internal configuration that combines a fully balanced mono power amplifier circuit composed of the shortest condensed signal path and a powerful power supply circuit. There are some scratches on the front panel top plate surface and the heat dissipation fins on the top plate side, and there are some cracks in the speaker terminal cover (Kojima Yosuke)
Maintenance information: 2024.7.1 operation confirmed
Accessories: instruction manual, power cable
Main specifications: output 200W (8Ω) x 5 input terminals RCA-XLR x 5 (input changeover switch type for each channel) W451 x H194 x D504 mm 40.8 kg
The price has been reduced. 2024/7/1 sales price 118,000 yen Edge softened! Diaton's classic 1000 series has a reputation for its sense of cohesion throughout the entire band. Boron is used for the scoker and tweeter, and the transparency of medium and treble sounds is outstanding. The sparkling, glossy tone goes great with vocals. There are some threads on the exterior. Serial 17875, 17880 (Fujisawa Yukishi)
Maintenance Information: 2023.12.13 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed impedance 6.3 ohms, sound pressure level 90 dB, W360 x H690 x D341 mm, weight 29 kg/book
※6 month warranty Adopts Denon's traditional AL32 processing CD player. Sound full of life was achieved by adopting high-quality parts that greatly surpassed the previous 755 series, such as adopting the company's exclusive custom capacitors incorporating SX1 technology. Serial BLH271911016 (Hiura Katsuji)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: remote control
Main specifications: analog output RCA1 system, digital optical 1 system W434 x H107 x D275 mm 4.3 kg
It is an attractive acoustic panel with a design that combines functionality and interior features. It can be expected to have the effect of removing excessive reflections and sound turbidity in the room. The exterior is dirty on the reverse side, and the logo sticker is peeling off (Ryo Mizusaki)
Accessories: none
Main specifications: W250×H250×D33mm, weight 400g/sheet
Pure Class A stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. In addition to the sense of power and the power of the bass, I still feel attractive in the mid-high range, which has contours and stretches. There are scratches, dirt, and front threads on the top plate (Daiki Goto)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
※Surface deterioration is noticeable, so it is inexpensive. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. The rigidity is high and low frequency tightness can be expected. The exterior has oxidation and dullness on the metal surface (Satoshi Yonejima)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: No accessories
Main specifications: Die-cast aluminum, self-weight 10.6 g
Set of 6 multi-use carbon pipes The extra-thick CFRP pipe with a thickness of 3 mm quickly treats unnecessary vibrations. It can also be used with the company's STB-MSX stabilizer. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: outer diameter: 20 mm, inner diameter: 14 mm, wall thickness: 3 mm, height: 17 mm (pipe shape), load capacity: 500 kg/piece
Speaker cable 1.9 m pair ends untreated. A new conductor made by mixing high-purity 6NCu with high-performance pure copper HIFC, tin-coated OFC, and high-purity oxygen-free copper. The dynamic sound that cannot be imagined with a thin exterior is attractive (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Speaker cable 2.0m pair ends untreated. It is a cross insulated structure with an air layer called CIS as a damper, and the sound quality is flat and natural without any habit. I think you can use it regardless of genre. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 Maintained (end sensor circuit tantalum capacitor replacement, end detection operation check)
2024.6.9 Maintained (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, adapter, oil case, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
*The volume cannot be replaced with a replacement product, and the volume cannot be changed with the remote control. Maintained! A mid-range model in the ES series, a masterpiece amplifier from the heyday of audio. While the sound is crisp and well-contoured, the balance that doesn't feel tight is appealing. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 maintenance completed (speaker relay replacement, 16 other resistance deterioration locations replaced, other mute SW, source direct SW, INPUT selector, direct SW, Cartrich LOAD, RECOUT, SW disassembly contact polishing cleaning grease application, A board B board solder poor contact repair, DC bias DC balance adjustment, DC bias DC balance adjustment, volume VR 9 o'clock position replacement for Gari Then the volume cannot be changed. (The current situation is limited due to the weight of BAL and Tone volumes, grease injection treatment for shafts, etc., and no parts and cannot be replaced)
Accessories: remote control, instruction manual
Main specifications: 105W+105W (8Ω) W470 × H165 × D435 mm 21.2 kg
Digital cable, 1.0 m, Toslink (square at both ends) type, 0.7 mm, low loss quartz glass. It is a genuine Accuphase optical digital cable that is not often sold on the market. There are seal marks on the sheath (Kojima Yosuke)
Accessories: none
Digital cable, 1.0 m, Toslink (square at both ends) type, 0.7 mm, low loss quartz glass. It is a genuine Accuphase optical digital cable that is not often sold on the market. There are seal marks on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable 6.0 m pair A classic BELDEN speaker cable nicknamed “sea snake” with an untreated end. The cable braided in orange and black is impressive, and it features a solid sound (Kojima Yosuke)
Accessories: none
Speaker cable 2.0m pair with untreated+soldered ends, sold out type using the company's highest-grade cable material. Recommended for those who want to improve low frequency tightness. An XLO tube is wrapped around the tip ※Please be careful when pulling as the cable is stiff (Kojima Yosuke)
Accessories: none
Improved model, successor to the 1.8m JPA-10000 power cable. The sheath is significantly thinner than the predecessor, improving maneuverability. In addition to the individuality of the sound of the predecessor, I have the impression that the strength of the low frequencies has increased (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Everything from the exterior to the internal unit and network was fully maintained in January 2023! Comes with a dedicated trolley and a reflector on the back. Vitavox, which developed mainly commercial equipment for theaters in England, announced in 1947, the company's first high-end corner speaker system for home use. The gentle tone of the horn is full of unrivaled appeal. The elegant design, which can be said to be art suitable for the finest products, is also excellent (Daiki Goto)
Maintenance information: 2023.1.28 Maintained (exterior repair/cleaning, black paint on the back. Woofer maintenance (edge crack repair, magnetic circuit rust removal/gap cleaning/center adjustment.
Driver maintenance (magnetic circuit gap cleaning/center adjustment) network maintenance (terminal block cracks are bonded and reinforced with epoxy. Tuck in some of the terminal screws that are too long. Brush the ATT contacts and clean them. Characteristics were measured, and the results were good, and the original capacitors were continuously used. (Check the sound output)
Accessories: Self-made special trolley, self-made reflector
Main specifications: driver S-2 horn CN481 woofer AK-157 network CN458 W1120 x H1350 x D770 mm (actual measurement)
Tigron's 1.5m Peer Notric XLR terminal combines Tigron's technology with the imagination of Sunshine. High-class specification with Tiglon's highest grade cable treatment “H.S.E. Grande Treatment”. It is also very soft and smooth to the touch, making it easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Tigron's 1.5m Peer Notric XLR terminal combines Tigron's technology with the imagination of Sunshine. High-class specification with Tiglon's highest grade cable treatment “H.S.E. Grande Treatment”. It is also very soft and smooth to the touch, making it easy to handle. (FUJISAWA KOSHI)
Maintenance information: 2024.6.29 continuity confirmed
Accessories: original box
Maintained! A shell round needle model. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. The exterior has dullness etc. due to use over time (Asaine Tomo)
Maintenance information: 2024.6.28 Maintained (pedestal installation, damper adjustment)
Accessories: original box needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Maintained! A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.28 Maintained (vibration system replacement shell replacement)
Accessories: original box
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
The disposal price has been reduced! Member prices are not applicable. 2024/6/28 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product from 20.5. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. *The positions of the SN.689 output terminals are reversed in red and black. *To connect to a speaker, connect the red output terminal to the positive side of the speaker and the black output terminal to the negative side of the speaker. Serial 689, 690 (Fujisawa Yukishi)
Maintenance information: 2024.6.28 Maintained (transistor/resistor replacement) 2024.4.4 Maintained (replacement of deteriorated parts. Solder deterioration area re-soldering treatment (solder removed/new solder after cleaning) DC voltage/DC offset voltage/idling current/other inspection adjustments. Short plug refill. The red and black positions of the 689 output terminals are reversed, but they cannot be replaced. (This is an upgraded product from NO.20.5L (6212/6213))
Accessories: copy of instruction manual, power cord, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
Digital cable, 1.0m, BNC terminal specification, fully isolated, can be used not only as a 3-layer shielded digital cable, but also as a clock cable. There is dullness around the plug, rubbing against the sheath, and dirt (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
1.8 m PSE standard power cable “BLACK MAMBA” featured from the fastest snake on Earth. As the name suggests, the sound is supple and high speed. And while it has high resolution, it is designed to be fully flat and balanced to suppress peaks. The letters have disappeared on the sheath and there are some cracks on the coating (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The price has been reduced! 2024/6/27 sales price 79,800 yen A shell oval needle features the original direct sound of the SPU. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. The needle cover is partially chipped. Serial 412790 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
The price has been reduced. 2024/6/27 sales price 24,800 yen For the first time in this class, silver wire and a solid oval needle were used as power generation coils. Also, the combination of the Boron cantilever used only in higher-level models and the Shibata needle stylus tip is excellent, and by combining this with an Aucurum (gold-plated 6N high purity conductor) power generation coil, the sound is one rank higher. The sound creation, which has a wide range yet is also moist, is truly amazing. The cantilever is leaning towards the right. Also, there is a slight crack on the back (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV frequency band 20 Hz to 25,000 Hz needle pressure 2.3 g dead weight 9 g impedance 20 ohms
This model uses 4 types of wire, mainly untreated high-purity 6N copper at the 2.5 m end of the speaker cable. Of course, with the starcard system, where 2 of the 4 cores are twisted and connected to each other, it is also possible to use each of the 4 cores as bi-wiring by dividing them into high and low frequencies (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/6/29 sales price 298,000 yen Maintained including 2ch/4ch heads. 4TR-4ch head unit JT-2044T included! A tape deck with a separate design that completely separates the tape transport and control amplifier. It uses a tape speed of 38 cm/s, has wide frequency characteristics and dynamic range, and achieves a high signal-to-noise ratio. A size 10 reel can be used. It is also compatible with the 4ch stereo that was popular at the time (another TAU-11 is required). The exterior has scratches, dullness, and corrosion appropriate to the model year.
Maintenance information: 2024.6.25 Maintained (mechanical partial cleaning, oil grease application, counter belt replacement. Transport part volume contact cleaning, switch contact disassembly cleaning. Replace 40 amplifier deterioration tongisters and adjust playback and recording levels. Mirror polishing treatment due to surface rust and wear steps on the recording and playback head. 4TR,2TR head maintenance completed. (Refill 3 missing attached pin cords, replace power cords due to deterioration)
Accessories: 4TR-4ch head unit JT-2044T, connection cable, power cable
Main specifications: 38 cm/s, 19 cm/s compatible frequency characteristics: 38 cm/sec: 30 to 28,000 Hz 19 cm/sec: 40 to 20,000 Hz RTU-11: W460 × H411 × D246 mm 22.3 kg TAU-11: W460 × H141 × D246 mm 5.2 kg
The 1.3 m pair Art Link Series RCA cable uses a PCCC and Hi-OFC hybrid material, contains titanium that is resistant to vibrations and external noise, and uses a sheath and rheostomer insulator as the center conductor (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
The price has been reduced. 2024/6/26 sales price 79,800 yen DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Exterior, the saran net is extremely hard to attach and detach, so there are cracks in the dowel hole in one place, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.26 Operation confirmed
Accessories: instruction manual, saran net, jumper, spike, spike holder
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg