An improved model of the ES-10. 2-lock pin construction. It is a casually elegant shell with a silver body and champagne gold fingers. There is a feeling of use on the exterior due to scratches, dullness, dirt, etc. (Jun Tamai)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: none
Main specifications: dead weight 12g
It is a model commemorating friendship with WADIA in the United States, and WADIA is in charge of the D/A conversion section and analog board. It has a unique character that is different from other domestic CD players, and the high frequencies extend clearly, and you can hear clear sounds, and I feel that the sound output is very bright. The exterior has dents and line scratches on the front side of the top plate, and there is a feeling of use such as deterioration visible inside the tray (Mizusaki Ryo)
Maintenance information: 2024.7.7 operation confirmed
Accessories: remote control, power cord, spike holder
Main specifications: digital input/output terminal, coaxial RCA, 1 optical TOS system, 1 analog output terminal, 1 RCA, XLR system each, equipped with a VRDS (CMK3) mechanism W465 x H157 x D390 mm 14.5 kg
Power cable 1.5m 7N copper conductor, custom-made plug and connector using stress-free treated beryllium copper, an advanced model of the company's power cable. The clear tone without stagnation and the sense of sound pressure are amazing. There is a fine scratch on the plug cover (Kojima Yosuke)
Accessories: none
The disposal price has been reduced (member prices are not applicable). 2024/6/28 sales price 498,000 yen Maintenance including pickup replacement has been completed by the manufacturer in 2022! Esoteric heavyweight SACD transport P-03 It is equipped with a VRDS-NEO mechanism for high-end use, and the power supply part and mechanism part have a completely separate structure with a strong chassis. The balance is so good that it surpasses advanced models, and in particular, you can enjoy the low frequency resolution and attack strength at the highest grade. There is a small scratch on the front and dirt on the top plate and remote control (Ryo Mizusaki)
Maintenance information: 2022.1.28 Manufacturer maintained (belt, gear, shutter mechanism gasket, flat cable consumable parts replacement, and pickup replacement was carried out because the RF output level of the pickup was at the lower limit of the specified value. Other mechanical parts were disassembled, inspected, lubricated, and each part was inspected and adjusted.)
Accessories: remote control, copy of instruction manual, power cord
Main specifications: Playable media with DSD conversion function Super Audio CD, CD, CD-R, CD-RW digital output i.LINK x 1/XLR x 2/RCA x 1 word sync input BNC x 1 W445 x H159 x D420 mm 30 kg
※Inexpensive because there are scratches on the top plate and edge on one side. This is the newest bookshelf in the Focal Tiba series, which will be introduced for the first time in Hi-Fi. Clear and well-balanced sound is achieved with the company's proprietary TNF tweeter and slateFiber diaphragm driver (Murakoshi Yoichi)
Maintenance information: 2024.7.4 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 2 way 8Ω 89dB W212 x H392 x D260 mm 7 kg
Unused item in a set of 2. 24K gold-plated coated RCA plug It is a type that can be used for both soldering and screwing, and the hot part uses a screw fastening type with a hexagonal screw. A collet chuck type is used to connect to the RCA jack to prevent falling off and achieve reliable contact (Kobayashi Hitoshi)
Accessories: none
The price has been reduced. 2024/7/2 sales price 22,000 yen FOSTEX horn tweeter FT50H. It plays a role in expanding sound and improving the reproducibility of space. There is dullness and seal marks (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: ferrite magnet impedance 8 ohms frequency band 5000 to 35000 Hz maximum input 50 W output sound pressure 102 dB recommended crossover 7 Khz W60 × H70 × D70 mm
※It is glued to the pedestal. A horn tweeter with an Alnico magnet, horn type, and attractive specs with high efficiency. It is sharp and has excellent penetrating power. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: Hard aluminum alloy diaphragm, Alnico magnet, frequency characteristics, 5kHz to 35kHz, impedance 8Ω, output sound pressure level, 106 dB, recommended crossover, 7 kHz, baffle opening dimensions: 61 mm, weight: 720g
Bookshelf speaker with built-in power amplifier A bi-amp system is used in which the high and low frequencies are driven by separate power amplifiers. You can enjoy powerful, high-quality sound by connecting to a smartphone or flat screen TV. Since it is cheap, it will be sold as is. There is a line scratch on the cone paper on one side. (ASAINE Tomonori)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: none
Main specifications: built-in power amplifier output 18W x 2 aperture 100mm woofer with 19mm soft dome tweeter playback frequency 60 Hz to 30000 Hz crossover 1500 Hz W144 x H220 x D 180 mm weight 3.5 kg
This is a brass tweeter stand for the company's T900A, T925A, and T90A. The tweeter can be stably placed on top of the speaker system. The exterior has small scratches, paint bald spots, dullness, etc. (Hiura Katsuji)
Accessories: none
Main specifications: W65 x H20 x D91 mm weight 471 g
A full-range unit from Stereo magazine's 2016/8 appendix. Uses Fostex's first aluminum cone diaphragm and center cap. It is characterized by the sound's ability to stand up and sharpness (Murakoshi Yoichi)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: original box, mounting screws, gasket
Main specifications: 8cm full range unit impedance 8 ohms minimum resonance frequency 105 Hz sound pressure level 82.5 dB
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
Comes with a pedestal. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There is an entry in the manual (Tamura Eiji)
Maintenance information: 2024.7.3 oscillator check OK
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
The disposal price has been reduced! Member discounts are not applicable. 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
The outer insulation for the 1.5m RCA terminal of the digital cable is flexible PVC. It's an orthodox cable with no quirks. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: none
The outer insulation for the 1.5m RCA terminal of the digital cable is flexible PVC. It's an orthodox cable with no quirks. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: none
PSE standard FURUTECH inlet plug is a non-magnetic design using gold-plated copper screws and stainless steel parts that conform to UL standards. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
※ One lock screw is missing, so it's cheap (there are no problems with use) Gun-type banana plugs, set of 4, rhodium-plated, and a safety cover is hung on the main part, and the terminal connection part is structured to tighten the conductor with 2 M2 size hex screws (Tamura Eiji)
Accessories: case
Pair tube made in the USA side getter measurement value 62/58 (critical value 30) with JAN original box ※ The pair is determined based on GM value measured by the tester TV-7 (Yosuke Kojima)
Accessories: original box
Set of 2 (the internal shape seems to be the same, but the manufacturer country print is different (made in Canada/USA), so they are not treated as a pair), brown base measurement value 44/42 (rejected value 25), getta burns, and decreases) *Measured values indicate GM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 79,800 yen A dedicated arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
Goodman ARU is in stock. It comes with a rare original nameplate. If you use a designated box such as an Axiom80 and don't have ARU, please take this opportunity to try it out. There is a slight crack (Kobayashi Hitoshi)
Accessories: none
Main specifications: W374 x H248 x D35 mm
The degree is good! Lots of accessories! Grace wood-framed tone arm The material is an arm with high processing accuracy that looks like Grace using tender teak wood. The support method is an oil dump with one-point support, and the head shell part is a replacement method with a special shell. It is for cartridges with relatively light needle pressure. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.7 continuity confirmed
Accessories: instruction manual, connection cord, original box, cartridge mounting plate, mounting template, stop screw
Main specifications: static balance, one-point support, oil dump type, effective length 237 mm, compatible cartridge 4 to 13 g, needle pressure range 0 to 3 g
Sound can be produced, but there is uneven rotation and sound cracking, so it will be sold as it is. The volume is not loud, but it has a soft tone that creates a nostalgic atmosphere. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 Operation confirmed
Accessories: handle, paper horn
Main specifications: W278 × H78 × D300mm 3.7kg (actual measurement)
Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. The screw holder on the reinforcing column rotates idle and the screw cannot be stopped completely. There are blows and scratches on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H600 x D550 mm Weight 31.5 kg
The price has been reduced! 2024/7/5 sales price 34,800 yen Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. The screw holder on the reinforcing column rotates idle and the screw cannot be stopped completely. The exterior has small scratches, dullness, and dents (Tomonori Asaine)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H600 x D550 mm Weight 31.5 kg
Set of 4 Block shape with R processing on one side of the front. The outside of the speaker fits both R-type and square-shaped types. It has a sturdy design and natural sound quality that brings out the goodness of wood. The exterior has small scratches and a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: W90 x H180 x D320 mm 3.5 kg/bottle
This is a 4-tier rack with GS-601 attached to Hayami's popular rack GS-611. You can remove the GS-601 and use it as a 3-tier according to your preferences. Since it has a sturdy construction, it is an ideal car for heavyweight amplifiers, etc. There are bumps and small scratches. One cap to hide the screw hole on the top is missing (Sasaki Shota)
Accessories: none
Main specifications: GS-611: W627 x H523 x D584 mm weight 38.05 kg load capacity: top plate 150 kg shelf board 50 kg bottom plate 150 kg GS-601: W625 x H270 x D570 mm weight 12.1 kg
This is only the top plate part of the company's GT-9721. There are scratches, stains, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W1165 x H45 x D580 mm
Modern design open rack. This is a high class AV rack with black aluminum frame legs. The exterior has small scratches and a feeling of use (Hiura Katsuji)
Accessories: none
Main specifications: W1150 × H475 × D450 mm 41 kg
Hamilex speaker stand The large, calm dark brown wood grain and black two-tone design are stylish. It is made with a firm sense of stability, and is also recommended as an introduction. Other than the exterior and the rubber on the top plate being partially missing, there are no noticeable scratches, etc., and it is good with just about dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: W280 x H446 x D340 mm Top plate size W200 x D270 mm approx. 5 kg/unit
Reasonably priced speaker stand from Hayami Industries. It is designed for installing small speakers. Since it is lightweight, you can easily change the position of the stand, and it is an easy-to-use stand. There is a feeling of use on the exterior, such as dullness or small scratches (Asaine Tomoho)
Accessories: none
Main specifications: bottom plate dimensions W230 x H450 x D295 mm, top plate dimensions W190 x D230 mm, weight 4 kg/book
HAMILEX speaker stand. Depending on how the connection plate is attached, the width is 330 mm and 300 mm, and installation is possible by changing the direction of height and depth. It's just the right size for a medium sized speaker such as the Yamaha NS-1000M. There is a scratch on the bottom of the exterior (Yonejima Satoshi)
Accessories: No accessories
※Comes with a dedicated stand. You can enjoy the smooth, beautiful sound unique to British BBC monitors. As expected, there is plenty of noise regardless of genre, from jazz and classical music to rock and pop music. It captivates with just the right amount of box noise and a design that has guests. There are some scratches on the exterior. Serial 4732 (Fujisawa Yukishi)
Maintenance information: 2024.7.7 operation confirmed
Accessories: instruction manual, stand, original box (speaker only)
Main specifications: 2-way 2-speaker bass reflex system unit, 20 cm cone type for low range, 2.5 cm dome type playback frequency band 43 Hz to 20 kHz output sound pressure level 86 dB impedance 8 Ω maximum input 150 W W271 x H520 x D315 mm 12.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/7 sales price 89,800 yen ※The woofer cone is highly deformed, so it's cheap. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen There is no problem up to PCM384 kHz, but when USB/I2S is input, a noise called Zar is regularly added along with the sound due to DSD64/128 playback, so it is currently sold at a low price. D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 148,000 yen Speaker that has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
The price has been reduced. 2024/6/11 sales price 15,000 yen*Inexpensive due to poor condition. Currently sold. This is a tall boy model of the Reference41MKII. The tuning focuses on the mid-range, so you can enjoy it regardless of genre. You can see a feeling of use on the exterior, holes in the saran net, peeling veneer, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, 10W to 150W, 20 cm cone type, 10 cm cone type, medium range, 1 cm dome type, W254 x H870 x D307 mm, 16 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
※Saran net is out of stock, so it's cheap. Maintained with edge replacement! Infiniti's best-selling speaker. It's a 3-way system that pulls out quite a bit of volume for a tall boy type. The bass is also sufficiently reproducible with a sense of scale coming out of the double woofer, and even pipe organs can be reproduced with plenty of room. You can see a feeling of use on the exterior, sunburn, dullness, spots, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.6 maintained (edge replacement, unit detachment, exterior cleaning)
Accessories: jumper
Main specifications: 3-way system frequency characteristics 35 to 450,000 Hz crossover 250/3,500 Hz 6 ohms W390 × H1200 × D380 mm 40 kg
Pair tube (checked with a tube checker) beam quadrupole. There is a tea box. Measured value 36,34/30 (rejection value) *The pair was determined based on the GM value measured by the testing machine TV-7. The ※ logo is scratched, so it's a bargain.
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
J1-Project high polymer primary rack. High-tech materials with excellent characteristics such as noise reduction, resilience, and impact resistance are used for the shelves. We are thoroughly particular about every part of the primary rack we have adopted, and it is a true sound quality priority design without compromise that takes thorough vibration countermeasures into account. There is a feeling of use on the exterior such as scratches and dullness (Tamai Jun)
Accessories: none
Main specifications: size W670 x H210 x D540 mm
By placing it between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Tamai Jun)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle