The price has been drastically reduced! 2024/6/25 sales price 258,000 yen Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of a wide range of ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Fujisawa Yukishi)
Maintenance information: 2024.6.5 maintenance (TR in EX Pander board, Tr replacement in headphone board, operation check, connector caulking cleaning, solder processing) 2022.9.29 maintained (contacts cleaned due to poor switch and volume contact. The flat cable was replaced due to poor deterioration. The electrolytic capacitor has been replaced. The panel lamp has been replaced. (The power supply circuit tap was changed to 100V specification.)
Accessories: copy of instruction manual
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
Maintained in February 2023! Grey version of 4312MK2. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. There are no noticeable scratches on the exterior. Serial J373-011128/J372-010723 (Yonejima Satoshi)
Maintenance information: 2023.2.24 maintained (all exterior paint exterior cleaning/repair saran frame reinforcement painting/net replacement woofer cone paper coating tweeter grill dent correction ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
Overhauled and maintained in January 2023! Middle monitor gray finish specification. The punchy bass and sharp, smooth midrange are white eyebrows. After all, playing records on this speaker is fascinating. There are small scratches and repair marks on the exterior (Sasaki Shota)
Maintenance information: 2023.1.29 Maintained (all exterior painted. exterior repair. plate repair. Create a new Saran Net. All units are coated with corn paper. Woofer maintenance (cleaning the gap on one side, center cap replacement, edge damping agent application. Resonance correction, frame polishing) mid-maintenance (frame painting. 1 rivet misalignment fixed) unit detachable) internal connection terminal (faston) replaced with a new one. ATT replacement with a brand new one. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveforms and balance. (Check the sound output)
Accessories: none
Main specifications: 3 way 3 speaker front bass reflex type sound pressure level 91 dB impedance 8 ohm crossover frequency 1.5 kHz/6 kHz playback frequency band 45 to 15,000 Hz W362 x H597 x D298 mm 20 kg per unit
The price has been reduced. 2024/6/3 sales price 228,000 yen Both the interior and exterior have been maintained! 4312MK2 grey version. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. The exterior has been beautifully finished due to maintenance. Serial J372-010877 J373-011514 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 maintained (exterior cleaning and touch-up saran frame painting and net replacement tweeter maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, internal urethane replacement, grill and screw coating, rubber ring replacement) mid-maintenance (corn paper repair and coating) ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/29 sales price 298,000 yen Maintained including 2ch/4ch heads. 4TR-4ch head unit JT-2044T included! A tape deck with a separate design that completely separates the tape transport and control amplifier. It uses a tape speed of 38 cm/s, has wide frequency characteristics and dynamic range, and achieves a high signal-to-noise ratio. A size 10 reel can be used. It is also compatible with the 4ch stereo that was popular at the time (another TAU-11 is required). The exterior has scratches, dullness, and corrosion appropriate to the model year.
Maintenance information: 2024.6.25 Maintained (mechanical partial cleaning, oil grease application, counter belt replacement. Transport part volume contact cleaning, switch contact disassembly cleaning. Replace 40 amplifier deterioration tongisters and adjust playback and recording levels. Mirror polishing treatment due to surface rust and wear steps on the recording and playback head. 4TR,2TR head maintenance completed. (Refill 3 missing attached pin cords, replace power cords due to deterioration)
Accessories: 4TR-4ch head unit JT-2044T, connection cable, power cable
Main specifications: 38 cm/s, 19 cm/s compatible frequency characteristics: 38 cm/sec: 30 to 28,000 Hz 19 cm/sec: 40 to 20,000 Hz RTU-11: W460 × H411 × D246 mm 22.3 kg TAU-11: W460 × H141 × D246 mm 5.2 kg
The price has been drastically reduced. 2024/7/1 sales price 248,000 yen beautiful item! DENON's current SACD player. A state of the art machine compatible with DSD 11.2 MHz high resolution sound source with USB input. A sense of speed and characteristics typical of a modern aircraft with good resolution have been added to the conventional loose, thick sound quality. Due to the balanced output switching function, there is no problem connecting to overseas amplifiers. There is a feeling of use on the exterior, such as slight dullness and small scratches. There is a small scratch on the back of the remote control. Serial AGU15170400698 (Fujisawa Yukishi)
Maintenance information: 2024.7.1 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: DSD11.2 MHz/PCM384 kHz 32 bit compatible, digital input terminal USB-A x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 1, W434 x H137 x D404 mm 21.4 kg
The price has been drastically reduced. 2013/7/23 sales price 298,000 yen Edison disc phonograph. It's a name given by Edison, who created the gramophone, and there seems to be an anecdote where he was amazed and jumped up when he first heard the sound from a cylindrical gramophone he made himself. You can't enjoy the indescribable atmospheric sound anywhere else. A horn that is one size larger than the H19 is used. The exterior also has cracks, peeling, and cracks on the veneer due to aging. Also, rust is conspicuous on the wheels underfoot (Oikawa Tetsuji)
Maintenance Information: 2013.7.23 Maintained
Accessories: handle, snail
Main specifications: horn opening W392 x H260 mm main body W484 x H1140 x D500 mm
Internal and external maintenance has been applied and brushed up! The first model of the JBL standard monitor 4312. The sound directly related to the 4311 series, which is the only 4312 series to use a paper cone tweeter, is attractive. The tense mid-low range is full of dynamism that embodies JBL. The exterior is beautifully finished. Serial 37442/43895 (Tamura Eiji)
Maintenance Information: 2024.7.5 Maintained (enclosure polishing, oil/wax painting. Baffle painting, new saran net created. Woofer mid tweeter cone paper coating. Network maintenance: frequency characteristics check, ATT cleaning. (Detachable unit)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex woofer 2213H/ scoker LE5-12/tweeter LE25-2 8Ω 91 dB W362 x H597 x D302 mm 20 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/16 sales price 378,000 yen ※The power supply section has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The price has been drastically reduced. 2024/7/1 sales price 248,000 yen Maintained! This is Macintosh's first transistor control amplifier. It has a crisp and comfortable sound, and it makes me hear a unique McKinn sound reminiscent of a vacuum tube. Scratches and line marks can be seen on the exterior. Serial 33D80 (Fujisawa Yukishi)
Maintenance Information: 2024.7.1 Maintained (Coupling Capacitor Replaced. Selector switch contact cleaning. Mode switch disassembly contact polishing contact grease application. Volume contact cleaning. Rubber foot attachment (Check the operation of each input/output)
Accessories: No accessories
Main specifications: PHONO2 system equalizer curve switching (LP, RIAA) W407 x H135 x D275 mm 7.7 kg
※Since there is a dent in the arm pipe, it is inexpensive. A popular classic model with a long arm. It is precise and delicate, and in addition, it has a very smooth and loud sound, which clearly shows the characteristics of a long arm. It is a versatile arm that can handle various weights and needle pressures, from lightweight to heavyweight. The exterior is slightly dull. Serial 02924R (Fujisawa Yukishi)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: copy of instruction manual, arm cable, screws, spacers
Main specifications: long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge, 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The price has been drastically reduced! 2024/6/11 sales price 218,000 yen A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior has dullness, small scratches, and threads. Serial 00687/00688 (Yonejima Satoshi)
Maintenance information: 2024.6.11 sweep test good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
The disposal price has been reduced! Member prices are not applicable. 2024/7/3 sales price 228,000 yen ※ It is cheap because it is in poor condition, such as broken corners or large chips. A luxury 2-way bookshelf with a sturdy cabinet and an eye-catching Scandinavian furniture finish. As Clystal Clear Sound advocates, it is a delicate, high-fidelity sound with good visibility. There is stickiness due to deterioration around the tweeter. Serial 8780052L, 8780052R (Fujisawa Yukishi)
Maintenance information: 2024.7.3 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers bass reflex type frequency characteristics 47 Hz to 30.0 kHz crossover frequency 3,100 Hz efficiency 87 dB impedance 4 ohms W214 x H386 x D366 mm weight 10.3 kg
The disposal price has been reduced. Members are not eligible for discounts. 2024/6/14 sales price 238,000 yen Maintained! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than those after C29. That rich sound can truly be said to be a preamp representing the golden age of Mackins'. There are scratches, small scratches, and partial peeling on the exterior. Serial AK1482 (Tamura Eiji)
Maintenance information: Maintained on 2017.7.8 (main volume contact cleaning (slight gang error may occur because parts are not available). Other switches, volume contact cleaning. Amplifier board electrolytic capacitor replacement. Panel lamp replacement. RCA terminal replacement. Correction of areas where panel peeling can be fixed. Check the operation of each input/output)
Accessories: instruction manual (English)
Main specifications: input terminals, RCA4, PHONO input, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
The price has been reduced. 2024/6/27 Sales price 198,000 yen Maintained by the manufacturer! Lux mid-level class premain. Equipped with a warm colored VU meter. It has a strong low frequency that exceeds the output, and a soft tone typical of a lux. There is a feeling of use on the exterior due to small scratches etc. (Tamai Jun)
Maintenance information: 2024.6.27 Luxman maintained (output relay replacement meter lamp replacement power unit/diode replacement board solder correction
Switch volume contact cleaning, internal cleaning, comprehensive adjustment operation confirmation)
Accessories: remote control instruction manual power cable
Main specifications: 100W+100W (8Ω) size W467 x H179 x D440 mm 20 kg
It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Due to the sharp followability of the knife edge, the clear and cohesive sound quality still boasts high performance today. The exterior is slightly oxidized and dull. Serial 07031R (Satoshi Yonejima)
Maintenance information: 2024.6.26 operation confirmed
Accessories: connection cable
Main specifications: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g
※This is a parallel import product. It is a LINN core player directly related to the CD12, where you can enjoy a unique sound with a vintage sound atmosphere. The compact housing and design are typical of the United Kingdom, and the sound is thick in the mid-range, and the high frequencies are not too tough, and you can fully immerse yourself in the music with an exquisite balance. Externally, there are thin line scratches on the top plate. Serial 715027 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 96 kHz/24 bit D/A equipped HDCD compatible analog output/unbalanced 2 systems (RCA x 2) balanced 1 system (XLR x 1) digital output/coaxial/1 system (BNC x 1) · 1 system (TOS x 1) AES/EBU · 1 system (XLR x 1) digital input/no attached functions/voice variable output, left and right balance adjustment, mute W320 x H80 x D326 mm 4.1 kg
Maintained by the manufacturer! 2-way dedicated multi-channel divider for FB-12500 loading. 2-way exclusive design with balanced input/output circuits. You can build a clear and fresh multi-system. The exterior has a feeling of use such as dullness. Serial D8Y210 (Tomonori Asaine)
Maintenance information: 2024.7.5 maintained (level volume cleaning, good characteristics and operation checks)
Accessories: power cable FB-12500 board
Main specifications: crossover 12.5 kHz W475 x H150 x D395 mm weight 10 kg
The price has been reduced. 2014/7/13 sales price 198,000 yen 2014/7/13 spring has been exchanged! Columbia Grahonora is a gramophone with an orthodox design that doesn't take up much space. It feels like it's in the narrow range and sounds almost only in the mid range, but it has a retro vibe that sounds like it's playing in the background of a black and white movie. The brakes are good, and pitch control is also very sensitive. There are age stains, scratches, and rust on the exterior as a whole. Spring type (Hei Kazuyuki)
Maintenance information: 2014.7.13 Maintained (spring repair operation confirmed)
Accessories: no accessories
Main specifications: W425 x H345 x D478 mm 17 kg
Disposal price reduction. 2013/9/16 sales price 298,000 yen longitudinal vibration SP special gramophone. serial 67906. Thomas Edison's rise to fame was the invention of the gramophone in 1877. If you think about the sound from 100 years ago, it's indescribably moving. Immerse yourself in your unique view of the world. The exterior has scratches, dirt, etc., and there is a cabinet crack on one side of the back (Oikawa Tetsuji)
Maintenance information: 2013.7.31 Maintained (brake shoe replacement, position adjustment, rotation system disassembly repair) *Normal SP cannot be regenerated. Please prepare SP (thick SP) for longitudinal vibration.
Accessories: handle, snail
Main specifications: horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
The A2500 is a tube type power amplifier kit that has been replaced with speaker terminals that are easy to use even for beginners. 6AQ8 for the first stage and 12AU7 for the phase reversal stage both use triodes. Since triodes are used across all stages, the sound is taut and bright, with excellent nude characteristics. The exterior has dullness over time, rust, and small scratches. Serial 560561 (Miura Kimiya)
Maintenance information: 2018.4.28 Maintained (printed circuit board resistor replaced. (Adjustment characteristics check OK) 2014.11.21 maintenance completed (input VR, vacuum tube socket, coupling capacitor, SP terminal, BIAS DC BAL, semi-VR, each deterioration exchange, adjustment, characteristic check OK)
Accessories: instruction manual
Main specifications: 6 RA8 push-pull 6 RA8 x 4/12 AU7 x 2/6AQ8 10W+10W W410 x H145 (with hood) x D190 mm 9.6 kg
The price has been drastically reduced! 2024/6/24 sales price 198,000 yen Maintained! Comes with wood cabinet! 4th generation model in the P-300 series. The power has also increased by about 20W since the initial model, and the sense of stability has increased even more. On the sound side, the impression is that the thick sound remains the same, and smoothness has been added. The exterior has small scratches and a feeling of use such as dullness. Serial F5X194 (Tomonori Asane)
Maintenance information: 2024.6.24 maintained (output relays, electrolytic capacitors, semi-fixed VR, push switches replaced due to defects and deterioration, ATT disassembly cleaning, solder correction switch knob correction bias and offset check, adjustment, output voice check, interior and exterior cleaning)
Accessories: copy of instruction manual
Main specifications: 170W+170W (8Ω) left and right independent volume level adjustable W445 x H160 x D373 mm 23 kg
Fully maintained! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. The exterior has dullness, small scratches, and paint peeling. Serial 473753 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 30W/30W) input/output waveform confirmation sound output check performed impedance switching SW gain VOL disassembly contact refinement oxidation and sulfidation prevention grease coating input/output waveform confirmation load test (1 kHz) (Sine wave at 8Ω load: 30W+30W) sound output test)
Accessories: copy of instruction manual
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/7/2 sales price 198,000 yen Edge replacement and other maintenance has been completed! A 2-way system equipped with a large horn and professional driver typical of JBL. You can enjoy the exhilarating feeling unique to JBL with good extrusion in the mid and low frequencies and wide dynamic range of sound reproduction. It is an easy-to-use speaker that has a characteristic that produces sound with good momentum, and does not require an amplifier. It has been repaired, but there is still a slight feeling of use such as stylus repair marks (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 maintenance completed (top plate coating, other overall cleaning/touch repair, saran net replacement, .woofer edge replacement, driver magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement)
Accessories: saran net, jumper
Main specifications: 2 way, 2 speakers, bass reflex system, floor type frequency band 32 to 2 kHz, crossover 950 Hz, sound pressure level 92 dB, 6 ohms, W561 x H985 x D406 mm, 52.3 kg
The A3500 vacuum tube power amplifier has been refreshed by thorough maintenance down to the smallest details, such as volume disassembly and polishing. The warm, fresh tone, filled with the appeal of a vacuum tube type, is still appealing enough today. You can enjoy music with a rich, thick tone that contrasts with the clicking tones of recent vacuum tube amplifiers. As for the exterior, paint deterioration and peeling can be seen on the transformer on one side, and there is a feeling of use such as dullness, small scratches, etc., and there is a dent in the hood. ※3-pole tube connection specification. 20W+20W (actual measurement) is output as specified by the manufacturer (Takasaki Atsushi)
Maintenance information: 2023.2.3 maintained (main tube (6CA7) replacement vacuum tube socket, block capacitor, electrolytic capacitor, oil capacitor, SP and RCA terminals, complete disassembly of semi-fixed VR replacement power input gain volume, contact polishing, anti-oxidation/sulfation grease coating load test (8Ω load 1kHz 20W+20W) input/output waveform confirmation sound output check performed)
Accessories: copy of the manual
Main specifications: 20W+20W (8Ω) vacuum tube 6CA7×4/6AQ8×3 W465×H168×D206mm 16kg
The disposal price has been reduced. Member prices are not applicable. 2024/6/30 sales price 198,000 yen Maintained! This is Ayre's DVD/CD transport. It is a high-end transport that has taken the world by storm with its natural sound and images. The audio is digital out XLR only. There are 3 video systems: component, composite, and S-video. The exterior has small scratches and dullness (Oikawa Tetsuji)
Maintenance information: 2024.6.29 Maintained (The chatter absorption capacitor on the detection switch on the DVD mechanical part solution has been replaced from aluminum electrolysis to tantalum electrolysis. (The mechanical part and optical system were cleaned)
Accessories: power cable, original box ※ remote control missing
Main specifications: body part: W460 x H158 x D310 mm 11 kg power supply part: W330 x H94 x D220 mm 4.5 kg
Maintained by the manufacturer in November 2021! The last limited version in the S10 series. The well-built structure, which weighs 29 kg, is directly linked to the sound. It is a powerful machine that has an excellent driving feel and can easily drive even large woofers. Compared to recent modern models with a thin mid-low range, the driving power with a clear sense of energy is attractive. There are scuffs and scratches on the exterior. Serial 2031500557 (Fujisawa Yukishi)
Maintenance information: 2021.11.19 manufacturer maintained (MM/MC changeover switch, protection circuit relay RL401,2 replaced. Input selector switch disassembly, contact polishing cleaning. Tone switch contact reviver treatment, printed circuit board solder crack soldering correction, bias current adjustment, sound output test, and other inspections)
Accessories: power cord
Main specifications: 100W+100W UHC single push circuit high rigidity chassis W434 × H181 × D485 mm 29 kg
An MC boost transformer that uses two transformers taken from the same console (microphone input transformer) in the 1940s. Detailed specs are unknown. The 2 system inputs can be switched with a toggle switch (Daiki Goto)
Maintenance information: 2024.7.2 storefront operation confirmed
Accessories: none
Main specifications: W100×D135×H100mm
It is a model commemorating friendship with WADIA in the United States, and WADIA is in charge of the D/A conversion section and analog board. It has a unique character that is different from other domestic CD players, and the high frequencies extend clearly, and you can hear clear sounds, and I feel that the sound output is very bright. The exterior has dents and line scratches on the front side of the top plate, and there is a feeling of use such as deterioration visible inside the tray (Mizusaki Ryo)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, power cord, spike holder
Main specifications: digital input/output terminal, coaxial RCA, 1 optical TOS system, 1 analog output terminal, 1 RCA, XLR system each, equipped with a VRDS (CMK3) mechanism W465 x H157 x D390 mm 14.5 kg
The price has been reduced! 2024/7/2 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on the dust cover on the exterior. *The phono cable comes with a non-genuine 1m specification. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: power cord, phono cable (non-genuine 1m), original box, subway
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The disposal price has been reduced. Member prices are not applicable. 2023/5/13 sales price 250,000 yen*The main volume, BASS, and TREBLE knob textures are different from the original. Internal parts have been thoroughly reviewed and maintenance has been carried out! This is a control amplifier from Sony's high-end brand, the Esprit series. Straight sound with a sense of speed similar to the TA-E900. The outline is clear and the sound image is drawn clearly. It is a vintage speaker and is especially recommended for jazz and rock fans. On the exterior, in addition to dullness and small scratches, there is a feeling of use, such as sticker marks on the top plate. Serial 200616 (Hiroki Aso)
Maintenance information: 2023.3.4 maintained (running test by refining the I/O board and screw parts) 2022.10.1 maintained (condenser semi-fixed resistance relay LED lamp IC spark killer Capricorn washer replacement implementation all SW VR disassembly cleaning board solder surface re-solder input/output waveform confirmation and left and right balance confirmation comprehensive operation test)
Accessories: copy of instruction manual
Main specifications: 2 PHONO inputs, 5 line inputs, 2 pre-out systems, W480 x H105 x D465 mm, 12.5 kg
※Saran net is out of stock, so it's cheap. Maintained with edge replacement! Infiniti's best-selling speaker. It's a 3-way system that pulls out quite a bit of volume for a tall boy type. The bass is also sufficiently reproducible with a sense of scale coming out of the double woofer, and even pipe organs can be reproduced with plenty of room. You can see a feeling of use on the exterior, sunburn, dullness, spots, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.6 maintained (edge replacement, unit detachment, exterior cleaning)
Accessories: jumper
Main specifications: 3-way system frequency characteristics 35 to 450,000 Hz crossover 250/3,500 Hz 6 ohms W390 × H1200 × D380 mm 40 kg
Maintained by the manufacturer in March 2023! This model was developed by introducing technology from the conventional PM-11S3. It is a premain amplifier with a high degree of perfection, such as a smooth high frequency with high SN, a low range with a rich sense of volume, and a sound field space with an excellent sense of depth. As for the exterior, there are some scratches on the top plate. Serial 15001339000002 (Fujisawa Yukishi)
Maintenance information: 2023.3.13 Maintained by the manufacturer (replacement of defective transistors, other inspections and adjustments)
Accessories: remote control, instruction manual, power cord
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) Phono input 1 system (MM/MC) line input 3 systems W440 x H123 x 457 mm 18.5 kg
Belt-drive CD player. Playback is possible with smooth and stable disc rotation created by the inertia of the CD stabilizer. You can check the condition of the belt and replace it yourself. It is also equipped with a digital input and headphone jack. The USB input is compatible with PCM32 bit/384 kHz and DSD128/5.6 MHz DOP playback of high-resolution sound sources played back on a computer. There is a scratch on the top of the front panel on the exterior (Ryo Mizusaki)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, instruction manual, power cord, stabilizer, original box
Main specifications: input COAXIAL (SPDIF 24 bit/32 to 192 kHz), TOS (SPDIF 24 bit/32 to 192 kHz), USB 2.0 (PCM 32 bit/32 to 384 kHz, DSD64/2.8224 to DSD128/5.6448 MHz) output COAXIAL, TOS analog output balanced XLR, unbalanced RCA size W435 x H109 x D335 mm approx. 8.6 kg (including CD stabilizer)
Disposal prices have been reduced. Member prices are not applicable. 2013/7/23 sales price 298,000 yen ※ longitudinal vibration SP special gramophone. serial 6083. The Thomas Edison Sound is now being revived after 100 years. I am impressed by the well-conceived metal horn system, rotation adjustment mechanism, volume adjustment mechanism, etc. in the old fashioned way. There are scratches etc. on the cabinet that make it feel old. It has been repaired to a level where there is no anxiety about playback. Can be used normally (Yasuhito Koshihama)
Maintenance information: 2013.2.17 Maintained (sound box repair, spring repair, rotation adjustment mechanism repair, brake repair) 2013.7.23 operation checked
Accessories: handle, snail
Key Specifications: The needle tip of the sound box is a diamond. Horn opening W345 x H230 mm body dimensions W455 x D515 x H1055 mm
The disposal price has been reduced. Member prices are not applicable. 2024/1/18 sales price 118,000 yen Maintained! QUAD's first transistor preamp. The deep sound image and the impression that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. Of course, it's a combination with the 303, and the sound doesn't feel out of place even when paired with a vacuum tube power amplifier. BAL knobs are worn out (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (front push button contact failure → cleaning, PHONO/LINE in-board coupling capacitor replacement. AC spark killer capacitor broken → replaced, each VOL cleaned, power cable created)
Accessories: copy of instruction manual
Main specifications: external dimensions W550 x H110 x D220 mm, weight approx. 7.4 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Tweeter has been maintained! An extremely heavy center speaker with a large unit tightly packed into a compact enclosure. An amplifier with driving power is required, but it reproduces vocals with a sense of temperature. There are abrasions and paint peeling along the corners (Kojima Yosuke)
Maintenance information: 2024.7.5 maintained (complete magnetic circuit disassembly, assembly and repair due to removal of the tweeter from the ATC tweeter repair main body, detachment management costs, tweeter repair, and neodymium magnet rust)
Accessories: jumper plate
Main specifications: 2 way 3 speakers, sealed playback frequency band, 48 Hz to 20 kHz, crossover frequency, 2.5 kHz, output, sound pressure level, 86 dB, impedance, 8 ohms, W600 x H212 x D300 mm, 26.5 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. There is a feeling of use such as dullness. Serial 3121 (Takasaki Atsushi)
Maintenance information: 2024.3.22 maintained (INPUT DIN4P and AC connector replacement, DIN4P-RCA x 2 (1m) creation, internal check, DC cut C, coupling C replacement, RCH offset VOL exchange, constant change in constant voltage circuit)
Accessories: copy of manual, power cord, connection cord
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
The price has been drastically reduced! 2024/6/21 sales price 118,000 yen Maintained! The first α907 model. The alpha series has the highest overwhelming power and amount of information in the series, yet enhances the texture of the mid to high range. Due to Sansui's unique α-X balance circuit, it is an attractive car with a high sense of signal and a clear outline. There is a feeling of wear on the exterior such as scratches and dullness. Serial 64611138 (Jun Tamai)
Maintenance information: 2024.6.21 maintained (switch disassembly/polishing/grease application (tone, turnover, source direct, subsonic, muting, loudness, processor, power amplifier direct, MM/MC, input selectors) output relay headphone relay replacement bias adjustment volume replacement solder repair/main volume/other volume switch cleaning interior and exterior Inspection and cleaning DC/bias adjustment operation confirmation)
Accessories: copy of instruction manual
Main specifications: effective output 190W+190W (6Ω) 180W+180W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 28.0 kg
The disposal price has been reduced. Member prices are not applicable. 2024/4/17 sales price 128,000 yen Maintained! Quad control amplifier The famous machine 44 has been refreshed by changing the back terminal to an RCA specification that is easy to handle. It's a perfect balance between freshness and richness. When paired with speakers made in England, you can enjoy a calm, high-quality sound (Daiki Goto)
Maintenance information: 2024.4.17 maintained (internal all check, B-filter capacitor deterioration, +- 18V drive Tr leak large, rectifier diode failure instability → replacement power SW spark killer broken → replacement. C and R checks within each board. *There is a sound leak at main volume 0. (Create 2 1.5m DIN5 cables)
Accessories: copy of instruction manual, power cable, connection cable
Main specifications: 2 LINE inputs, 1 PHONO input, 1 phono sensitivity, 1m/3m/10mV switching, W321×H103×D203 mm
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. There is a feeling of use, such as a line scratch on the corner, a break in the transport lock fixing parts, etc. Serial MZ009345020052 (Takasaki Atsushi)
Maintenance information: 2024.7.6 sound output confirmed
Accessories: remote control, instruction manual, 2 transport lock screws
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
The price has been drastically reduced. 2024/7/1 sales price 118,000 yen The 704, which is an upgraded model of the CDM-7NT, has arrived! A tall boy speaker with high cost performance. You can fully enjoy the B & W sound, which is deep and has a wide sound field. The sound quality is mild and has a high texture, so you can listen to it regardless of the source. Bass reflex sponge is out of stock. The exterior is generally good, although there are line scratches on the lower rear on one side (Ryo Mizusaki)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: instruction manual, jumper plate, spikes, rubber feet
Main specifications: 2.5-way bass reflex playback frequency band 30Hz to 50kHz output sound pressure level 90dB impedance 8Ω dimensions W222 x H957 x D319 mm weight 21 kg/book
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 62226 (Yonejima Satoshi)
Maintenance Information: 2024.3.25 Maintained (INPUT DIN 4P replacement, internal Tr, C, R all checks. DIN4P-RCA female cable created. Operation check, pattern solder processing)
Accessories: power cable, connection cable
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
Maintained! This is a limited edition model that appeared as a gold version of the CD-94. The sound that can be heard by the combination of the CDM-1 mechanism and the TDA1541 multi-bit DAC makes me feel the high level of analog-like musicality while having a diverse amount of information. The exterior is in a state where there are many signs of use, such as dullness and scratches over time. Serial MZ02722110037 (Yamato Yuki)
Maintenance information: 2024.6.13 maintained (tray slide motor belt, CD standby motor belt replacement, bypass C replacement in other servo boards, operation check)
Accessories: none
Main specifications: 1 analog output, 1 digital output, 1 optical and coaxial systems, dimensions W462 x H104 x D355 mm, weight 12 kg