Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. The exterior has a broken frame on one side, and there is a feeling of use such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screw rust and insulation bushing deterioration replacement, terminal cleaning 155686 GAIN CON SW defect replacement, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained by the manufacturer! A new dust cover has been created and the exterior has been repaired. Furthermore, the SHURE M44G is included so you can use it right away. The ease of setting is also attractive, but after all, the repeat function and location mechanism that moves the tone arm to the desired position to perform are convenient, so you can easily enjoy analog. There is some paint peeling near the power switch on the exterior (Sasaki Shota)
Maintenance information: Maintained by 2024.7.7 Denon service (arm disassembly repair CDS replacement lead in, out adjustment. (Others, inspection of each part, sound test)
Accessories: copy of the manual, cartridge (SHURE M44G)
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
It is a model commemorating friendship with WADIA in the United States, and WADIA is in charge of the D/A conversion section and analog board. It has a unique character that is different from other domestic CD players, and the high frequencies extend clearly, and you can hear clear sounds, and I feel that the sound output is very bright. The exterior has dents and line scratches on the front side of the top plate, and there is a feeling of use such as deterioration visible inside the tray (Mizusaki Ryo)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, power cord, spike holder
Main specifications: digital input/output terminal, coaxial RCA, 1 optical TOS system, 1 analog output terminal, 1 RCA, XLR system each, equipped with a VRDS (CMK3) mechanism W465 x H157 x D390 mm 14.5 kg
Belt-drive CD player. Playback is possible with smooth and stable disc rotation created by the inertia of the CD stabilizer. You can check the condition of the belt and replace it yourself. It is also equipped with a digital input and headphone jack. The USB input is compatible with PCM32 bit/384 kHz and DSD128/5.6 MHz DOP playback of high-resolution sound sources played back on a computer. There is a scratch on the top of the front panel on the exterior (Ryo Mizusaki)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, instruction manual, power cord, stabilizer, original box
Main specifications: input COAXIAL (SPDIF 24 bit/32 to 192 kHz), TOS (SPDIF 24 bit/32 to 192 kHz), USB 2.0 (PCM 32 bit/32 to 384 kHz, DSD64/2.8224 to DSD128/5.6448 MHz) output COAXIAL, TOS analog output balanced XLR, unbalanced RCA size W435 x H109 x D335 mm approx. 8.6 kg (including CD stabilizer)
Manufacturer maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Mizusaki Ryo)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Maintained! The diaphragm has been replaced with a D16R2421. Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-to-high sound are attractive for slight input
Maintenance information: 2024.7.7 maintained (diaphragm installation adjustment, pad dampener and mounting screw rust replacement, material dirt cleaning, insulation bushing replacement, diaphragm dirt cleaning, diaphragm stain cleaning, diaphragm stain cleaning, diaphragm is likely to be D16R2421, DCR (33380/7.0 ohm diaphragm scratch) DCR (35790/7.0 ohm diaphragm scratch))
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, resistance (80 ohm) defect replacement, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior such as line damage and rust (Ryo Mizusaki)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
Maintained! Popular 500 Hz networks installed in Paragon and Olympus. It uses excellent parts such as high-voltage non-polar capacitors and coils using low-loss Orient cores, and is a network that is easy to use with 500 Hz crosses, and is very easy to use for those who are assembled with 175 or 375 drivers. There is a feeling of use on the exterior, such as line damage and dullness (Mizusaki Ryo)
Maintenance information: 2024.7.7 maintained (terminal terminal mounting screws, rust and insulation bushing deterioration replacement, terminal cleaning, attenuator SW contact cleaning, crossover check OK)
Accessories: none
Key Specifications: Crossover Frequency/500Hz Level Control/3 Position Switch 8Ω W159 × H153 × D120 mm 2.3 kg
*Currently sold. JBL UREI professional power amplifier. Dynamic sound with clear contours and momentum. The driving power that makes it easy to drive even large speakers at a high volume is attractive. It can also be used as mono power by connecting to a bridge. The exterior is generally dull, and there is a feeling of use such as scratches (Mizusaki Ryo)
Maintenance information: 2024.7.7 operation confirmed
Accessories: phone plug for conversion
Main specifications: 150W+150W (8Ω) 300W+300W (4Ω) input 2 systems (phone/XLR) W483 x H180 x D260 mm approx. 20 kg
Audiocraft lightweight shell with 2 lock pins. The highly rigid and solid sound is attractive (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping 8g
※This is a parallel import product. It is a LINN core player directly related to the CD12, where you can enjoy a unique sound with a vintage sound atmosphere. The compact housing and design are typical of the United Kingdom, and the sound is thick in the mid-range, and the high frequencies are not too tough, and you can fully immerse yourself in the music with an exquisite balance. Externally, there are thin line scratches on the top plate. Serial 715027 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 96 kHz/24 bit D/A equipped HDCD compatible analog output/unbalanced 2 systems (RCA x 2) balanced 1 system (XLR x 1) digital output/coaxial/1 system (BNC x 1) · 1 system (TOS x 1) AES/EBU · 1 system (XLR x 1) digital input/no attached functions/voice variable output, left and right balance adjustment, mute W320 x H80 x D326 mm 4.1 kg
It is an aluminum press shell that uses Audiocraft's Perfect Lock pin. The exterior has a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.7.7 continuity confirmed
Accessories: none
Main specifications: dead weight 12g
Maintained! This is a masterpiece preamp from the middle of ML, which has a one-board configuration, and uses a “dual mono construction” with excellent uniformity of balance between left and right, with 2 mono circuits arranged on the left and right targets. It is a preamplifier that has an excellent sound design with an exquisite sense of balance in each part, such as the mid-low range with a core, accurate sound image reproduction, and glossy mid-high frequencies, etc., and the level of music rises dramatically just by introducing it. There are dirt scratches on the exterior. Serial 3157/2494 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 Maintained (replacement of deteriorated parts. Board cleaning/repair. Since the balance switch is not available, disassemble and clean. STEREO ↔ MONO switch installation correction. DC voltage/DC offset voltage/other adjustments)
Accessories: power cord, connection cord, Remo to RCA conversion plug x 2
Main specifications: Dual mono configuration, 4 system input, 2 system tape, 2 system pre-out (1 system Remo, 1 system balance), body dimensions W444 x H78 x D333 mm, weight 4.5 kg, power supply unit dimensions W193 x H78 x D333 mm, weight 3.6 kg
Maintained by the manufacturer in November 2021! The last limited version in the S10 series. The well-built structure, which weighs 29 kg, is directly linked to the sound. It is a powerful machine that has an excellent driving feel and can easily drive even large woofers. Compared to recent modern models with a thin mid-low range, the driving power with a clear sense of energy is attractive. There are scuffs and scratches on the exterior. Serial 2031500557 (Fujisawa Yukishi)
Maintenance information: 2021.11.19 manufacturer maintained (MM/MC changeover switch, protection circuit relay RL401,2 replaced. Input selector switch disassembly, contact polishing cleaning. Tone switch contact reviver treatment, printed circuit board solder crack soldering correction, bias current adjustment, sound output test, and other inspections)
Accessories: power cord
Main specifications: 100W+100W UHC single push circuit high rigidity chassis W434 × H181 × D485 mm 29 kg
Maintained by the manufacturer in March 2023! This model was developed by introducing technology from the conventional PM-11S3. It is a premain amplifier with a high degree of perfection, such as a smooth high frequency with high SN, a low range with a rich sense of volume, and a sound field space with an excellent sense of depth. As for the exterior, there are some scratches on the top plate. Serial 15001339000002 (Fujisawa Yukishi)
Maintenance information: 2023.3.13 Maintained by the manufacturer (replacement of defective transistors, other inspections and adjustments)
Accessories: remote control, instruction manual, power cord
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) Phono input 1 system (MM/MC) line input 3 systems W440 x H123 x 457 mm 18.5 kg
※Comes with a dedicated stand. You can enjoy the smooth, beautiful sound unique to British BBC monitors. As expected, there is plenty of noise regardless of genre, from jazz and classical music to rock and pop music. It captivates with just the right amount of box noise and a design that has guests. There are some scratches on the exterior. Serial 4732 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: instruction manual, stand, original box (speaker only)
Main specifications: 2-way 2-speaker bass reflex system unit, 20 cm cone type for low range, 2.5 cm dome type playback frequency band 43 Hz to 20 kHz output sound pressure level 86 dB impedance 8 Ω maximum input 150 W W271 x H520 x D315 mm 12.5 kg
Maintained! Original Model 7. You can enjoy a glossy mid to high range sound with a high sense of transparency and a thick, exquisite balance. It's a model that has been over half a century since it went on sale for analog fans, but it's still one they admire. The lustrous, indescribable tone is an appeal that cannot be enjoyed on modern devices. There is no cabinet, and there are general-purpose rubber feet. Serial 7-15815 (Takasaki Atsushi)
Maintenance information: 2024.7.6 maintenance (main volume disassembly, cleaning and repair, addition of rubber feet, rubber pads for subchassis, block capacitors, short pin replacement. Vacuum tube socket and RCA jack re-caulking repair. Operation check with AC 100 to 117 V) 2015.4.8 maintenance (OIL.C, resistor (1/2W), electrolytic capacitor 250 μF and 100 μF replacement. Subchassis rubber pad replacement, side pad addition, RCA jack and VT socket re-caulking repair)
Accessories: none
Main specifications: tubular control amplifier, vacuum tube, ECC83/12AX7, 3-stage NF equalizer, NF type step switching control, W453 x H185 x D267 mm, 7.5 kg
※The remote control is missing, and there are many scratches on the front panel, etc., so it is inexpensive. Uses a “power MOS FET,” which has a reputation for sound quality and reliability. Sound quality that claims to be an extrusion not unique to the company with a high degree of perfection. The driving power is sufficient even for standalone stereo operation, but it can be upgraded to a majestic sound with a bridge connection. In addition to the exterior, the black ring on the SP terminal is partially missing, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.5 operation confirmed
Accessories: power cable
Main specifications: stereo power amplifier pure A grade operation rated output 60 W+60 W (8 Ω), 480 w/ch 1 Ω load in stereo specification ~ 60 w/ch 8 Ω load input RCA1, XLR1 speaker output 2 system damping factor 800 impedance 2 to 16 Ω (when stereo specification) S/N ratio 127 dB (GAIN switch -12 dB) W465 × H238 × D515 mm 44.3 kg
* The specifications of the baffles around the unit have been changed to urethane, have deteriorated, and are inexpensive, and are currently being sold. AR tall boy speaker. By adopting a build-in mirror image subwoofer, you can enjoy a slim yet spectacular sense of scale. In addition to the exterior, as described above, a feeling of use can be seen on the unit, such as bond marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.5 operation confirmed
Accessories: saran net, general purpose jumper
Main specifications: 3 way 4 speakers, 97 dB, 8 ohms, frequency characteristics, 30 Hz to 20 kHz, crossover frequency 120 Hz, 2.5 kHz, W265 x H1,093 x D478 mm, 33.3 kg
The degree is good! Lots of accessories! Grace wood-framed tone arm The material is an arm with high processing accuracy that looks like Grace using tender teak wood. The support method is an oil dump with one-point support, and the head shell part is a replacement method with a special shell. It is for cartridges with relatively light needle pressure. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.7 continuity confirmed
Accessories: instruction manual, connection cord, original box, cartridge mounting plate, mounting template, stop screw
Main specifications: static balance, one-point support, oil dump type, effective length 237 mm, compatible cartridge 4 to 13 g, needle pressure range 0 to 3 g
※Since the video system has not been checked, it is being handed over as is. Pioneer's thin AV receiver. High-efficiency Class D amplifier technology developed by Pioneer is used to enable realistic multi-channel playback. Windows 8 certified, DLNA 1.5 compliant, equipped with a variety of network functions. It is full of useful features, such as Air Play compatible, 192 kHz/24 bit high resolution sound source support (FLAC/WAV/AIFF/Apple Lossless compatible, etc.) There are scratches on the exterior. Serial MJID000387JP (Fujisawa Yukishi)
Maintenance information: 2024.7.6 operation confirmed (HDMI and video not checked)
Accessories: remote control, power cord
Main specifications: output 65W (when driving 8ohm/1ch) W435 x H85 x D316 mm 4.1 kg
Comes with a rare original box. It is a famous unit for guitar amplifiers. The rich, clean mid-high range unique to Alnico is attractive. It also responds quickly and has a warm texture. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: original box
Main Specifications: Alnico Magnet 8 inch 8 Ohm 92.5 dB 25W W213 x D59 mm 2 kg
Although it is a B&W entry model, this model has been a long-time seller due to its high cost performance. It plays a wide variety of music genres with an advanced sense of transparency in the mid to high frequencies and a good sound with plenty of sound. A feeling of use can be seen on the exterior, small scratches on the edge, and slight dirt on the top plate and sides (Kobayashi Hitoshi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: saran net, jumper, bass reflex sponge
Main specifications: 2 way 2 speaker bass reflex type 8 ohm output sound pressure level 84 dB W165 x H280 x D276 mm 6.7 kg
It is a ferrite type commonly known as a ferrite-type gun used in the company's SB-65. While the sound quality is soft and straightforward, it also has just the right amount of power, so I think it's suitable for jazz. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: 20cm full range 8Ω screw pitch (diagonal) 194 mm (actual measurement)
TAOC's current speaker stand. Cast iron powder is encapsulated inside, and the top plate part has a double iron plate structure, and it is a model where TAOC's vibration damping technology is fully demonstrated. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: wrenches, screws, spikes, instruction manual
Main specifications: Top plate dimensions W160 x D250 mm Bottom plate dimensions W250 x D350 mm H600 mm (including spikes) Weight 11 kg
A micro record cleaner with a pair cleaner system that removes dirt with a clear brush and wipes clean with a disc cleaner. It is an unusually good product with a rare original box (Murakoshi Yoichi)
Accessories: original box, spare disc cleaner (2 pieces), instruction manual, brush
Main specifications: pipe arm total length 215 mm center shaft adjustment range 36 to 70 mm
Large insulator of unknown manufacturer with a diameter of 60 mm and a height of 20 mm. There are holes for screws, so it seems that it can be diverted to amplifiers, players, etc. The finish and construction are solid. There are small wounds and dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 60mm, height 20mm 425g/piece
MICRO arm-type record cleaner. Simply set it on the player and automatically removes dust, making it effective for the maintenance and longevity of records and needles. You can see the exterior, dullness, and feeling of use (Murakoshi Yoichi)
Accessories: none
Main Specifications: Total Arm Length: 220mm Maximum Effective Length: 190mm Shortest: 150mm Height: Highest: 62mm Lowest: 44mm
This is the first model in Sony's ES series to use an optical system fixing system. The setting using stabilizers is also unique. The sound image is clear, and the sharpness is typical of Sony with a focus. It is a player from the heyday of CDs, where you can enjoy more satisfaction than the price. The exterior has small scratches and a feeling of use such as dullness. Serial 20217 (Tomoho Asaine)
Maintenance information: 2024.7.7 operation confirmed
Accessories: Stablizer remote control instruction manual
Main specifications: CD player, optical fixed pickup, 2 analog outputs (FIXED/VARIABLE), 1 digital system (optical), W430 x H125 x D370 mm, 13.5 kg
Bookshelf Speaker Floor Stand It is designed for small speakers such as the 705 and CM5, and is a stylish design that matches other speakers of similar size. The exterior is dull and has small scratches (Tomoho Asaine)
Accessories: mounting screws
Main specifications: external dimensions W275 x H600 x D365 mm top plate 160 x 200 mm bottom plate 275 x 365 mm 10 kg
This is an orthophone wall socket and baseboard plate set. A highly textured product made of natural oak wood. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original box 60mm long screws x 2
Main specifications: natural wood, oak wood, thickness 20 mm, size 150 x 98 mm, weight 170 g
This high pass filter is recommended for the Super Tweeter PT-R100. The frequency to be cut can be selected with the 12/16/20 kHz terminal to be connected. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.7.7 sound output confirmed
Accessories: none
Main specifications: crossover frequency: 12k/16k/20kHz (-12dB/oct) switching impedance 8Ω maximum input 100W W150 x H105 x D85 mm 1.0 kg
Sunshine's damping sheet with virtual earth is the latest model of an ultra-thin audio damping sheet. 3-layer structure made of iron and resin-based materials/Earth wire uses special copper wire treated with Tigron's H.S.E. The exterior has dullness, small scratches, and some bends (Tomoho Asaine)
Accessories: Earth terminal*alligator clip specification
Main specifications: size W440mm×H1.2mm×D350mm
RCA cable 5.0 m pair is a basic and affordable RCA cable with a titanium-containing sheath boasting low loss and high Sn and the largest cross-sectional area in its class (Tamura Eiji)
Maintenance information: 2024.7.4 continuity confirmed
Accessories: No accessories
The price has dropped! 2024/6/29 sales price 2480,000 yen Everything from the exterior to the internal unit and network was fully maintained in January 2023! Comes with a dedicated trolley and a reflector on the back. Vitavox, which developed mainly commercial equipment for theaters in England, announced in 1947, the company's first high-end corner speaker system for home use. The gentle tone of the horn is full of unrivaled appeal. The elegant design, which can be said to be art suitable for the finest products, is also excellent (Daiki Goto)
Maintenance information: 2023.1.28 Maintained (exterior repair/cleaning, black paint on the back. Woofer maintenance (edge crack repair, magnetic circuit rust removal/gap cleaning/center adjustment.
Driver maintenance (magnetic circuit gap cleaning/center adjustment) network maintenance (terminal block cracks are bonded and reinforced with epoxy. Tuck in some of the terminal screws that are too long. Brush the ATT contacts and clean them. Characteristics were measured, and the results were good, and the original capacitors were continuously used. (Check the sound output)
Accessories: Self-made special trolley, self-made reflector
Main Specifications: Driver S-2 Horn CN481 Woofer AK-157 Network CN458 W1120 x H1350 x D770 mm (actual measurement)
The price has been reduced. 2024/6/30 sales price 8,000 yen. Speaker cable 2.0m pair ends untreated. It is a cross insulated structure with an air layer called CIS as a damper, and the sound quality is flat and natural without any habit. I think you can use it regardless of genre. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
The price has been drastically reduced. 2024/6/8 sales price 17,800 yen ※The vertical stand is out of stock, is cheap because there are many small scratches, and it is currently sold. Stand is missing. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. In addition to the exterior and tape marks, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: AC adapter
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
The price has been reduced! 2024/6/27 sales price 12,800 yen Easy to use 2P type 6-port tap. Suitable for PSE standard audio systems up to mid-level. The exterior is dull and has small scratches. Serial 814001 (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Main specifications: Power cable section 1.8 m
The price has been reduced. 2024/7/2 sales price 22,000 yen FOSTEX horn tweeter FT50H. It plays a role in expanding sound and improving the reproducibility of space. There is dullness and seal marks (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: ferrite magnet impedance 8 ohms frequency band 5000 to 35000 Hz maximum input 50 W output sound pressure 102 dB recommended crossover 7 Khz W60 × H70 × D70 mm
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. There is a feeling of use, such as a line scratch on the corner, a break in the transport lock fixing parts, etc. Serial MZ009345020052 (Takasaki Atsushi)
Maintenance information: 2024.7.6 sound output confirmed
Accessories: remote control, instruction manual, 2 transport lock screws
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/7/2 sales price 198,000 yen Edge replacement and other maintenance has been completed! A 2-way system equipped with a large horn and professional driver typical of JBL. You can enjoy the exhilarating feeling unique to JBL with good extrusion in the mid and low frequencies and wide dynamic range of sound reproduction. It is an easy-to-use speaker that has a characteristic that produces sound with good momentum, and does not require an amplifier. It has been repaired, but there is still a slight feeling of use such as stylus repair marks (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 maintenance completed (top plate coating, other overall cleaning/touch repair, saran net replacement, .woofer edge replacement, driver magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement)
Accessories: saran net, jumper
Main specifications: 2 way, 2 speakers, bass reflex system, floor type frequency band 32 to 2 kHz, crossover 950 Hz, sound pressure level 92 dB, 6 ohms, W561 x H985 x D406 mm, 52.3 kg
The price has been reduced. 2024/7/1 sales price 398,000 yen It has been refreshed and maintained to brush up by replacing block capacitors, etc. Kit version of the masterpiece model 7. The parts that can be obtained at the beginning of sale remain the original, and those that are missing use similar parts, and it is a 25th anniversary model that appeared with almost the same structure as the original. As a vacuum tube preamp, you can hear a slightly different tone from other models. There are line scratches on the wood case on the exterior. Serial F030105 (Murakoshi Yoichi)
Maintenance information: 2024.5.9 maintenance (main volume disassembly cleaning repair, selector disassembly contact strengthening repair, block capacitor, fuse holder cap replacement, short pin addition, vacuum tube socket and RCA jack re-caulking repair. Operation has been checked with AC100V) In order to bring the volume curve closer to the original, the OUT LEVEL on the back is narrowed down. 2018.7.15 Maintained (vacuum tubes 12AX7 x 2 replaced, oil capacitors 0.47 μF replaced with BlackBeauty, replaced with 0.33 μF x 2 film capacitors. RCA jack earth reinforcement and caulk repair. Vacuum tube socket caulk repair. Other operations have been checked)
Accessories: none
Main specifications: kit model 12AX7 × 6 W453 × H185 × D260 mm 7.9 kg
The price has been drastically reduced! 2024/7/5 sales price 278,000 yen Hi-Fi Hall first arrival! Maintained! Genuine Axis product. A power amplifier that allows you to enjoy the suppleness and strength unique to Claire Sound. There is firm extrusion centered around the low frequencies, and the sound goes through the core. There are scratches on the exterior. Serial 15104100638 (Fujisawa Yukishi)
Maintenance information: 2024.7.5 Maintained (all replaced due to faulty and deteriorated display LEDs. Diffusion cap mounting resistor replacement. The standby circuit capacitor was replaced due to deformation. Solder correction. Bias and offset checks. Output audio check. *The speaker makes a slight pop sound only when the rear breaker is inserted, but this is a specification. (XLR input is ① GND ② HOT ③ COLD)
Accessories: power cord
Main specifications: rated output/250W (8Ω) 500W (4Ω) bridge connection 1000W (8Ω) gain 25.7dB input terminal RCA1 system/XLR1 system speaker output terminal 1 system W438 x H143 x D434 mm 29 kg
The disposal price has been reduced! Member prices are not applicable. 2024/7/3 sales price 228,000 yen ※ It is cheap because it is in poor condition, such as broken corners or large chips. A luxury 2-way bookshelf with a sturdy cabinet and an eye-catching Scandinavian furniture finish. As Clystal Clear Sound advocates, it is a delicate, high-fidelity sound with good visibility. There is stickiness due to deterioration around the tweeter. Serial 8780052L, 8780052R (Fujisawa Yukishi)
Maintenance information: 2024.7.3 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers bass reflex type frequency characteristics 47 Hz to 30.0 kHz crossover frequency 3,100 Hz efficiency 87 dB impedance 4 ohms W214 x H386 x D366 mm weight 10.3 kg
The price has been reduced! 2024/7/2 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on the dust cover on the exterior. *The phono cable comes with a non-genuine 1m specification. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: power cord, phono cable (non-genuine 1m), original box, subway
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been drastically reduced. 2024/7/1 sales price 248,000 yen Maintained! This is Macintosh's first transistor control amplifier. It has a crisp and comfortable sound, and it makes me hear a unique McKinn sound reminiscent of a vacuum tube. Scratches and line marks can be seen on the exterior. Serial 33D80 (Fujisawa Yukishi)
Maintenance Information: 2024.7.1 Maintained (Coupling Capacitor Replaced. Selector switch contact cleaning. Mode switch disassembly contact polishing contact grease application. Volume contact cleaning. Rubber foot attachment (Check the operation of each input/output)
Accessories: No accessories
Main specifications: PHONO2 system equalizer curve switching (LP, RIAA) W407 x H135 x D275 mm 7.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/28 sales price 998,000 yen ※The front panel is 20.6L, but it is an upgraded product from 20.5. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. *The positions of the SN.689 output terminals are reversed in red and black. *To connect to a speaker, connect the red output terminal to the positive side of the speaker and the black output terminal to the negative side of the speaker. Serial 689, 690 (Fujisawa Yukishi)
Maintenance information: 2024.6.28 Maintained (transistor/resistor replacement) 2024.4.4 Maintained (replacement of deteriorated parts. Solder deterioration area re-soldering treatment (solder removed/new solder after cleaning) DC voltage/DC offset voltage/idling current/other inspection adjustments. Short plug refill. The red and black positions of the 689 output terminals are reversed, but they cannot be replaced. (This is an upgraded product from NO.20.5L (6212/6213))
Accessories: copy of instruction manual, power cord, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
The price has been reduced! 2024/7/4 sales price 99,800 yen TANNOY studio monitor series. Coaxial 2-way bass reflex type In addition to the pleasant and clear mid-high range, the bass range also has a solid resolution, and vocals, piano, and jazz bass sounds are also well reproduced. It is a speaker that can be enjoyed regardless of genre, from classical music to jazz. There are scratches, dirt, and some tears on the exterior. Serial 167224 167246 (Yonejima Satoshi)
Maintenance information: 2024.7.4 sweep test is good
Accessories: saran net
Main specifications: coaxial 2-way bass reflex impedance 8Ω, efficiency 93dB, maximum input 200W, W300 x H460 x D230 mm, 12.0 kg
The price has been reduced! 2024/7/3 Rotel's high-end CD player with a sales price of 89,800 yen. Equipped with the Wolfoson WM8740 DAC chip with 192 kHz/24 bit resolution, you can enjoy clear, natural, and high-resolution sounds. *Remote control is not included. The exterior is good with no noticeable scratches. Serial 751-0461033 (Yonejima Satoshi)
Maintenance information: 2024.7.3 operation confirmed
Accessories: power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg