Choke transformer inductance 10H/120mA W75 x H91 x 69 mm 1.5 kg (actual measurement, terminal part not included) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
Choke transformer inductance 10H/120mA W75 x H91 x 69 mm 1.5 kg (actual measurement, terminal part not included) There are scratches and paint peeling (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/6/30 sales price 8,000 yen. Speaker cable 2.0m pair ends untreated. It is a cross insulated structure with an air layer called CIS as a damper, and the sound quality is flat and natural without any habit. I think you can use it regardless of genre. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
HAMILEX speaker stand. Depending on how the connection plate is attached, the width is 330 mm and 300 mm, and installation is possible by changing the direction of height and depth. It's just the right size for a medium sized speaker such as the Yamaha NS-1000M. There is a scratch on the bottom of the exterior (Yonejima Satoshi)
Accessories: No accessories
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
Set of 4 Block shape with R processing on one side of the front. The outside of the speaker fits both R-type and square-shaped types. It has a sturdy design and natural sound quality that brings out the goodness of wood. The exterior has small scratches and a feeling of use (Hiroki Aso)
Accessories: none
Main specifications: W90 x H180 x D320 mm 3.5 kg/bottle
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. The safety wire is broken. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. On the exterior, there is a feeling of use, such as cracks, fading, abrasions, etc. on the main body (Kanai Hidetsugu)
Maintenance information: 2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Pair tube (checked with a tube checker) beam quadrupole. There is a tea box. Measured value 36,34/30 (rejection value) *The pair was determined based on the GM value measured by the testing machine TV-7. The ※ logo is scratched, so it's a bargain.
Set of 4 This is a silver pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Hamilex speaker stand The large, calm dark brown wood grain and black two-tone design are stylish. It is made with a firm sense of stability, and is also recommended as an introduction. Other than the exterior and the rubber on the top plate being partially missing, there are no noticeable scratches, etc., and it is good with just about dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: W280 x H446 x D340 mm Top plate size W200 x D270 mm approx. 5 kg/unit
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
※The sound output has been confirmed, but the damper seems to have deteriorated, and the model name printing has disappeared, so it's cheap. EMPIRE MI cartridge. The tone is sharp and rich in shadows. I have the impression that if you apply light needle pressure, the luster will increase and you can enjoy it all round (Hiura Katsuji)
Maintenance information: 2024.7.4 sound output confirmed
Accessories: none
Main specifications: MI type 5 mV needle pressure 0.25 to 1.25 g dead weight 8 g
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg
Comes with original box and hex wrench Set of 4 banana plugs, silver and rhodium plated in phosphor bronze, these banana plugs have a beautiful direct plating design. You can also increase the resolution on your own system. There is dullness and small wounds (Tamura Eiji)
Accessories: original box, hex wrench
216mm pole (19mm diameter) set of 4 silver color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions, line scratches, and paint peeling in places (Murakoshi Yoichi)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/7/31 sales price 15,000 yen*Currently sold. It is a 2.1 channel speaker system that perfectly matches Bose's unique compact, high-performance speaker technology with bass reproduction technology. You can easily enjoy the simple 2.1 channel. The exterior has cracks in the woofer cabinet, dullness, and small scratches throughout. Serial 990701 (Yonejima Satoshi)
Maintenance information: 2023.7.31 operation confirmed
Accessories: No accessories
Main specifications: rated input 100W impedance 6Ω satellite speaker 6.0cm driver x 2 anti-magnetic type W78 x H157 x D104 mm 1.1 kg subwoofer 13 cm drivers x 2 W485 x H358 x D192 mm 9.1 kg
Balance cable 1.0m pair stress-free 6N conductors Sound quality that is thicker than AcroLink and has a natural texture that shines with good balance. It is a character that is compatible with a wide range of devices. In addition to cracks in the exterior and plug, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member prices are not applicable) 2024/5/9 sales price 15,000 yen balance cable 3.0 m pair oxygen-free copper OFC Ritz wire type 2 core shield structure. It is a quiet and beautiful sound without falsehood that excludes camouflage. The exterior has a feeling of use such as dullness and scratches on the plug (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
*Currently sold. It is inexpensive because the left and right shapes, the color of the cone paper and back logo, and model year are different. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6Ω maximum input 150W output sound pressure level 86db W232 × H154 × D172 mm 2 kg
The price has been reduced. 2024/6/26 sales price 12,800 yen It's a high range with a wide range, and a low to medium range with a sense of volume that you wouldn't think of it as a compact speaker. The speaker has a simple design and is easy to match with the interior. There are small scratches, dullness, etc. on the exterior (Asaine Tomoho)
Maintenance information: 2024.6.27 Operation confirmed (good sweep test)
Accessories: saran net
Main specifications: impedance 6 ohms maximum allowable input: 80 W (JEITA) 120 W (PEAK) frequency band 45 Hz to 60 kHz crossover frequency 2 kHz 6 Ω size W180 x H270 x D165 weight 3.7 kg
VCYOYO (Mitsuke Seiki) spacer for SMEs. It is used to match the height when combining GARRARD and SME tonearms. Made of brass with a focus on sound quality. There is a light scratch on the back of the attachment (Murakoshi Yoichi)
Accessories: none
Main specifications: Height approx. 9.5 mm
The price has been reduced! 2024/6/27 sales price 12,800 yen Easy to use 2P type 6-port tap. Suitable for PSE standard audio systems up to mid-level. The exterior is dull and has small scratches. Serial 814001 (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Main specifications: Power cable section 1.8 m
This disc stabilizer uses a “reversible structure” that allows both the front and back sides to be used. You can enjoy 2 types of sound quality depending on your preferences. High sound quality design with brass (special gloss finish) and damping rubber “Honeynight”. The exterior is dull, slightly scratched, etc. (Asaine Tomoho)
Accessories: none
Main specifications: H44 x W123 x D123 mm approx. 750 g
The price has been reduced! 2024/5/8 sales price 12,000 yen ※The exterior is in poor condition, so it's cheap. 1 bottle only Altec green horns were also used in the early A7. While it has wide diffusion characteristics, it is an attractive horn because it is easy to listen to where you can feel the core. The exterior is dull, scratched, and peeling paint (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 800Hz crossover frequency compatible driver 802-8D, 806-8A, 807-8A W470 × H220 × D340 mm 4.1 kg
Comes with original box and hex wrench Set of 4 Y lugs Oyaide's screw-fastening Y lug terminals are made in Japan with excellent processing accuracy. This is a high quality sound plug that provides a wider range and a sense of density. There is little feeling of use (Oikawa Tetsuji)
Accessories: original box, hex wrench
Main specifications: Dual screw clamp system, pure domestic copper alloy (RoHS compatible), pure silver plating (1.5 μm) + platinum plating (0.3 μm), inner diameter 8.0 mm, compatible cable diameter 4.0 mm
The disposal price has been reduced. Member discounts are not applicable. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
Tawk's thin audio board. Sandwich structure with high density wood board, surface material, and back surface material centered around a honeycomb core containing cast iron powder. It is a heavy board that combines high rigidity, high specific gravity, and high vibration damping properties, and suppresses floor softness. “W” type with warm, soft sound quality. The exterior has scratches, dents, cracks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W495 x H26 x D445 mm 6 kg
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
High end outlet plug. The socket blade is a hybrid high-durability plug with palladium 0.3 microns plated on 3 microns of gold.
Accessories: nothing
Main specifications: cable compatible outer diameter up to 15 mm, wire compatible diameter up to 2.0 SQ
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The price has been drastically reduced. 2024/6/19 sales price 12,000 yen. Made of ultra-short horn plastic with 2 screw holes It is said that the previous owner used it on the Altec 802. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch 75mm, throat diameter 96mm, W160 x H160 x D110 mm (actual measurement)
The price has been reduced. 2024/3/3 sales price 12,000 yen*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has bumps, scratches, and dullness. Also, there is a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep test is good
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Wooden 5-tier rack with casters from unknown manufacturer. The weight is light, and the shelves inside can also be adjusted with dowels, so it seems easy to use. The exterior has scratches, dullness, etc., and signs of use and installation marks (Ryo Mizusaki)
Accessories: none
Main specifications: W580 x H1290 x D470 mm weight 41 kg (actual measurement)
Large insulator of unknown manufacturer with a diameter of 60 mm and a height of 20 mm. There are holes for screws, so it seems that it can be diverted to amplifiers, players, etc. The finish and construction are solid. There are small wounds and dullness (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 60mm, height 20mm 425g/piece
RCA cable uses 1.5 m pair of out-of-print conductors and single crystalline high-purity oxygen-free copper PCOCCC with theoretically zero crystal boundaries for all core wires, braided wires, and plug pins. The shield is rolled up on the plug attachment part, it is dull, and there is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.3 continuity confirmed
※Since the video system has not been checked, it is being handed over as is. Pioneer's thin AV receiver. High-efficiency Class D amplifier technology developed by Pioneer is used to enable realistic multi-channel playback. Windows 8 certified, DLNA 1.5 compliant, equipped with a variety of network functions. It is full of useful features, such as Air Play compatible, 192 kHz/24 bit high resolution sound source support (FLAC/WAV/AIFF/Apple Lossless compatible, etc.) There are scratches on the exterior. Serial MJID000387JP (Fujisawa Yukishi)
Maintenance information: 2024.7.6 operation confirmed (HDMI and video not checked)
Accessories: remote control, power cord
Main specifications: output 65W (when driving 8ohm/1ch) W435 x H85 x D316 mm 4.1 kg
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
It is a ferrite type commonly known as a ferrite-type gun used in the company's SB-65. While the sound quality is soft and straightforward, it also has just the right amount of power, so I think it's suitable for jazz. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: 20cm full range 8Ω screw pitch (diagonal) 194 mm (actual measurement)
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. There are no noticeable scratches, but the needle cover is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: instruction manual, original box
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g