Maintained by the manufacturer! A new dust cover has been created and the exterior has been repaired. Furthermore, the SHURE M44G is included so you can use it right away. The ease of setting is also attractive, but after all, the repeat function and location mechanism that moves the tone arm to the desired position to perform are convenient, so you can easily enjoy analog. There is some paint peeling near the power switch on the exterior (Sasaki Shota)
Maintenance information: Maintained by 2024.7.7 Denon service (arm disassembly repair CDS replacement lead in, out adjustment. (Others, inspection of each part, sound test)
Accessories: copy of the manual, cartridge (SHURE M44G)
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
It is a model commemorating friendship with WADIA in the United States, and WADIA is in charge of the D/A conversion section and analog board. It has a unique character that is different from other domestic CD players, and the high frequencies extend clearly, and you can hear clear sounds, and I feel that the sound output is very bright. The exterior has dents and line scratches on the front side of the top plate, and there is a feeling of use such as deterioration visible inside the tray (Mizusaki Ryo)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, power cord, spike holder
Main specifications: digital input/output terminal, coaxial RCA, 1 optical TOS system, 1 analog output terminal, 1 RCA, XLR system each, equipped with a VRDS (CMK3) mechanism W465 x H157 x D390 mm 14.5 kg
Belt-drive CD player. Playback is possible with smooth and stable disc rotation created by the inertia of the CD stabilizer. You can check the condition of the belt and replace it yourself. It is also equipped with a digital input and headphone jack. The USB input is compatible with PCM32 bit/384 kHz and DSD128/5.6 MHz DOP playback of high-resolution sound sources played back on a computer. There is a scratch on the top of the front panel on the exterior (Ryo Mizusaki)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, instruction manual, power cord, stabilizer, original box
Main specifications: input COAXIAL (SPDIF 24 bit/32 to 192 kHz), TOS (SPDIF 24 bit/32 to 192 kHz), USB 2.0 (PCM 32 bit/32 to 384 kHz, DSD64/2.8224 to DSD128/5.6448 MHz) output COAXIAL, TOS analog output balanced XLR, unbalanced RCA size W435 x H109 x D335 mm approx. 8.6 kg (including CD stabilizer)
Manufacturer maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Mizusaki Ryo)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, resistance (80 ohm) defect replacement, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! The diaphragm has been replaced with a D16R2421. Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-to-high sound are attractive for slight input
Maintenance information: 2024.7.7 maintained (diaphragm installation adjustment, pad dampener and mounting screw rust replacement, material dirt cleaning, insulation bushing replacement, diaphragm dirt cleaning, diaphragm stain cleaning, diaphragm stain cleaning, diaphragm is likely to be D16R2421, DCR (33380/7.0 ohm diaphragm scratch) DCR (35790/7.0 ohm diaphragm scratch))
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior such as line damage and rust (Ryo Mizusaki)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior has a broken frame on one side, and there is a feeling of use such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screw rust and insulation bushing deterioration replacement, terminal cleaning 155686 GAIN CON SW defect replacement, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
*Currently sold. JBL UREI professional power amplifier. Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. The exterior is generally dull, and there is a feeling of use such as scratches (Mizusaki Ryo)
Maintenance information: 2024.7.7 operation confirmed
Accessories: phone plug for conversion
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
Audiocraft lightweight shell with 2 lock pins. The highly rigid and solid sound is attractive (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping 8g
※This is a parallel import product. It is a LINN core player directly related to the CD12, where you can enjoy a unique sound with a vintage sound atmosphere. The compact housing and design are typical of the United Kingdom, and the sound is thick in the mid-range, and the high frequencies are not too tough, and you can fully immerse yourself in the music with an exquisite balance. Externally, there are thin line scratches on the top plate. Serial 715027 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 96 kHz/24 bit D/A equipped HDCD compatible analog output/unbalanced 2 systems (RCA x 2) balanced 1 system (XLR x 1) digital output/coaxial/1 system (BNC x 1) · 1 system (TOS x 1) AES/EBU · 1 system (XLR x 1) digital input/no attached functions/voice variable output, left and right balance adjustment, mute W320 x H80 x D326 mm 4.1 kg
It is an aluminum press shell that uses Audiocraft's Perfect Lock pin. The exterior has a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.7.7 continuity confirmed
Accessories: none
Main specifications: dead weight 12g
Maintained! This is a masterpiece preamp from the middle of ML, which has a one-board configuration, and uses a “dual mono construction” with excellent uniformity of balance between left and right, with 2 mono circuits arranged on the left and right targets. It is a preamplifier that has an excellent sound design with an exquisite sense of balance in each part, such as the mid-low range with a core, accurate sound image reproduction, and glossy mid-high frequencies, etc., and the level of music rises dramatically just by introducing it. There are dirt scratches on the exterior. Serial 3157/2494 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 Maintained (replacement of deteriorated parts. Board cleaning/repair. Since the balance switch is not available, disassemble and clean. STEREO ↔ MONO switch installation correction. DC voltage/DC offset voltage/other adjustments)
Accessories: power cord, connection cord, Remo to RCA conversion plug x 2
Main specifications: Dual mono configuration, 4 system input, 2 system tape, 2 system pre-out (1 system Remo, 1 system balance), body dimensions W444 x H78 x D333 mm, weight 4.5 kg, power supply unit dimensions W193 x H78 x D333 mm, weight 3.6 kg
Maintained by the manufacturer in November 2021! The last limited version in the S10 series. The well-built structure, which weighs 29 kg, is directly linked to the sound. It is a powerful machine that has an excellent driving feel and can easily drive even large woofers. Compared to recent modern models with a thin mid-low range, the driving power with a clear sense of energy is attractive. There are scuffs and scratches on the exterior. Serial 2031500557 (Fujisawa Yukishi)
Maintenance information: 2021.11.19 manufacturer maintained (MM/MC changeover switch, protection circuit relay RL401,2 replaced. Input selector switch disassembly, contact polishing cleaning. Tone switch contact reviver treatment, printed circuit board solder crack soldering correction, bias current adjustment, sound output test, and other inspections)
Accessories: power cord
Main specifications: 100W+100W UHC single push circuit high rigidity chassis W434 × H181 × D485 mm 29 kg
Maintained by the manufacturer in March 2023! This model was developed by introducing technology from the conventional PM-11S3. It is a premain amplifier with a high degree of perfection, such as a smooth high frequency with high SN, a low range with a rich sense of volume, and a sound field space with an excellent sense of depth. As for the exterior, there are some scratches on the top plate. Serial 15001339000002 (Fujisawa Yukishi)
Maintenance information: 2023.3.13 Maintained by the manufacturer (replacement of defective transistors, other inspections and adjustments)
Accessories: remote control, instruction manual, power cord
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) Phono input 1 system (MM/MC) line input 3 systems W440 x H123 x 457 mm 18.5 kg
※Comes with a dedicated stand. You can enjoy the smooth, beautiful sound unique to British BBC monitors. As expected, there is plenty of noise regardless of genre, from jazz and classical music to rock and pop music. It captivates with just the right amount of box noise and a design that has guests. There are some scratches on the exterior. Serial 4732 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: instruction manual, stand, original box (speaker only)
Main specifications: 2-way 2-speaker bass reflex system unit, 20 cm cone type for low range, 2.5 cm dome type playback frequency band 43 Hz to 20 kHz output sound pressure level 86 dB impedance 8 Ω maximum input 150 W W271 x H520 x D315 mm 12.5 kg
Maintained! Original Model 7. You can enjoy a glossy mid to high range sound with a high sense of transparency and a thick, exquisite balance. It's a model that has been over half a century since it went on sale for analog fans, but it's still one they admire. The lustrous, indescribable tone is an appeal that cannot be enjoyed on modern devices. There is no cabinet, and there are general-purpose rubber feet. Serial 7-15815 (Takasaki Atsushi)
Maintenance information: 2024.7.6 maintenance (main volume disassembly, cleaning and repair, addition of rubber feet, rubber pads for subchassis, block capacitors, short pin replacement. Vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2015.4.8 maintenance (OIL.C, resistor (1/2W), electrolytic capacitor 250 μF and 100 μF replacement. Subchassis rubber pad replacement, side pad addition, RCA jack and VT socket re-caulking repair)
Accessories: none
Main specifications: tubular control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, 7.5 kg
※The remote control is missing, and there are many scratches on the front panel, etc., so it is inexpensive. Uses a “power MOS FET,” which has a reputation for sound quality and reliability. Sound quality that claims to be an extrusion not unique to the company with a high degree of perfection. The driving power is sufficient even for standalone stereo operation, but it can be upgraded to a majestic sound with a bridge connection. In addition to the exterior, the black ring on the SP terminal is partially missing, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.5 operation confirmed
Accessories: power cable
Main specifications: stereo power amplifier pure A grade operation rated output 60 W+60 W (8 Ω), 480 w/ch 1 Ω load in stereo specification ~ 60 w/ch 8 Ω load input RCA1, XLR1 speaker output 2 system damping factor 800 impedance 2 to 16 Ω (when stereo specification) S/N ratio 127 dB (GAIN switch -12 dB) W465 × H238 × D515 mm 44.3 kg
* The specifications of the baffles around the unit have been changed to urethane, have deteriorated, and are inexpensive, and are currently being sold. AR tall boy speaker. By adopting a build-in mirror image subwoofer, you can enjoy a slim yet spectacular sense of scale. In addition to the exterior, as described above, a feeling of use can be seen on the unit, such as bond marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.5 operation confirmed
Accessories: saran net, general purpose jumper
Main specifications: 3 way 4 speakers, 97 dB, 8 ohms, frequency characteristics, 30 Hz to 20 kHz, crossover frequency 120 Hz, 2.5 kHz, W265 x H1,093 x D478 mm, 33.3 kg
The degree is good! Lots of accessories! Grace wood-framed tone arm The material is an arm with high processing accuracy that looks like Grace using tender teak wood. The support method is an oil dump with one-point support, and the head shell part is a replacement method with a special shell. It is for cartridges with relatively light needle pressure. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.7 continuity confirmed
Accessories: instruction manual, connection cord, original box, cartridge mounting plate, mounting template, stop screw
Main specifications: static balance, one-point support, oil dump type, effective length 237 mm, compatible cartridge 4 to 13 g, needle pressure range 0 to 3 g
Comes with a rare original box. It is a famous unit for guitar amplifiers. The rich, clean mid-high range unique to Alnico is attractive. It also responds quickly and has a warm texture. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: original box
Main Specifications: Alnico Magnet 8 inch 8 Ohm 92.5 dB 25W W213 x D59 mm 2 kg
Although it is a B&W entry model, this model has been a long-time seller due to its high cost performance. It plays a wide variety of music genres with an advanced sense of transparency in the mid to high frequencies and a good sound with plenty of sound. A feeling of use can be seen on the exterior, small scratches on the edge, and slight dirt on the top plate and sides (Kobayashi Hitoshi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: saran net, jumper, bass reflex sponge
Main specifications: 2 way 2 speaker bass reflex type 8 ohm output sound pressure level 84 dB W165 x H280 x D276 mm 6.7 kg
It is a ferrite type commonly known as a ferrite-type gun used in the company's SB-65. While the sound quality is soft and straightforward, it also has just the right amount of power, so I think it's suitable for jazz. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: 20cm full range 8Ω screw pitch (diagonal) 194 mm (actual measurement)
TAOC's current speaker stand. Cast iron powder is encapsulated inside, and the top plate part has a double iron plate structure, and it is a model where TAOC's vibration damping technology is fully demonstrated. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: wrenches, screws, spikes, instruction manual
Main specifications: Top plate dimensions W160 x D250 mm Bottom plate dimensions W250 x D350 mm H600 mm (including spikes) Weight 11 kg
A micro record cleaner with a pair cleaner system that removes dirt with a clear brush and wipes clean with a disc cleaner. It is an unusually good product with a rare original box (Murakoshi Yoichi)
Accessories: original box, spare disc cleaner (2 pieces), instruction manual, brush
Main specifications: pipe arm total length 215 mm center shaft adjustment range 36 to 70 mm
Large insulator of unknown manufacturer with a diameter of 60 mm and a height of 20 mm. There are holes for screws, so it seems that it can be diverted to amplifiers, players, etc. The finish and construction are solid. There are small wounds and dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 60mm, height 20mm 425g/piece
MICRO arm-type record cleaner. Simply set it on the player and automatically removes dust, making it effective for the maintenance and longevity of records and needles. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Accessories: none
Main Specifications: Total Arm Length: 220mm Maximum Effective Length: 190mm Shortest: 150mm Height: Highest: 62mm Lowest: 44mm
This is the first model in Sony's ES series to use an optical system fixing system. The setting using stabilizers is also unique. The sound image is clear, and the sharpness is typical of Sony with a focus. It is a player from the heyday of CDs, where you can enjoy more satisfaction than the price. The exterior has small scratches and a feeling of use such as dullness. Serial 20217 (Tomoho Asaine)
Maintenance information: 2024.7.7 operation confirmed
Accessories: Stablizer remote control instruction manual
Main specifications: CD player, optical fixed pickup, 2 analog outputs (FIXED/VARIABLE), 1 digital system (optical), W430 x H125 x D370 mm, 13.5 kg
Bookshelf Speaker Floor Stand It is designed for small speakers such as the 705 and CM5, and is a stylish design that matches other speakers of similar size. The exterior is dull and has small scratches (Tomoho Asaine)
Accessories: mounting screws
Main specifications: external dimensions W275 x H600 x D365 mm top plate 160 x 200 mm bottom plate 275 x 365 mm 10 kg
This is an orthophone wall socket and baseboard plate set. A highly textured product made of natural oak wood. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original box 60mm long screws x 2
Main specifications: natural wood, oak wood, thickness 20 mm, size 150 x 98 mm, weight 170 g
This high pass filter is recommended for the Super Tweeter PT-R100. The frequency to be cut can be selected with the 12/16/20 kHz terminal to be connected. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.7.7 sound output confirmed
Accessories: none
Main specifications: crossover frequency: 12k/16k/20kHz (-12dB/oct) switching impedance 8Ω maximum input 100W W150 x H105 x D85 mm 1.0 kg
Sunshine's damping sheet with virtual earth is the latest model of an ultra-thin audio damping sheet. 3-layer structure made of iron and resin-based materials/Earth wire uses special copper wire treated with Tigron's H.S.E. The exterior has dullness, small scratches, and some bends (Tomoho Asaine)
Accessories: Earth terminal*alligator clip specification
Main specifications: size W440mm×H1.2mm×D350mm
The degree is good. Along with the previous Matrix series, this is a popular B&W model. Reproduce music in an orderly manner without choosing a genre. The low range, which has a good tone and is rich in scale, is still attractive enough. It lets me listen more closely to music than B&W in recent years. The exterior is good with no noticeable scratches (Shota Sasaki)
Maintenance information: 2024.7.6 sweep test good
Accessories: manual, jumper cable, brush, phase plug
Main specifications: 3-way 3-speaker bass reflex type 8 ohm 91 dB W522 x H1111 x D690 mm 104 kg
Maintained in 2022! Comes with a dedicated stand. Studio monitor speaker with an internal volume of 100 liters. It can also be enjoyed as a listening speaker with sharp mid-high frequencies and low frequency playback that is tight yet has a sense of volume. There is a scratch around the scoker on one side of the exterior (Mizusaki Ryo)
Maintenance information: 2024.7.6 maintained (exterior repair (cleaning/touch up/heavy agent repair/color loss coloring), jumper creation
Saran frame repair/net replacement)
Accessories: jumper plate, stand
Main specifications: 3-way 3-speaker frequency characteristics 30 Hz to 20 kHz output sound pressure level 88 dB/w/m impedance 8 Ω crossover frequency 350 Hz, 4 kHz W 398 x H832 x D424 mm 70 kg/book
Set of 4 A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust on the bottom (Mizusaki Ryo)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
※Since the video system has not been checked, it is being handed over as is. Pioneer's thin AV receiver. High-efficiency Class D amplifier technology developed by Pioneer is used to enable realistic multi-channel playback. Windows 8 certified, DLNA 1.5 compliant, equipped with a variety of network functions. It is full of useful features, such as Air Play compatible, 192 kHz/24 bit high resolution sound source support (FLAC/WAV/AIFF/Apple Lossless compatible, etc.) There are scratches on the exterior. Serial MJID000387JP (Fujisawa Yukishi)
Maintenance information: 2024.7.6 operation confirmed (HDMI and video not checked)
Accessories: remote control, power cord
Main specifications: output 65W (when driving 8ohm/1ch) W435 x H85 x D316 mm 4.1 kg
1 unit only. Mono power amplifier equipped with KT88. This amplifier is recommended for those who want to relax and enjoy music, with a powerful, delicate, and clear sound that plays well even in the low frequencies. The exterior has bumps, paint peeling, and scratches. Serial 0504082R (Fujisawa Yukishi)
Maintenance information: 2024.7.6 operation confirmed
Accessories: bonnet
Main specifications: 50W (UL) 25W (TRIODE) 4.8Ω W180 × H190 × D470 mm weight 14.5 kg (actual measurement)
Maintained! A mono power amplifier with a high degree of perfection as a successor to the U-BROS-11. Transformers developed jointly by Uesugi Laboratories and Tamura Seisakusho are used. The handmade wiring by skilled craftsmen is superb. You can enjoy the delicate, transparent sound. The exterior is dull. Serial 171, 172 (Fujisawa Yukishi)
Maintenance information: 2024.7.6 Maintained (all vacuum tube pins cleaned. There are no RCA jacks or VR input errors. Solder correction. Bias check. Check that the output is approximately 40W. (The interior and exterior have been cleaned.)
Accessories: No accessories
Main specifications: input impedance 100kΩ, rated output 40W (continuous output), output impedance 4/8/16Ω, W435 x H232 x D175 mm, weight 22 kg
※Saran net is out of stock, so it's cheap. Maintained with edge replacement! Infiniti's best-selling speaker. It's a 3-way system that pulls out quite a bit of volume for a tall boy type. The bass is also sufficiently reproducible with a sense of scale coming out of the double woofer, and even pipe organs can be reproduced with plenty of room. You can see a feeling of use on the exterior, sunburn, dullness, spots, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.6 maintained (edge replacement, unit detachment, exterior cleaning)
Accessories: jumper
Main specifications: 3-way system frequency characteristics 35 to 450,000 Hz crossover 250/3,500 Hz 6 ohms W390 × H1200 × D380 mm 40 kg
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. There is a feeling of use, such as a line scratch on the corner, a break in the transport lock fixing parts, etc. Serial MZ009345020052 (Takasaki Atsushi)
Maintenance information: 2024.7.6 sound output confirmed
Accessories: remote control, instruction manual, 2 transport lock screws
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
A full-range unit from Stereo magazine's 2016/8 appendix. Uses Fostex's first aluminum cone diaphragm and center cap. It is characterized by the sound's ability to stand up and sharpness (Murakoshi Yoichi)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: original box, mounting screws, gasket
Main specifications: 8cm full range unit impedance 8 ohms minimum resonance frequency 105 Hz sound pressure level 82.5 dB
Set of 4 Solderless, brass+rhodium plated premium banana plug A double screw system is used to securely lock the cable. *A wrench is required to fix the cable. There is a light bend at the tip of one (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible with cable diameters of 1.5 to 4.0 mm
Goodman ARU is in stock. It comes with a rare original nameplate. If you use a designated box such as an Axiom80 and don't have ARU, please take this opportunity to try it out. There is a slight crack (Kobayashi Hitoshi)
Accessories: none
Main specifications: W374 x H248 x D35 mm
A sharp Japanese vintage coaxial 2-way unit that uses a wide-angle cellular horn for the high range. If you supplement the low range with a bass reflex enclosure rather than tightening it up with an airtight seal, it seems that the level will increase dramatically throughout the entire band. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: 25cm coaxial 2-way 8Ω 95dB crossover 3.5kHz baffle opening 215φmm or 263φmm diameter 290 φmm depth 115mm 3.9 kg
This is a brass tweeter stand for the company's T900A, T925A, and T90A. The tweeter can be stably placed on top of the speaker system. The exterior has small scratches, paint bald spots, dullness, etc. (Hiura Katsuji)
Accessories: none
Main specifications: W65 x H20 x D91 mm weight 471 g
Cartridge stand with acrylic cover made by N2 Factory. It is similar to the company's N2-S1, but it can hold 4 pieces. There are small scratches on the exterior (Hiura Katsuji)
Accessories: original box
Main specifications: W162 x H100 x D78 weight 500 g
※The sound output has been confirmed, but the damper seems to have deteriorated, and the model name printing has disappeared, so it's cheap. EMPIRE MI cartridge. The tone is sharp and rich in shadows. I have the impression that if you apply light needle pressure, the luster will increase and you can enjoy it all round (Hiura Katsuji)
Maintenance information: 2024.7.4 sound output confirmed
Accessories: none
Main specifications: MI type 5 mV needle pressure 0.25 to 1.25 g dead weight 8 g
※The gunmetal base is stuck and cannot be dismantled, and the phono cable is out of stock, so it is cheap. SAEC long tone arms are highly regarded for their high accuracy. Hard ruby is used for the double knife-edge bearing, and it is characterized by clear, crisp sound quality and accurate sound images. The exterior has a feeling of use over time, such as dullness and small scratches (Asae Tomoho)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: none
Main specifications: Double knife edge static balance universal type, total length 367.5 mm, overhang 5 mm, cartridge usage range 12.8 g to 19.8 g (when using standard weights for both shells), 11.5 mm x 15.5 mm between base screws, weight 9.4 kg (actual measurement)
Maintained! with cabinet! Genuine Electri 100V specification. It is an intermediate model developed in response to MC2600 technology. It makes me fully feel the thickness and luster of the mid and low frequencies typical of McKinn, even at low volume. The total balance is good, and the combination with modern speakers is also good. The exterior has a feeling of use such as dullness, small scratches, and air bubbles on the panel. Serial FZ1679 (Tomonori Asaine)
Maintenance information: 2024.7.6 maintained (power stage Tr check, pattern re-soldering power meter SW internal reinforcement, capacitor replacement, SW, VOL cleaning lamp replacement)
Accessories: original box*cabinet is separate instruction manual copy foot
Main specifications: output 150 W+150 W (impedance 2, 4, 8 ohms), damping factor 40 or more, power guard, 1 kHz, overdrive up to 14 dB at 1 kHz, THD within 2%, W445 x H145 x D416 mm, weight 29 kg