The disposal price has been reduced! (Member prices are not applicable) 2024/5/9 sales price 15,000 yen balance cable 3.0 m pair oxygen-free copper OFC Ritz wire type 2 core shield structure. It is a quiet and beautiful sound without falsehood that excludes camouflage. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※Since there is a dent in the arm pipe, it is inexpensive. A popular classic model with a long arm. It is precise and delicate, and in addition, it has a very smooth and loud sound, which clearly shows the characteristics of a long arm. It is a versatile arm that can handle various weights and needle pressures, from lightweight to heavyweight. The exterior is slightly dull. Serial 02924R (Fujisawa Yukishi)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: copy of instruction manual, arm cable, screws, spacers
Main specifications: long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge, 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
Full maintenance has been completed, from exterior repairs to edge replacement and saran net replacement! It's the long-awaited blue baffle 4344. The vividness of the performance is expressed dynamically with a full mid-low range that sets it apart from the tall boy type, and a powerful sound image. It shows an unparalleled compatibility with jazz from the 70s and 90s, soul, rock, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.25 Maintenance completed (exterior repair/polishing/oil finish, front and rear baffle repair/painting, saran net replacement/frame repair, diffuser repair. Woofer edge replacement/cone paper coating,
Mid-edge replacement/cone paper coating, driver magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement, tweeter magnetic circuit gap cleaning, terminal/screw cleaning. Network frequency characteristic check, ATT cleaning, single-sided resistor x3 replacement, terminal cleaning/screw replacement)
Accessories: saran net, diffuser
Main specifications: 4-way 4-speaker bass reflex unit 2235H 2122H 2421B 2405H frequency band 35 Hz to 20 kHz 8 ohms sound pressure level 93 dB W635 x H1,051 x D435 mm 96 kg
Pure Class A stereo power amplifier. Precise sound particles overlap over and over to create a thick sound. It is an amplifier where you can catch a glimpse of the essence of Accuphase, which is close to the core of music by thoroughly refining physical characteristics. In addition to the sense of power and the power of the bass, I still feel attractive in the mid-high range, which has contours and stretches. There are scratches, dirt, and front threads on the top plate (Daiki Goto)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: A grade 60W+60W (8 ohms) dimensions W465 x H238 x D545 mm weight 45.1 kg
※The paint is chipped and scratched, so it is inexpensive. The flagship was introduced as a successor to the C-290 V. This model was equipped with a newly developed AAVA and received overwhelming praise for its high quality at low volume. Although it has high resolution, it lets you listen to music smoothly with a high texture with a fine grain feel. There is a scratch on the cabinet and a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 9 line inputs (RCA x 7/XLR x 2), 4 pre-out systems (RCA x 2/XLR x 2), W477 x H156 x D412 mm, 21.2 kg
※It is cheap because it is heavily cracked on one side. The unique 5-layer structure, which uses a newly developed honeycomb core containing cast iron powder, strongly prevents the speaker from making floor noise. It is a clear black type with cool and hard sound quality, using a hard melanin board as the surface material. In addition to cracks on the exterior, there is a feeling of use such as line damage (Mizusaki Ryo)
Accessories: none
Main specifications: W470 x H41 x D400 mm Top surface: W450 x D350 mm 6 kg/1 sheet
Tawk's thin audio board. Sandwich structure with high density wood board, surface material, and back surface material centered around a honeycomb core containing cast iron powder. It is a heavy board that combines high rigidity, high specific gravity, and high vibration damping properties, and suppresses floor softness. “W” type with warm, soft sound quality. The exterior has scratches, dents, cracks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W495 x H26 x D445 mm 6 kg
Maintained! A type with few exhibits! Crossover 800 Hz network. It is an essential gem for a 2-way system. There is a feeling of use, stains, and small scratches (Ryo Mizusaki)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, cap damage replacement. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: Impedance/bass range 8 ohms, treble range 16 ohms, crossover 800 Hz, high frequency boost, 3 stage switching
It is inexpensive because there are noticeable scratches such as spike marks. An audio base using laminated cherry wood and Nachi stone. The sound image comes out clearly. Perfect for Franco Serblin's Accordo etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W510 x D450 x H80 mm 25 kg
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? There is a feeling of use on the exterior, such as dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
700 series center channel dedicated speaker. It is equipped with a freemount nautilus tweeter and uses a balanced drive type Kepler cone. Perfect for 5.1 channel centers. The exterior has a small scratch on the upper back (Mizusaki Ryo)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: instruction manual, jumper plate, rubber feet
Main specifications: format 2 way 2 speakers bass reflex type playback frequency band 46 Hz to 50 kHz output sound pressure level 91 dB crossover frequency 4 kHz external dimensions W450 x H306 x D289 mm 12.5 kg
It has been refreshed and maintained to brush up by replacing block capacitors, etc.! Kit version of the masterpiece model 7. The parts that can be obtained at the beginning of sale remain the original, and those that are missing use similar parts, and it is a 25th anniversary model that appeared with almost the same structure as the original. As a vacuum tube preamp, you can hear a slightly different tone from other models. There are line scratches on the wood case on the exterior. Serial F030105 (Murakoshi Yoichi)
Maintenance information: 2024.5.9 maintenance (main volume disassembly cleaning repair, selector disassembly contact strengthening repair, block capacitor, fuse holder cap replacement, short pin addition, vacuum tube socket and RCA jack re-caulking repair. Operation has been checked with AC100V) In order to bring the volume curve closer to the original, the OUT LEVEL on the back is narrowed down. 2018.7.15 Maintained (vacuum tubes 12AX7 x 2 replaced, oil capacitors 0.47 μF replaced with BlackBeauty, replaced with 0.33 μF x 2 film capacitors. RCA jack earth reinforcement and caulk repair. Vacuum tube socket caulk repair. Other operations have been checked)
Accessories: none
Main specifications: kit model 12AX7 × 6 W453 × H185 × D260 mm 7.9 kg
This is the best step-up transformer for use with all Shelter MC phono cartridges. It boosts the music signal from the MC phono cartridge without adding extra color. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: none
Main specifications: input impedance 15 ohms or less (maximum 25 ohms) output impedance 47 KΩ boost ratio 32 dB W142 × H66 × D106 mm 1 kg
Comes with original box. Set of 4 pairs of pin plate insulators Since it is made of 2 different materials, you can enjoy the difference in sound quality by replacing the top and bottom. There are paint peeling and small scratches (Tamura Eiji)
Accessories: original box
Main specifications: advanced high carbon cast iron diameter 50mm x height 12mm dead weight 155 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/4 sales price 79,800 yen Silver series adopted in woofers using new technology DCF. The unit, which has the familiar high-speed texture, is stored in a relatively large enclosure. The low range, which has more volume than the size, and the clear mid-high range with a wide range are attractive. The exterior has a feeling of use such as dullness. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: jumper cable (general purpose)
Main specifications: 2-way bus reflex type frequency characteristics 40 Hz to 35,000 Hz, crossover frequency 2,800 Hz, efficiency 88 dB, impedance 8 ohms, W230 x H375 x D329 mm, weight 9.3 kg/unit
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
The price has been reduced! 2024/6/20 sales price 99,800 yen Maintained! B&W bookshelf speakers Each one has good sound granularity and a clean tone, and is compatible with a wide range of genres and sources. It is an attractive, practical speaker with medium to high range quality comparable to advanced models. The exterior has a feeling of use such as sunburn, dullness, and scratches on the front. Serial 0004181 0004182 (Hiroki Aso)
Maintenance information: 2024.6.20 Maintained (one-sided tweeter replacement operation test)
Accessories: Saran net jumper cable bath reflex sponge
Main specifications: 2-way bass reflex type bookshelf speaker playback frequency band 45 Hz to 50 kHz W200 x H340 x D280 mm 8.9 kg
The price has been reduced! 2024/6/18 sales price 5,000 yen*Currently sold. BOSE center speaker Since it is thin, the area around the AV device is not complicated. It is designed to place emphasis on human voice, and is designed to position dialogue in the center even when in a position away from the front. There are stains and scratches on the exterior. Serial 019158963190961AC (Tomoho Asaine)
Maintenance information: 2024.6.18 sweep test good
Accessories: No accessories
Main specifications: 2-way, 4 speakers, bass reflex system, center type, anti-magnetic design unit, low range 5.7 cm cone type x 2/full band 5.7 cm cone
The price has been reduced. 2024/6/24 sales price 34,800 yen This is a well-made DSD-compatible USB-DAC. You can enjoy sophisticated playback sound with the wide range, high resolution, and amount of information unique to 1 bit (DSD). It has 3 input systems and 2 output systems, and has an upsampling function. It comes with a volume and can also be used as a DAC pre. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: input/USB, OPTICAL, COAXIAL output/XLR, RCA PCM (24, 32 bit/32, 44.1, 48, 88.2, 96, 176.4, 192 kHz) OS/Windows 7, Windows Vista SP1 or later, Windows XP SP2 or later (Windows 8 compatible) W210 x H60 x D243 mm 2.6 kg
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 Maintained (end sensor circuit tantalum capacitor replacement, end detection operation check)
2024.6.9 Maintained (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, adapter, oil case, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
※6 month warranty It is a parallel imported model and is probably not sold domestically. It boasts high efficiency (output sound pressure level 94 dB) in the 13 cm class, and lets you hear sharp sounds. There are no noticeable scratches on the exterior. Serial 106067519091742, 106067519091742 (Fujisawa Yukishi)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, original box, saran net, rubber feet
Main specifications: 2-way bass reflex system frequency characteristics 62 Hz to 24 kHz output sound pressure level 94 dB speaker maximum output 340 W W178 x H318 x D208 mm 4.67 kg
※Surface deterioration is noticeable, so it is inexpensive. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. The rigidity is high and low frequency tightness can be expected. The exterior has oxidation and dullness on the metal surface (Satoshi Yonejima)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: No accessories
Main specifications: Die-cast aluminum, self-weight 10.6 g
Speaker cable 2.0m pair ends untreated. It is a cross insulated structure with an air layer called CIS as a damper, and the sound quality is flat and natural without any habit. I think you can use it regardless of genre. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
*The volume cannot be replaced with a replacement product, and the volume cannot be changed with the remote control. Maintained! A mid-range model in the ES series, a masterpiece amplifier from the heyday of audio. While the sound is crisp and well-contoured, the balance that doesn't feel tight is appealing. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 maintenance completed (speaker relay replacement, 16 other resistance deterioration locations replaced, other mute SW, source direct SW, INPUT selector, direct SW, Cartrich LOAD, RECOUT, SW disassembly contact polishing cleaning grease application, A board B board solder poor contact repair, DC bias DC balance adjustment, DC bias DC balance adjustment, volume VR 9 o'clock position replacement for Gari Then the volume cannot be changed. (The current situation is limited due to the weight of BAL and Tone volumes, grease injection treatment for shafts, etc., and no parts and cannot be replaced)
Accessories: remote control, instruction manual
Main specifications: 105W+105W (8Ω) W470 × H165 × D435 mm 21.2 kg
The 1.5m D.U.C.C 7N Cu+ stress-free conductor machined heavyweight aluminum ring and carbon kevlar composite sleeve are eye-catching. It is a high-end cable that is excellent for SN and clearly projects sound images. There are scratches and scuffs on the plug shell (Kojima Yosuke)
Accessories: none
The speaker cable 1.0 m pair custom-made terminal Y Lug 7N uses a composite copper collection centered on ultra-high purity copper, Higher-OFC with thick pure silver coating, and high-purity single crystal PCOCC, and simultaneously transmits fine and delicate information in an accurate, well-balanced, and dynamic manner at the same time as high currents. The storage case will be 2.0m (Kojima Yosuke)
Accessories: storage case
High compliance MC cartridges It boasts a wide range playback capability of 60 kHz, and its sharp, energetic sound is suitable for jazz rock. The sound quality is bright and crisp with good low frequency resolution. The exterior is dull (Jun Tamai)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: needle cover
Main specifications: solid diamond special elliptical needle playback frequency range 20 Hz to 60 kHz voltage 0.4 mV impedance 33 Ω needle tip 0.07 x 0.14 mm square needle pressure 1.4 g dead weight 6 g
A noise filter that removes noise emitted by a device simply by connecting it to the vicinity of a device that emits differential mode noise (differential mode noise), such as a PC, refrigerator, microwave, etc. It can also be used as a power strip, contributing to improving the sound quality of audio components connected to the same wiring in the home and power strips (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
Set of 4 Block shape with R processing on one side of the front. The outside of the speaker fits both R-type and square-shaped types. It has a sturdy design and natural sound quality that brings out the goodness of wood. The exterior has small scratches and a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: W90 x H180 x D320 mm 3.5 kg/bottle
A hidden masterpiece of Japanese MM cartridges. The moderately firm bass and detailed treble are attractive. A versatile cartridge that can be used for a wide range of purposes, from classical music to jazz. There are small scratches on the exterior (Tamai Jun)
Maintenance information: 2024.6.30 sound output confirmed
Accessories: needle cover
Main specifications: mm type frequency characteristics 20 Hz to 20 kHz 47 kΩ output voltage 5 mV suitable needle pressure 1.5 to 2.0 g dead weight 6.5 g
*Currently sold. The final model of the DENON step-up transformer using all LC-OFC lines. Small and affordable, yet clear sound with high S/N. It is a versatile type that is compatible with various cartridges from 3 to 40 ohms. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: none
Main specifications: All LC-OFC lines used, LR independent permalloy double shield compatible cartridge impedance, 3 to 40 ohms, boost ratio 1:10, connection cord, 40 mm, frequency characteristics, 20 Hz to 50 kHz, W50 x H37 x D110 mm, 260 g
※The broken frame of the saran net is being repaired. The top model of the company's 30th anniversary model SCM50! This is a luxurious product that uses high quality parts not used in standard models, such as a coil using pure silver wire for the interior and pure silver plating for the speaker terminal. The exterior is faded on the front, and there are small scratches on the top plate. There is a noticeable blow to the back (Oikawa Tetsuji)
Maintenance information: 2024.6.30 sweep test, operation confirmed
Accessories: instruction manual, spike, spike base, jumper plate
Main specifications: 3-way 3-speaker bass reflex type 88dB 8Ω W400 x H1163 x D500 mm 66.4 kg
The familiar Hayami Kohsan classic 3-tier audio rack is sturdy and easy to use. The load capacity of the top plate and bottom plate is 150 kg, so even heavyweight amplifiers can be loaded without difficulty. In addition to dullness and small scratches on the exterior, there is a feeling of use, with 2 blindfolds missing on the top plate (Hiroki Aso)
Accessories: none
Main specifications: 3-tier rack load capacity: top plate/bottom plate 150 kg, shelf board 50 kg W626 x H522 x D582 mm 38 kg
The price has been reduced! 2024/6/27 sales price 79,800 yen A shell oval needle features the original direct sound of the SPU. The sharp, firm, and powerful mid-low range and detailed expressiveness are attractive. There are fewer incidental sounds than the G-shell elliptical type, so you can enjoy an even more direct tone. The needle cover is partially chipped. Serial 412790 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type 0.2 mV 3 to 4.5 g internal impedance 2 ohms load resistance 47 kΩ oval needle dead weight 23.6 g (mounter and screws included)
The price has been reduced! 2024/6/26 sales price 89,800 yen ※The exterior is in poor condition, so it's cheap. The EA-3 is equipped with a powerful power supply unit, and the exterior has also been completely redesigned with a refined design. The dual mono construction and non-feedback amplifier circuit reproduces smooth analog sound with an excellent sense of signal. The exterior has noticeable scratches on the top plate and front. Serial E31302005 (Yonejima Satoshi)
Maintenance information: 2024.6.26 operation confirmed
Accessories: No accessories
Main specifications: mm/MC compatible phono equalizer gain 38 dB (mm) 65 dB (MC) channel separation 100 dB or more, full stage symmetry, no feedback type, rated output voltage 200 mV (1 kHz) W310 x H86 x D316 mm 5 kg
The price has been reduced. 2024/6/26 sales price 79,800 yen DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Exterior, the saran net is extremely hard to attach and detach, so there are cracks in the dowel hole in one place, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.26 Operation confirmed
Accessories: instruction manual, saran net, jumper, spike, spike holder
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/25 sales price 39,800 yen Hi-Fi Hall first arrival! Beautiful item with original box. An all-weather 2-way compact speaker. It has a polypropylene graphite filled cone woofer and an aluminum tweeter with an acoustic lens wave guide, perfect for outdoor locations with weather protection. Serial IA0111-KM0001510 IA0111-KM0001511 (Asaine Tomoho)
Maintenance information: 2024.6.25 sound output confirmed (good sweep test)
Accessories: original box, English instruction manual, mounting brackets
Main specifications: output sound pressure level 86 dB frequency characteristics 75 Hz to 25 kHz crossover frequency 2.5 kHz size W 182 x 245 x 162 mm weight 5 kg
The price has been reduced. 2024/6/26 sales price 12,800 yen It's a high range with a wide range, and a low to medium range with a sense of volume that you wouldn't think of it as a compact speaker. The speaker has a simple design and is easy to match with the interior. There are small scratches, dullness, etc. on the exterior (Asaine Tomoho)
Maintenance information: 2024.6.27 Operation confirmed (good sweep test)
Accessories: saran net
Main specifications: impedance 6 ohms maximum allowable input: 80 W (JEITA) 120 W (PEAK) frequency band 45 Hz to 60 kHz crossover frequency 2 kHz 6 Ω size W180 x H270 x D165 weight 3.7 kg
Fully maintained! 2-way floor speaker with a double woofer and 1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it plays a thick, and exciting JBL sound in the mid to low range. The finish is beautiful due to exterior maintenance, but there are some paint unevenness and scratches on the corners. Serial 255942/252374 (Yonejima Satoshi)
Maintenance information: 2024.5.27 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn coating, saran net replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, terminal cleaning/screw replacement unit detachment)
Accessories: saran net
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
Everything from the exterior to the internal unit and network was fully maintained in January 2023! Comes with a dedicated trolley and a reflector on the back. Vitavox, which developed mainly commercial equipment for theaters in England, announced in 1947, the company's first high-end corner speaker system for home use. The gentle tone of the horn is full of unrivaled appeal. The elegant design, which can be said to be art suitable for the finest products, is also excellent (Daiki Goto)
Maintenance information: 2023.1.28 Maintained (exterior repair/cleaning, black paint on the back. Woofer maintenance (edge crack repair, magnetic circuit rust removal/gap cleaning/center adjustment.
Driver maintenance (magnetic circuit gap cleaning/center adjustment) network maintenance (terminal block cracks are bonded and reinforced with epoxy. Tuck in some of the terminal screws that are too long. Brush the ATT contacts and clean them. Characteristics were measured, and the results were good, and the original capacitors were continuously used. (Check the sound output)
Accessories: Self-made special trolley, self-made reflector
Main specifications: driver S-2 horn CN481 woofer AK-157 network CN458 W1120 x H1350 x D770 mm (actual measurement)
Maintained! It is a pre-main amplifier with a simple design and full functionality. It is a delicate and careful tone with a luster in a lively, extruded and energetic sound. It shines with a sense of power that goes well with vintage speakers. The exterior is scratched on the top plate, and there is a feeling of use over time. Serial E7V064 (Fujisawa Yukishi)
Maintenance information: 2024.6.29 Maintained (output relay, push SW, semi-fixed VR, electrolytic capacitor, and balance VR replaced. Rotary SW disassembly polishing cleaning. Knob adhesive solder fix. Removes mold and rust. Increase and tighten the screws. Interior and exterior cleaning. Bias and offset check adjustments. (Voice check for each input/output)
Accessories: copy of instruction manual
Main specifications: 150w+150w (8Ω) PHONO (MM/ MC) W445 × H160 × D370 mm 20.5 kg
※It is inexpensive considering conditions such as tobacco odor and dirt. Maintained by the manufacturer. 3-way cross channel divider with 500Hz/7,000Hz specification. If you add the LA-25 and DA-25 options, it can support up to 4 ways. Also, since it can be used by switching to a subwoofer system or a 3D system, it is highly expandable and can be flexibly incorporated into the system. In addition to the exterior, as described above, a feeling of use can be seen, such as stains on the top plate, dullness all over, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.29 Manufacturer maintained (level control volume, cleaned)
Accessories: none
Main specifications: crossover 500 Hz/7,000 Hz dimensions W475 x H170 x D380 mm weight 20 kg
Marantz network receiver. The high signal-to-noise ratio and highly transparent spatial expression are attractive. In addition to CDs and record players, you can enjoy music by various methods such as connecting to Bluetooth, NAS, etc., and streaming. The exterior has a feeling of use such as dullness and small scratches. Serial BJB36210105990 (Murakoshi Yoichi)
Accessories: remote control, instruction manual, FM, AM, BT antenna, power cord, original box
Main specifications: rated output 75W+75W (8Ω) compatible with DSD5.6MHz/PCM192 kHz audio input terminal/analog x 3, Phono (MM) x 1, optical digital x 1, coaxial digital x 1, other terminal/network x 1, USB (front) x 1, Bluetooth /Wi-Fi antenna input x 2 FM antenna input x 1 AM antenna input x 1 Marantz remote bus (RC-5) input/output x 1 IR Flasher input x 1 wireless LAN/IEEE 802.11 a/b/g/n compliant (Wi-Fi® compliant)/2.4 GHz, 5 GHz Bluetooth/version 4.1 compatible profile A2DP 1.2, AVRCP 1.5 compatible codec SBC transmission output/communication distance Class 1/approx. 30 m (line of sight) W440 x H105 x D378 mm 7.9 kg
Speaker stand for the company's S-A4. Ideal for those who use the small bookshelf type. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, peeling veneer, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W220 x D265 mm overall W350 x H600 x D365 mm 10.0 kg/1
The price has been reduced! 2024/5/14 sales price 1,000 yen*Currently sold. Details of only one Sony 15 cm full range unit are unknown, but there is an I-502-437-11 description on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is in a state where there are many signs of use, such as dullness and scratches over time. Serial MZ02722110037 (Yamato Yuki)
Maintenance information: 2024.6.13 maintained (tray slide motor belt, CD standby motor belt replacement, bypass C replacement in other servo boards, operation check)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
The price has been reduced. 2024/6/27 sales price 19,800 yen ※Currently sold. The 50th anniversary model of Diaton has an elegant birdseye maple glossy finish, and the way it sounds is European and smooth. There are stains on the exterior, dullness, abrasions, and the orange saran net (Tomonori Asaine)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, bass reflex, bookshelf type, anti-magnetic design, 13 cm cone type, 3 cm cone type, frequency band 50 Hz to 30 kHz impedance 6.3 Ω sound pressure level 87 dB crossover 5 kHz dimensions W189 x H305 x D198 mm weight 3.7 kg
The price has been drastically reduced. 2024/6/19 sales price 298,000 yen Maintenance completed! Genuine Electric AC 100V specification with cabinet The Macintosh 7000 series stereo power amplifier was announced to coincide with the advent of the CD era. The thick and gorgeous sound typical of the company is attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 maintenance completed (POWER, meter SW internal adhesion reinforcement, power stage Tr check, pattern re-soldering, CR check in the drawer board, connector cleaning, meter logo lamp, C replacement in the power supply board, each SW.VO l. Cleaning, offset, bias adjustment, operation check, panel folding correction.)
Accessories: instruction manual
Main specifications: 270W+270W power guard circuit equipped with frequency characteristics 20 to 20 kHz damping factor 30 W 443 x H240 x D400 mm 37.2 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/21 sales price 328,000 yen with original stand (list price 64,000 yen)! Marble top model It is an improved model of the popular S143, and it expresses sharp and smooth sound images full of dynamism by making the resolution and clarity of the sound more prominent while keeping the richness of volume that is characteristic (Murakoshi Yoichi)
Maintenance information: 2024.6.20 exterior repair, cleaned
Accessories: saran net, jumper, stand, marble top plate, spike holder
Main specifications: 3-way bookshelf impedance 6 ohms allowable input 250 W frequency characteristics 35 Hz to 40 kHz crossover frequency 1.3 kHz/11 kHz dimensions W422 x H1,001 x D403 mm (including stand) weight 55.2 kg (including stand)