The disposal price has been reduced. Member prices are not applicable. 2024/6/29 sales price 298,000 yen Maintained including 2ch/4ch heads. 4TR-4ch head unit JT-2044T included! A tape deck with a separate design that completely separates the tape transport and control amplifier. It uses a tape speed of 38 cm/s, has wide frequency characteristics and dynamic range, and achieves a high signal-to-noise ratio. A size 10 reel can be used. It is also compatible with the 4ch stereo that was popular at the time (another TAU-11 is required). The exterior has scratches, dullness, and corrosion appropriate to the model year.
Maintenance information: 2024.6.25 Maintained (mechanical partial cleaning, oil grease application, counter belt replacement. Transport part volume contact cleaning, switch contact disassembly cleaning. Replace 40 amplifier deterioration tongisters and adjust playback and recording levels. Mirror polishing treatment due to surface rust and wear steps on the recording and playback head. 4TR,2TR head maintenance completed. (Refill 3 missing attached pin cords, replace power cords due to deterioration)
Accessories: 4TR-4ch head unit JT-2044T, connection cable, power cable
Main specifications: 38 cm/s, 19 cm/s compatible frequency characteristics: 38 cm/sec: 30 to 28,000 Hz 19 cm/sec: 40 to 20,000 Hz RTU-11: W460 × H411 × D246 mm 22.3 kg TAU-11: W460 × H141 × D246 mm 5.2 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
The price has been reduced. 2024/4/29 sale price 24,800 yen A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
The price has been reduced. 2024/6/26 sales price 79,800 yen DALI's popular tall boy model. The high quality real wood finish exudes a sense of luxury. It features a mild, high-grade tone with a high texture, and demonstrates its strengths in acoustic sounds and female vocals. Exterior, the saran net is extremely hard to attach and detach, so there are cracks in the dowel hole in one place, and a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.26 Operation confirmed
Accessories: instruction manual, saran net, jumper, spike, spike holder
Main specifications: 3 way 3 speakers, frequency characteristics, 43 Hz to 25 kHz, crossover, 3.4 kHz, sound pressure level, 90 dB, impedance, 4 ohms, W170 x H845 x D220 mm, 11.7 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The price has been reduced. 2024/6/11 sales price 15,000 yen*Inexpensive due to poor condition. Currently sold. This is a tall boy model of the Reference41MKII. The tuning focuses on the mid-range, so you can enjoy it regardless of genre. You can see a feeling of use on the exterior, holes in the saran net, peeling veneer, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.11 Operation confirmed
Accessories: saran net
Main specifications: 3 way, 3 speakers, bass reflex system, tall boy type, 10W to 150W, 20 cm cone type, 10 cm cone type, medium range, 1 cm dome type, W254 x H870 x D307 mm, 16 kg
This is an acrylic RECORD STABILIZER with a retro design. It also creates a glamorous appearance (Murakoshi Yoichi)
Accessories: none
Main specifications: height 50 mm diameter 70 mm weight 229 g (actual measurement)
The price has been reduced! 2024/7/3 Rotel's high-end CD player with a sales price of 89,800 yen. Equipped with the Wolfoson WM8740 DAC chip with 192 kHz/24 bit resolution, you can enjoy clear, natural, and high-resolution sounds. *Remote control is not included. The exterior is good with no noticeable scratches. Serial 751-0461033 (Yonejima Satoshi)
Maintenance information: 2024.7.3 operation confirmed
Accessories: power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
Unused item in a set of 2. 24K gold-plated coated RCA plug It is a type that can be used for both soldering and screwing, and the hot part uses a screw fastening type with a hexagonal screw. A collet chuck type is used to connect to the RCA jack to prevent falling off and achieve reliable contact (Kobayashi Hitoshi)
Accessories: none
J1-Project high polymer primary rack. High-tech materials with excellent characteristics such as noise reduction, resilience, and impact resistance are used for the shelves. We are thoroughly particular about every part of the primary rack we have adopted, and it is a true sound quality priority design without compromise that takes thorough vibration countermeasures into account. There is a feeling of use on the exterior such as scratches and dullness (Tamai Jun)
Accessories: none
Main specifications: size W670 x H210 x D540 mm
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
* Black 3-tier type with detachable spikes In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and is slightly curved and cut so that vibration components gather at the four corners. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: spikes
Main specifications: size W395 x D395 x H595 mm, 320 mm from above shelves, 140 mm (actual measurement)
The disposal price has been reduced! (Member prices are not applicable) 2024/6/27 sales price 25,000 yen Kef bookshelf type speaker. You can enjoy the unity and breadth of sounds unique to coaxial 2-way. There is a feeling of use such as a tear or scratch on the saran net. Serial QQ10040583F02NGJ QQ10040583F02NGJ (Tamai Jun)
Maintenance information: 2024.6.27 sound output confirmed
Accessories: saran net
Main specifications: size W180 x H300 x D272 mm 5.9 kg (1 bottle) 8 ohms
The price has been reduced. 2017/10/6 sales price 3,000 yen This is a speaker mounting bracket when using the speaker system PS-S200 series etc. as a ceiling suspension. There are spots, rust, and small scratches on the exterior. One single-sided pin is missing (Wang Exhibition)
Accessories: none
Main specifications: compatible models PS-S224W/WH, PS-S226W, PS-S203W, PS-S204W, PS-S207W,
PS-S550W, PS-S552W, PS-S553, etc. Load capacity 12 kg, angle adjustable 1.13 kg
The price has been drastically reduced. 2024/6/30 sales price 378,000 yen It is cheap because there is a line scratch on the side. Clean power supply up to 1200VA. It improves power supply waveforms polluted by noise and distortion, improves SNR, and expands sound field space. It has a large number of ports and is ideal for connecting multiple players and amplifiers. There is a scratch near the power switch (Daiki Goto)
Maintenance information: 2024.6.30 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: maximum output 1200 VA (W), 3 pins x 6 ports, 2 pins x 2 ports, W465 x H243 x D500 mm, 38.9 kg
The price has been reduced! 2024/4/5 sales price 500 yen The sound quality of only one 2.0m QED speaker cable feels thick and flexible throughout the entire range. You can use it regardless of genre. The exterior is good with no conspicuous scratches (Tomoho Asae)
Maintenance information: 2024.4.5 continuity confirmed
Accessories: none
By placing it between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Tamai Jun)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
Sound can be produced, but there is uneven rotation and sound cracking, so it will be sold as it is. The volume is not loud, but it has a soft tone that creates a nostalgic atmosphere. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 Operation confirmed
Accessories: handle, paper horn
Main specifications: W278 × H78 × D300mm 3.7kg (actual measurement)
Maintained by the manufacturer in November 2021! The last limited version in the S10 series. The well-built structure, which weighs 29 kg, is directly linked to the sound. It is a powerful machine that has an excellent driving feel and can easily drive even large woofers. Compared to recent modern models with a thin mid-low range, the driving power with a clear sense of energy is attractive. There are scuffs and scratches on the exterior. Serial 2031500557 (Fujisawa Yukishi)
Maintenance information: 2021.11.19 manufacturer maintained (MM/MC changeover switch, protection circuit relay RL401,2 replaced. Input selector switch disassembly, contact polishing cleaning. Tone switch contact reviver treatment, printed circuit board solder crack soldering correction, bias current adjustment, sound output test, and other inspections)
Accessories: power cord
Main specifications: 100W+100W UHC single push circuit high rigidity chassis W434 × H181 × D485 mm 29 kg
Maintained by Denon! Denon's mid-tier Primain second-generation model. A sound with firm lines with a sense of stability that further pursues “subtlety” and “strength” from the first generation. It is compatible with various speakers, and the biggest appeal is the sense of energy in the mid to low range, which surpasses the 2000 number in recent years. It is an easy-to-use model that is compatible with both records and MM/MC. There are small scratches on the exterior. Serial 9127307236 (Fujisawa Yukishi)
Maintenance information: 2024.7.5 manufacturer maintained (source direct SW contact cleaning. Other, input selector switch, disassembly contact cleaning. Fixed poor contact between MM/MC switching SW. idling adjustment. Other, inspection)
Accessories: power cord
Main specifications: 80W+80W (8Ω) PHONO (MM/MC switching) LINE 6 system W434 x H180 x D478 mm 22 kg
The price has been drastically reduced. 2024/2/18 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. Serial AWY15180500756 There are scratches on the top plate on the exterior (Hiura Katsuji)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: remote control power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The 1.5m PSE standard power cable is sharp, but the increase in S/N speed is not deliberate and I like it. When I held it, it was heavy and had a sense of luxury. There was rubbing and dirt around the plug (Kojima Yosuke)
Accessories: none
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
Maintained by the manufacturer in March 2023! This model was developed by introducing technology from the conventional PM-11S3. It is a premain amplifier with a high degree of perfection, such as a smooth high frequency with high SN, a low range with a rich sense of volume, and a sound field space with an excellent sense of depth. As for the exterior, there are some scratches on the top plate. Serial 15001339000002 (Fujisawa Yukishi)
Maintenance information: 2023.3.13 Maintained by the manufacturer (replacement of defective transistors, other inspections and adjustments)
Accessories: remote control, instruction manual, power cord
Main specifications: 90W+90W (8Ω) 140W+140W (4Ω) Phono input 1 system (MM/MC) line input 3 systems W440 x H123 x 457 mm 18.5 kg
The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
Maintained, including the creation of a new dust cover. Comes with a SHURE M44G cartridge+PICKERING AS-2PS headshell, so you can enjoy it right after purchase. In addition to its thick, thick, and heavy sound quality, it is also equipped with an oil dump arm similar to the P-3 and an auto lift-up function, and it boasts overwhelming cost performance compared to current players in the same price range. The exterior, dullness, and feeling of use can be seen, but there is no noticeable damage (Kobayashi Hitoshi)
Maintenance information: 2024.6.30 Maintained (end sensor circuit tantalum capacitor replacement, end detection operation check)
2024.6.9 Maintained (arm disassembly grease wipe clean. Connector replacement. Electrolytic capacitor replacement. Each rotation lock adjustment. Arm operation, voice check. (Create a new dust cover)
Accessories: copy of instruction manual, adapter, oil case, SHURE M44G, PICKERING AS-2PS
Main specifications: Quartz PLL DC servo hole motor turntable diameter 31 cm 33/45 rotation oil braking system static balance S-shaped pipe arm compatible cartridge dead weight 4 g to 13 g W490 x H190 x D401 mm 15 kg
Maintained! A CD/SACD player compatible with many formats in the high-resolution era. It is a higher-level model that incorporates a lot of technology, and the built-in 32 bit/192 kHz DAC allows you to enjoy pure sound with a wide range during SACD playback. It is designed with high sound quality for CDs and compressed files, so it is recommended for those aiming for high sound quality in any format. The exterior is good with no noticeable scratches (Ryo Mizusaki)
Maintenance information: 2024.6.28 Maintained (check for abnormal noise when opening the tray. Loading part dismantling, grease replacement, lens and disc table cleaning. I played each disc and checked analog, USB, and S/PDIF sounds)
Accessories: remote control, instruction manual, power cord
Main specifications: 32 bit/192 kHz twin D/A converter jitter reduction IC twin power transformer damper tray equipped with CDR-R/RW (MP3 MPEG-4 AAC WMA), DVD-R/RW (DSD [DSD disk], MP3, MPEG-4, AAC, WMA), iPod, iPhone, and iPad compatible W435 x H130 x D329 mm weight 7.8 kg
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
Standard plug to mini jack plug adapter. A microphone with a mini plug can be used as a microphone terminal on a tape deck, etc. (Mizushima Itsuro)
Accessories: none
A sharp Japanese vintage coaxial 2-way unit that uses a wide-angle cellular horn for the high range. If you supplement the low range with a bass reflex enclosure rather than tightening it up with an airtight seal, it seems that the level will increase dramatically throughout the entire band. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: 25cm coaxial 2-way 8Ω 95dB crossover 3.5kHz baffle opening 215φmm or 263φmm diameter 290 φmm depth 115mm 3.9 kg
Maintained! The culmination of Paragon, late model D44000WXA. The design created by Arnold Wolff is of course undisputed, but Paragon is wonderfully well thought out when it comes to sound quality, and it transcends the line for audiophiles. The combination of the reverberation of each unit and the late enclosure is the final form Paragon aims for. The beautiful way of making a plump, floating sound is unique (Yamato Yuki)
Maintenance information: 2024.5.31 maintained (exterior cleaning/repair/gloss adjustment, horn paint black paint woofer back grill repair driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement) ATT cleaning unit detachable)
Accessories: none
Main specifications: D44000WXA low range 38cm cone type LE15H+ medium range horn type 376+H5038p+ high range horn type tweeter 075 network LX5+N7000 crossover 500Hz/7000 Hz impedance 8Ω output sound pressure level 96dB allowable input 125W size W2640 x H902 x D740 mm weight approx. 300 kg
Bookshelf speaker with built-in power amplifier A bi-amp system is used in which the high and low frequencies are driven by separate power amplifiers. You can enjoy powerful, high-quality sound by connecting to a smartphone or flat screen TV. Since it is cheap, it will be sold as is. There is a line scratch on the cone paper on one side. (ASAINE Tomonori)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: none
Main specifications: built-in power amplifier output 18W x 2 aperture 100mm woofer with 19mm soft dome tweeter playback frequency 60 Hz to 30000 Hz crossover 1500 Hz W144 x H220 x D 180 mm weight 3.5 kg
Comes with a rare original box. It is a famous unit for guitar amplifiers. The rich, clean mid-high range unique to Alnico is attractive. It also responds quickly and has a warm texture. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: original box
Main Specifications: Alnico Magnet 8 inch 8 Ohm 92.5 dB 25W W213 x D59 mm 2 kg
Set of 4 Use ICP damping spacers and IDS composites together as tuning goods to counteract speaker vibrations. *Cannot be used as a receiver for metal spikes. There are scratches and threads on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: diameter 35 mm x 3 mm (thickness)
The price has been drastically reduced! 2024/6/24 sales price 198,000 yen Maintained! Comes with wood cabinet! 4th generation model in the P-300 series. The power has also increased by about 20W since the initial model, and the sense of stability has increased even more. On the sound side, the impression is that the thick sound remains the same, and smoothness has been added. The exterior has small scratches and a feeling of use such as dullness. Serial F5X194 (Tomonori Asane)
Maintenance information: 2024.6.24 maintained (output relays, electrolytic capacitors, semi-fixed VR, push switches replaced due to defects and deterioration, ATT disassembly cleaning, solder correction switch knob correction bias and offset check, adjustment, output voice check, interior and exterior cleaning)
Accessories: copy of instruction manual
Main specifications: 170W+170W (8Ω) left and right independent volume level adjustable W445 x H160 x D373 mm 23 kg
This is a brass tweeter stand for the company's T900A, T925A, and T90A. The tweeter can be stably placed on top of the speaker system. The exterior has small scratches, paint bald spots, dullness, etc. (Hiura Katsuji)
Accessories: none
Main specifications: W65 x H20 x D91 mm weight 471 g
216mm pole (19mm diameter) set of 4 silver color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions, line scratches, and paint peeling in places (Murakoshi Yoichi)
Accessories: none
Set of 4 This is a silver pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
*Only 3 are 180mm pole (19mm diameter) quadraspires option, silver poles. If you are looking for additional poles such as Q4 or Q4D, don't miss it. There are small scratches and dullness on the exterior (Tomoho Asaine)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
The price has been reduced! 2024/7/4 sales price 99,800 yen SAE control amplifier. A preamplifier with a built-in microcomputer that drastically shortens the signal path and makes it multifunctional. It has a design and operability that tickles the hearts of enthusiasts, yet it expresses a straight sound in response to input. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.7.2 inspected by a repairer (RCA earth cleaning, other C, R, etc. are currently OK, internal ICs, etc. are not available, so no further support is possible. (Currently, it works OK.)
Accessories: none
Main specifications: PHONO (MM/MC) equipped W483 x H102 x D347 mm weight 6.0 kg
The disposal price has been reduced (member prices are not applicable). 2024/6/28 sales price 498,000 yen Maintenance including pickup replacement has been completed by the manufacturer in 2022! Esoteric heavyweight SACD transport P-03 It is equipped with a VRDS-NEO mechanism for high-end use, and the power supply part and mechanism part have a completely separate structure with a strong chassis. The balance is so good that it surpasses advanced models, and in particular, you can enjoy the low frequency resolution and attack strength at the highest grade. There is a small scratch on the front and dirt on the top plate and remote control (Ryo Mizusaki)
Maintenance information: 2022.1.28 Manufacturer maintained (belt, gear, shutter mechanism gasket, flat cable consumable parts replacement, and pickup replacement was carried out because the RF output level of the pickup was at the lower limit of the specified value. Other mechanical parts were disassembled, inspected, lubricated, and each part was inspected and adjusted.)
Accessories: remote control, copy of instruction manual, power cord
Main specifications: Playable media with DSD conversion function Super Audio CD, CD, CD-R, CD-RW digital output i.LINK x 1/XLR x 2/RCA x 1 word sync input BNC x 1 W445 x H159 x D420 mm 30 kg
The price has been drastically reduced. 2024/5/16 sales price 64,800 yen A woofer unit equipped with an SMC magnetic circuit that achieves significant reduction in distortion by adopting SMC material (soft magnetic compound) for the pole piece part of the magnetic circuit is mounted. You can enjoy the small yet highly textured sound of Dali. There are dull stains on the exterior and edge cone paper, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: saran net
Main specifications: 4Ω 87dB4 59Hz to 27kHz W195xH351xD297mm 7.8 kg
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
The price has been reduced. 2024/5/20 sales price 19,800 yen ※Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
Reasonably priced speaker stand from Hayami Industries. It is designed for installing small speakers. Since it is lightweight, you can easily change the position of the stand, and it is an easy-to-use stand. There is a feeling of use on the exterior, such as dullness or small scratches (Asaine Tomoho)
Accessories: none
Main specifications: bottom plate dimensions W230 x H450 x D295 mm, top plate dimensions W190 x D230 mm, weight 4 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2024/6/19 sales price 24,800 yen. *Currently sold. YAMAHA bookshelf speakers. It is a high-resolution compatible model created by the designer of the “Soavo” series, which was highly acclaimed worldwide, and although it is an entry model, it is designed with particular attention to sound. Of course, the traditional high frequencies of the NS Series are excellent, and the fact that bass reflex dubbing, which is common on bookshelves, is suppressed is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: saran net, original box
Main specifications: 2-way bass reflex type (non-magnetic) playback frequency band 55 Hz to 45 kHz impedance 6 ohms allowable input 40 W maximum input 120 W output sound pressure level 87 dB crossover frequency 2.8 kHz W183 x H320 x D267 mm weight 6.1 kg
The price has been reduced. 2024/6/3 sales price 15,000 yen*The attenuator is cheap and sold as is. This model was measured to improve the quality of the NS-500M. Carbon is used for the woofer. It has a transparent tone typical of Yamaha, has good response, and is made with digital sources in mind. Overall, there is a lot of feeling of use such as small scratches and dullness (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 3-way speaker 40Hz-20000Hz 6Ω 100W W374 x H678 x D324.5mm 23.5 kg
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle