※1 lock screw is tight and does not move, so it is inexpensive. There are no connection issues. Saek's banana plug set of 4 is an authentic model that can increase the connection pressure with the terminal with a screw-type lock mechanism. (FUJISAWA KOSHI)
Accessories: No accessories
Comes with a pedestal. Super tweeter using an aluminum alloy thick cylindrical horn and an ultra-lightweight ring diaphragm. It expands the well-stretched, clean high frequency range. There is an entry in the manual (Tamura Eiji)
Maintenance information: 2024.7.3 oscillator check OK
Accessories: pedestal, instruction manual
Main specifications: Alnico magnet, 8Ω, playback frequency band, 5kHz to 35kHz, output sound pressure level, 106dB, recommended crossover, 7kHz or higher, input 50W, 800g/book
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. Serial 2820-1G2 (Tamura Eiji)
Maintenance information: 2024.7.3 continuity check OK
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
The 1.5m power cable is made of Acrolink's unique ultra-high purity DUCC 7N Cu, and 50 0.37φwires with stress-free processing are twisted to avoid mutual interference and noise. Try it out with a classical symphony. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
Material, set of 4 spikes with unknown details. It is very similar to the J1 Project cone spike and has the same screw diameter. How about amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch 8 mm diameter 40 mm height 26 mm 23.7 g
PSE standard FURUTECH inlet plug is a non-magnetic design using gold-plated copper screws and stainless steel parts that conform to UL standards. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
VCYOYO (Mitsuke Seiki) spacer for SMEs. It is used to match the height when combining GARRARD and SME tonearms. Made of brass with a focus on sound quality. There is a light scratch on the back of the attachment (Murakoshi Yoichi)
Accessories: none
Main specifications: Height approx. 9.5 mm
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
THORENS INSULATOR SET OF 3. It comes with a screw-type height adjustment function, but as expected, it is made in Switzerland, and the accuracy of how the screw rotates is excellent, and correction at extremely subtle pitches is possible. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: diameter 35 mm, height 30 to 35 mm, dead weight 53.1 g (actual measurement)
The 1.0 m pair of conductors in the balance cable consists of 19 7NCU 0.26φstrands (white/right winding/black/left wound). The plug is machined from carbon fabric+aluminum alloy solid wood. The realistic sound output, which is transparent and has no habit, has a sense of reality is attractive. You can see a feeling of use on the exterior, dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: none
A 6.0-meter pair speaker cable was introduced in a large quantity, with 100 strands of 0.26φwire using Acrolink's unique DUCC 7N CU. Try out the results in the symphonic strings section! You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: none
A 6.0-meter pair speaker cable was introduced in a large quantity, with 100 strands of 0.26φwire using Acrolink's unique DUCC 7N CU. Try out the results in the symphonic strings section! You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance Information: 2024.7.1
Accessories: none
1.5m high-purity copper power cable 30th anniversary limited edition model Acrolink's unique DUCC 7NCu conductor is used. The excellent resolution, transparency, and realism in the mid to low range are attractive. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.24 continuity confirmed
Accessories: instruction manual, original box
Maintained! JBL masterpiece 375. It is built into a number of famous machines to create a rich sound. In particular, the sense of energy and density in the middle due to the rolled edge is excellent, and the vocals are sensual. The treble that stretches without impacting your ears is also attractive (Daiki Goto)
Maintenance information: 2024.7.2 maintained (diaphragm disconnection adjustment, pad dampener and mounting screw rust replacement, distribution terminal contact part cleaning, terminal dirt cleaning, insulating bushing replacement, diaphragm stain cleaning DCR (21067/8.3 ohm diaphragm scratch), DCR (24539/8.3 ohm diaphragm scratch not))
Accessories: original box
Main specifications: 2 inch driver frequency band 500 Hz to 10 kHz crossover 500 Hz or higher sound pressure level 108 dB impedance 16 ohms diameter 180 x depth 130 mm weight 11.8 kg/book
An MC boost transformer that uses two transformers taken from the same console (microphone input transformer) in the 1940s. Detailed specs are unknown. The 2 system inputs can be switched with a toggle switch (Daiki Goto)
Maintenance information: 2024.7.2 storefront operation confirmed
Accessories: none
Main specifications: W100×D135×H100mm
The price has been reduced. 2024/7/2 sales price 79,800 yen Maintained in 2023/6! The world's first control amplifier compatible with different vacuum tube replacements. It's a compact size that you can play with. Although it is an optional 5AR4 rectifier tube, the USB module is not implemented. There is a scratch (Daiki Goto)
Maintenance information: 2023.6.21 Maintained (balance volume replacement. Rewiring. Jumper wire solder fix. Rotary switch and shaft guide tack correction. Locking agent application. Vacuum tube pin cleaning. Voice check for each input and output. The USB module is not installed. (ECC83 3)
Accessories: power cable
Main specifications: 4 input systems, 2 output systems ECC83S x 3, SOVTEC 5AR4 x 1 size W250 ✕ H135 ✕ D225 mm weight 3.6 kg
※It is glued to the pedestal. A horn tweeter with an Alnico magnet, horn type, and attractive specs with high efficiency. It is sharp and has excellent penetrating power. There is dullness and small scratches (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: Hard aluminum alloy diaphragm, Alnico magnet, frequency characteristics, 5kHz to 35kHz, impedance 8Ω, output sound pressure level, 106 dB, recommended crossover, 7 kHz, baffle opening dimensions: 61 mm, weight: 720g
The price has been reduced. 2024/7/2 sales price 22,000 yen FOSTEX horn tweeter FT50H. It plays a role in expanding sound and improving the reproducibility of space. There is dullness and seal marks (Daiki Goto)
Maintenance information: 2024.7.2 operation confirmed
Accessories: none
Main specifications: ferrite magnet impedance 8 ohms frequency band 5000 to 35000 Hz maximum input 50 W output sound pressure 102 dB recommended crossover 7 Khz W60 × H70 × D70 mm
This model features an enclosure made of solid mahogany. Luxurious designs with particular attention to materials, such as woofers that use Kurt Müller cones and tweeters that use double feather silk soft domes. It has high musicality and reproduces sound quality that is natural and easy to hear. Externally, there is a scratch on the top plate. Serial 11103379, 06102975 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual, saran net
Main specifications: 2 way, 2 speakers, bass reflex system, bookshelf type, anti-magnetic type, W200 x H343 x D263 mm, weight 8.0 kg/book
The price has been reduced! 2024/7/2 sales price 89,800 yen Popular phono equalizer. The built-in MC boost transformer with gain switching is compatible with a wide range of devices from orthophones to Denon, and in addition, it is equipped with an arcator function that improves sound quality deterioration due to magnetism to maximize the characteristics of the cartridge. On the exterior, there is a small scratch on the back of the top plate. Serial 630800711A (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: RIAA curve deviation ± 5 dB input sensitivity/input impedance mm4 mV/47 kohm · MC (high) 0.4 mV/40 ohm · MC (low) 0.18 mV/2.5 Ω S/N ratio mm85dB · MC (high) 77 dB · MC (low) 76 dB channel separation 75 dB or more W364 x H84 x D257 mm 4.4 kg
Good level! High compliance MC cartridges. It boasts a wide range playback capability of 60 kHz, and its sharp, energetic sound is suitable for jazz rock. The sound quality is bright and crisp with good low frequency resolution. Serial 6423 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: instruction manual, needle cover
Main specifications: solid diamond special elliptical needle playback frequency range 20 Hz to 60 kHz voltage 0.4 mV impedance 33 Ω needle tip 0.07 x 0.14 mm square needle pressure 1.4 g dead weight 6 g
Audio-Technica headshell A lightweight aluminum headshell that is both easy to use and has high sound quality. There is a slight screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: No accessories
Main specifications: aluminum dead weight 10g
High performance CD player compatible with high resolution sound sources. Equipped with an “PCM1795” D/A converter compatible with DSD 5.6 MHz, it supports playback of music files such as DSD (2.8 MHz/5.6 MHz) files recorded on a USB memory and high-resolution sound sources up to 192 kHz/24 bit. The exterior is good with no noticeable scratches. Serial 36161201295 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: remote control, copy of instruction manual, original box
Main specifications: Compatible sampling frequency 32/44.1/48/88.2/96/176.4/192 kHz (WAV) 2.8/5.6 MHz (DSD) W434 × H107 × D275 mm 4.5 kg
The price has been reduced! 2024/7/2 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There are small scratches and threads on the dust cover on the exterior. *The phono cable comes with a non-genuine 1m specification. (FUJISAWA KOSHI)
Maintenance information: 2024.7.2 operation confirmed
Accessories: power cord, phono cable (non-genuine 1m), original box, subway
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been reduced! 2024/7/2 sales price 69,800 yen Maintained! JBL UREI standard channel divider. Recommended for those using JBL4345 or 4355 with 2 way/290 Hz specifications. A must have for multi-channel systems in 70s PA systems. There are small scratches and dullness on the exterior. ※The balance connection is No. 3 HOT. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 8254 (Yonejima Satoshi)
Maintenance information: 2024.7.2 Maintained (The remodeled part has been restored. Replace the electric capacitor on the smooth part of the power supply. Solder correction. ATT cleaning. (Missing screws added)
Accessories: No accessories
Key Specifications: Crossover 290 Hz W483 ✕ H44 ✕ D194 mm Weight 1.8 kg
A model that uses ESS's DAC chip “ES9018-K2M” based on information obtained in the development of the high-end “INVICTA”. It is also small in size, perfect for desktops, etc. Female vocals are recommended because they are inexpensive but have high minute resolution. The exterior is dull and has thin scratches. Serial 66112 (Fujisawa Yukishi)
Maintenance information: 2024.7.2 operation confirmed
Accessories: No accessories
Main specifications: Compatible with 2.8 MHz and 5.6 MHz DSD signal playback W99 ✕ H23 ✕ D101 mm Weight 0.38 kg
Full maintenance from the exterior to the unit network! It is a 2-way specification for LE14A+N1200+175DLH. In particular, the rich mid-high range of the 175DLH is impressive, and it makes me hear the playback of voices, saxophone, etc. with sexy playback sounds (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 Maintained (exterior repair/polishing/oil finish
Front and rear baffle/hakama repair/paint lattice repair/polishing/painting, backing fabric replacement woofer maintenance: cone paper coating/frame polishing driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement
Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement)
Accessories: saran net
Main Specifications: Unit Configuration/175DLH/LE14A/N1200 Allowable Input 40W Impedance 8Ω Size W474 x H754 x D400 mm Weight 32 kg
Maintained! The younger brother of the X5000 is popular for its half-size and fixed pickup mechanism. Slide the acrylic panel, place the CD, and place the stabilizer. A highly tasteful model with the hassle of an analog player that makes you feel like listening to music more deeply. The clear, bouncy sound quality is also attractive. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 maintenance completed (oil application to all parts of the tact switch replacement mechanism, optical system cleaning, confirmation of regeneration RF level 900 mVP-P)
Accessories: stabilizer, remote control, instruction manual
Main specifications: Top loading system, fixed optical mechanism, 1 analog output system, 2 digital output systems (optical/coaxial), W280 x H90 x D400 mm, 6.0 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/7/2 sales price 198,000 yen Edge replacement and other maintenance has been completed! A 2-way system equipped with a large horn and professional driver typical of JBL. You can enjoy the exhilarating feeling unique to JBL with good extrusion in the mid and low frequencies and wide dynamic range of sound reproduction. It is an easy-to-use speaker that has a characteristic that produces sound with good momentum, and does not require an amplifier. It has been repaired, but there is still a slight feeling of use such as stylus repair marks (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 maintenance completed (top plate coating, other overall cleaning/touch repair, saran net replacement, .woofer edge replacement, driver magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement)
Accessories: saran net, jumper
Main specifications: 2 way, 2 speakers, bass reflex system, floor type frequency band 32 to 2 kHz, crossover 950 Hz, sound pressure level 92 dB, 6 ohms, W561 x H985 x D406 mm, 52.3 kg
Full maintenance from the exterior to the unit network! A system equipped with the famous Monitor GOLD machine in an original sealed enclosure. The good sound of acoustic instruments and small-group classics is still attractive enough. The beauty of the sound, which can be said to be the origin of European beautiful tone speakers, is exceptional (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 maintained (exterior repair/polishing/clear finish
Rear baffle repair/painting, saran net cleaning/repasting, fraying repair, magnetic circuit gap cleaning/center adjustment for both unit low and high frequencies, network frequency characteristic check, ATT cleaning, deteriorated electrolytic capacitor replacement, 4-pin terminal cleaning, terminal replacement)
Accessories: none
Main specifications: Coaxial 2-way sealed speaker system unit 10 inch MONITOR GOLD coaxial 2-way playback frequency band 25 Hz to 20 kHz maximum input 15 W input impedance 8 Ω crossover frequency 1 kHz dimensions W380 x H583 x D 240 mm weight 13 kg
Full maintenance from the exterior to the unit network! A popular model with an eye-catching bright blue baffle. A titanium dome is used for the tweeter, and the sharpness in the high range is excellent. The sounds of rock, jazz, etc. are pleasant, and the sound is sharp while the bass comes out well (Kobayashi Hitoshi)
Maintenance information: 2024.7.2 maintenance completed (exterior polishing, oil wax coating, baffle paint, saran net repair/frame repair, woofer cone paper coating, tweeter magnetic circuit rust removal/gap cleaning/center adjustment, center cap/grill dent repair, rubber ring replacement, network frequency characteristic check, ATT cleaning)
Accessories: saran net
Main specifications: 3 way 3 speakers bass reflex system frequency characteristics 45 Hz to 22 kHz crossover 2 kHz/5 kHz sound pressure level 93 dB impedance 6 ohms dimensions W362 x H597 x D299 mm weight 20 kg
The outer insulation for the 1.5m RCA terminal of the digital cable is flexible PVC. It's an orthodox cable with no quirks. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.7.2 continuity confirmed
Accessories: none
Maintained, new dust cover created, SHURE M44G included, S-shaped arm. An auto lift-up player with an automatic lift-up function when playback is over. The cabinet has a sense of luxury, and the sound quality is authentic, with a thickness unique to that time. The exterior has dullness, small scratches, etc., and a feeling of use can be seen. Serial 1512931 (Tomonori Asaine)
Maintenance information: 2024.7.2 maintained (PU code, 2 CDS for auto lift replaced. Arm disassembly cleaning, sound test. (Create a new dust cover)
Accessories: shell MG-10, cartridge SHURE M44G, copy of instruction manual
Main specifications: tone arm with static balance type electronic damping mechanism inner rotor type high torque AC servo motor needle pressure variable range 0 to 3 g W490 x H219 x 410 mm 15 kg
Reasonably priced speaker stand from Hayami Industries. It is designed for installing small speakers. Since it is lightweight, you can easily change the position of the stand, and it is an easy-to-use stand. There is a feeling of use on the exterior, such as dullness or small scratches (Asaine Tomoho)
Accessories: none
Main specifications: bottom plate dimensions W230 x H450 x D295 mm, top plate dimensions W190 x D230 mm, weight 4 kg/book
Bookshelf speaker with built-in power amplifier A bi-amp system is used in which the high and low frequencies are driven by separate power amplifiers. You can enjoy powerful, high-quality sound by connecting to a smartphone or flat screen TV. Since it is cheap, it will be sold as is. There is a line scratch on the cone paper on one side. (ASAINE Tomonori)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: none
Main specifications: built-in power amplifier output 18W x 2 aperture 100mm woofer with 19mm soft dome tweeter playback frequency 60 Hz to 30000 Hz crossover 1500 Hz W144 x H220 x D 180 mm weight 3.5 kg
※There is no problem with operation, but it is currently sold because it is cheap. A thin, all-in-one media player. Sound files can be played regardless of media, such as CDs, Bluetooth, SD cards, USB memory, and USB hard disks. There is a feeling of use on the exterior such as small scratches (Tamai Jun)
Maintenance Information: 24.6.30
Accessories: remote control instruction manual
Main specifications: W483 x H44 x D347 mm 3.6 kg
Luxman's blockbuster MM/MC phono equalizer amplifier is still highly popular. Clean sound with a good S/N ratio with a 3-circuit all-discrete configuration of MC head amplifiers, RIAA amplifiers, and output buffer amplifiers. The sound with excellent gain and a sense of relaxation is attractive. The exterior condition is damaged and dull over time. Serial W71151321 (Yamato Yuki)
Maintenance information: 2024.7.1 operation confirmed
Accessories: instruction manual
Main specifications: mm/MC independent NF type equalizer gain mm36dB MC62dB input sensitivity mm4mV/MC0.2mV compatible impedance mm10kohm or less/MC40Ω or less input impedance mm50kΩ/mc200Ω w126 × H183 × D421 mm 6.8 kg
It is a power amplifier with extremely high cost performance. It has good loss in the mid to high range, and is crisp. It seems to go well with vocals and acoustic songs. The smart front design, including the meter panel, is also one of the attractions. The exterior has small scratches, dullness, and a feeling of use. Serial 0E9EB02383 (Tomoho Asaine)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: none
Main specifications: 70W+70W (8Ω) MOS-Class AA circuit power consumption 210W input level adjustable (with direct input) W430 x H136 x D344 mm 9.8 kg
By placing it between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Tamai Jun)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
J1-Project high polymer primary rack. High-tech materials with excellent characteristics such as noise reduction, resilience, and impact resistance are used for the shelves. We are thoroughly particular about every part of the primary rack we have adopted, and it is a true sound quality priority design without compromise that takes thorough vibration countermeasures into account. There is a feeling of use on the exterior such as scratches and dullness (Tamai Jun)
Accessories: none
Main specifications: size W670 x H210 x D540 mm
Maintained! Popular crossover 500 Hz. Please use it with the JBL2440/2441 driver. There is a sense of extrusion and granularity, and the connection to high frequencies is also natural. You can enjoy stretchy low frequencies and tense high frequencies. It is essential for constructing large systems centered around 38cm units. The exterior has small scratches, threads, dirt, etc. (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, terminal damage replacement. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: crossover 500 Hz network impedance 12 to 16 ohms high frequency level control 6/8/10 dB W121 x H153 x D130 mm 1.9 kg
A standard model of domestic mono cartridges. A popular model that condenses the appeal of a mono needle, which has a thick overall sound and is also powerful. It is also attractive that the output is high and can be used without a step-up transformer (Ryo Mizusaki)
Maintenance information: 2024.7.1 sound output confirmed
Accessories: needle cover
Main specifications: output voltage 3 mV playback frequency 50 Hz to 10 kHz impedance 240 ohms compatible load 1 kΩ or more needle tip 17 microns diamond round needle needle pressure 3G
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? There is a feeling of use on the exterior, such as dullness and small scratches (Mizusaki Ryo)
Maintenance information: 2024.7.1 Maintained (terminal terminal mounting screws rust and insulation bushing deterioration replacement. Terminal cleaning, transformer adhesion repair. (Attenuator SW contact cleaning, crossover check OK)
Accessories: none
Main specifications: loss over frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
The price has been drastically reduced. 2024/7/1 sales price 558,000 yen Mark Levinson's 5ch power amplifier. From input to output, it is a power amplifier with a simple and reasonable internal configuration that combines a fully balanced mono power amplifier circuit composed of the shortest condensed signal path and a powerful power supply circuit. There are some scratches on the front panel top plate surface and the heat dissipation fins on the top plate side, and there are some cracks in the speaker terminal cover (Kojima Yosuke)
Maintenance information: 2024.7.1 operation confirmed
Accessories: instruction manual, power cable
Main specifications: output 200W (8Ω) x 5 input terminals RCA-XLR x 5 (input changeover switch type for each channel) W451 x H194 x D504 mm 40.8 kg
The price has been drastically reduced. 2024/7/1 sales price 248,000 yen beautiful item! DENON's current SACD player. A state of the art machine compatible with DSD 11.2 MHz high resolution sound source with USB input. A sense of speed and characteristics typical of a modern aircraft with good resolution have been added to the conventional loose, thick sound quality. Due to the balanced output switching function, there is no problem connecting to overseas amplifiers. There is a feeling of use on the exterior, such as slight dullness and small scratches. There is a small scratch on the back of the remote control. Serial AGU15170400698 (Fujisawa Yukishi)
Maintenance information: 2024.7.1 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: DSD11.2 MHz/PCM384 kHz 32 bit compatible, digital input terminal USB-A x 1, USB-B x 1, coaxial digital input x 1, optical digital input x 1, W434 x H137 x D404 mm 21.4 kg
The price has been drastically reduced. 2024/7/1 sales price 248,000 yen Maintained! This is Macintosh's first transistor control amplifier. It has a crisp and comfortable sound, and it makes me hear a unique McKinn sound reminiscent of a vacuum tube. Scratches and line marks can be seen on the exterior. Serial 33D80 (Fujisawa Yukishi)
Maintenance Information: 2024.7.1 Maintained (Coupling Capacitor Replaced. Selector switch contact cleaning. Mode switch disassembly contact polishing contact grease application. Volume contact cleaning. Rubber foot attachment (Check the operation of each input/output)
Accessories: No accessories
Main specifications: PHONO2 system equalizer curve switching (LP, RIAA) W407 x H135 x D275 mm 7.7 kg
The 0.7 m SUPRA USB 2.0 USB cable is ideal for PC audio, which has become commonplace due to the spread of USB-DACs, etc. 0.8 micron gold plating is applied to the terminals to improve conductivity, and impedance consistency is enhanced at all frequencies with a unique twisted-pair structure (Katsuji Hiura)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: original box
Modern design open rack. This is a high class AV rack with black aluminum frame legs. The exterior has small scratches and a feeling of use (Hiura Katsuji)
Accessories: none
Main specifications: W1150 × H475 × D450 mm 41 kg
Tawk's thin audio board. Sandwich structure with high density wood board, surface material, and back surface material centered around a honeycomb core containing cast iron powder. It is a heavy board that combines high rigidity, high specific gravity, and high vibration damping properties, and suppresses floor softness. “W” type with warm, soft sound quality. The exterior has scratches, dents, cracks, etc. (Mizusaki Ryo)
Accessories: none
Main specifications: W495 x H26 x D445 mm 6 kg