The price has been reduced! 2024/6/18 sales price 5,000 yen*Currently sold. BOSE center speaker Since it is thin, the area around the AV device is not complicated. It is designed to place emphasis on human voice, and is designed to position dialogue in the center even when in a position away from the front. There are stains and scratches on the exterior. Serial 019158963190961AC (Tomoho Asaine)
Maintenance information: 2024.6.18 sweep test good
Accessories: No accessories
Main specifications: 2-way, 4 speakers, bass reflex system, center type, anti-magnetic design unit, low range 5.7 cm cone type x 2/full band 5.7 cm cone
A micro record cleaner with a pair cleaner system that removes dirt with a clear brush and wipes clean with a disc cleaner. It is an unusually good product with a rare original box (Murakoshi Yoichi)
Accessories: original box, spare disc cleaner (2 pieces), instruction manual, brush
Main specifications: pipe arm total length 215 mm center shaft adjustment range 36 to 70 mm
Micro stroboscope It comes with an overhang gauge, so it's convenient to have one. There are small scratches and dents on the exterior (Yonejima Satoshi)
Accessories: No accessories
Comes with original box! DP-1300M heavy headshell counterweights, set of 2 large and small A must-have item for those using heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. It is recommended for those who use a variety of cartridges. There are some scratches on the exterior (Fujisawa Yukishi)
Accessories: original box
Main specifications: Compatible cartridge weight/for 20 to 28 g (small) /26 to 37 g (large)
Pair tube made in the USA side getter measurement value 62/58 (critical value 30) with JAN original box ※ The pair is determined based on GM value measured by the tester TV-7 (Yosuke Kojima)
Accessories: original box
A full-range unit from Stereo magazine's 2016/8 appendix. Uses Fostex's first aluminum cone diaphragm and center cap. It is characterized by the sound's ability to stand up and sharpness (Murakoshi Yoichi)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: original box, mounting screws, gasket
Main specifications: 8cm full range unit impedance 8 ohms minimum resonance frequency 105 Hz sound pressure level 82.5 dB
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
*Only 3 are 180mm pole (19mm diameter) quadraspires option, silver poles. If you are looking for additional poles such as Q4 or Q4D, don't miss it. There are small scratches and dullness on the exterior (Tomoho Asaine)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
Reasonably priced speaker stand from Hayami Industries. It is designed for installing small speakers. Since it is lightweight, you can easily change the position of the stand, and it is an easy-to-use stand. There is a feeling of use on the exterior, such as dullness or small scratches (Asaine Tomoho)
Accessories: none
Main specifications: bottom plate dimensions W230 x H450 x D295 mm, top plate dimensions W190 x D230 mm, weight 4 kg/book
The 0.7 m SUPRA USB 2.0 USB cable is ideal for PC audio, which has become commonplace due to the spread of USB-DACs, etc. 0.8 micron gold plating is applied to the terminals to improve conductivity, and impedance consistency is enhanced at all frequencies with a unique twisted-pair structure (Katsuji Hiura)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: original box
The price has been reduced. 2023/6/15 sales price 5,000 yen Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be freely placed, and has a gentle impression. The sound quality is soft and the sound is relaxing. You can see a feeling of use on the exterior, body cracks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.6.5 operation confirmed
Accessories: none
Main specifications: full range compact speaker, 8 ohms, maximum input, 40 W, W230 x H150 x D163 mm, 1.6 kg
It is an aluminum press shell that uses Audiocraft's Perfect Lock pin. The exterior has a feeling of use such as dullness (Daiki Goto)
Maintenance information: 2024.7.7 continuity confirmed
Accessories: none
Main specifications: dead weight 12g
※1 piece only. Compatible with SX series, FM series, TX series, and ELIMINATOR, in addition to SX300 diaphragms. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.20 Continuity confirmed
Accessories: instruction manual (English), original box
Main specifications: body width 75mm diameter 52mm screw pitch 35mm
Cartridge stand with acrylic cover made by N2 Factory. It is similar to the company's N2-S1, but it can hold 4 pieces. There are small scratches on the exterior (Hiura Katsuji)
Accessories: original box
Main specifications: W162 x H100 x D78 weight 500 g
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
This is an acrylic RECORD STABILIZER with a retro design. It also creates a glamorous appearance (Murakoshi Yoichi)
Accessories: none
Main specifications: height 50 mm diameter 70 mm weight 229 g (actual measurement)
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
※Since it is cheap, it will be handed over as is. Denon center speaker A woofer with a fiberglass diaphragm is used. You can enjoy it casually with a bright and intense tone. There are small scratches and threads on the exterior. Serial 3124607706 (Tomoho Asaine)
Maintenance information: 2024.7.6 sound output confirmed
Accessories: 2 feet
Main specifications: 6Ω 86dB W500×H100×D199 mm 4.1 kg
* I checked the sound, but since it is cheap, it will be passed on as it is. 3-way speaker The saran net on both sides does not open, the screws on the back plate are rusted, and the contents are unidentified because they cannot be removed. There are scratches, dirt, and dullness on the exterior (Katsuji Hiura)
Maintenance information: 2022.1.27 sound output check OK
Accessories: Saran net
Main specifications: 8Ω 60W playback frequency band 35-20,000 Hz W360xH790×D290mm 13.25kg
THORENS INSULATOR SET OF 3. It comes with a screw-type height adjustment function, but as expected, it is made in Switzerland, and the accuracy of how the screw rotates is excellent, and correction at extremely subtle pitches is possible. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: diameter 35 mm, height 30 to 35 mm, dead weight 53.1 g (actual measurement)
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The price has been reduced. 2024/2/24 sales price 6,000 yen ※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep test good
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
Speaker cable A high quality speaker cable using a 4.0 m pair crimped with a metal tube on one side and an untreated PC Triple C conductor on one side. There is dullness and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.7.1 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro)
Maintenance information: 2023.5.5 operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
An improved model of the ES-10. 2-lock pin construction. It is a casually elegant shell with a silver body and champagne gold fingers. There is a feeling of use on the exterior due to scratches, dullness, dirt, etc. (Jun Tamai)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: none
Main specifications: dead weight 12g
The price has been reduced. 2024/2/25 sales price 8,000 yen ※Since it is cheap, it will be handed over as is. Marantz 10cm full range speaker There is no habit, and it sounds in a well-balanced manner from high to low frequencies. It doesn't take up much space, so you can set it up anywhere. The exterior has scratches, stains, scuffs, etc. Also, there are color peeling and partial deformation on the net. Serial MZ01748010115 (Fujisawa Yukishi)
Maintenance information: 2024.2.25 Operation confirmed
Accessories: saran net
Main specifications: 1 way, 1 speaker, bass reflex system, setting free type, rated input 35W, impedance 6Ω, playback frequency 50 Hz to 20 kHz, W230 x H150 x D150 mm
This is a woofer mount adapter that is thought to be used to convert a 38cm unit hole to a 30cm unit. The previous owner attached it to the JBL C38 BARON. The exterior and bolt mounting part of the individual on one side are damaged, and there is a feeling of use due to dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: mounting screw pitch: outer circumference: 370 mm, inner circumference: 293 mm; caliber: 270 mm; external dimensions: W356 x H365 x D10 mm; approx. 0.4 kg
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 9,800 yen. ※1 bottle only. A coaxial 2-way speaker with unknown details, very similar to Pioneer's PAX series. I was able to check the sound output, but I couldn't open the box. It seems that it can also be used as a center speaker, etc. There are many cracks, creases, and scratches (Murakoshi Yoichi)
Maintenance information: 2023.11.17 sound output confirmed
Accessories: none
Main specifications: W385 x H575 x D365 mm 16.2 kg (actual measurement)
※ One lock screw is missing, so it's cheap (there are no problems with use) Gun-type banana plugs, set of 4, rhodium-plated, and a safety cover is hung on the main part, and the terminal connection part is structured to tighten the conductor with 2 M2 size hex screws (Tamura Eiji)
Accessories: case
Bookshelf speaker with built-in power amplifier A bi-amp system is used in which the high and low frequencies are driven by separate power amplifiers. You can enjoy powerful, high-quality sound by connecting to a smartphone or flat screen TV. Since it is cheap, it will be sold as is. There is a line scratch on the cone paper on one side. (ASAINE Tomonori)
Maintenance information: 2024.7.2 sound output confirmed
Accessories: none
Main specifications: built-in power amplifier output 18W x 2 aperture 100mm woofer with 19mm soft dome tweeter playback frequency 60 Hz to 30000 Hz crossover 1500 Hz W144 x H220 x D 180 mm weight 3.5 kg
The price has been drastically reduced. 2024/5/22 sales price 8,000 yen. *Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
The price has been drastically reduced. 2024/5/26 sales price 8,000 yen. *Part of the SP terminal plate and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Sunshine's damping sheet with virtual earth is the latest model of an ultra-thin audio damping sheet. 3-layer structure made of iron and resin-based materials/Earth wire uses special copper wire treated with Tigron's H.S.E. The exterior has dullness, small scratches, and some bends (Tomoho Asaine)
Accessories: Earth terminal*alligator clip specification
Main specifications: size W440mm×H1.2mm×D350mm
Improved model, successor to the 1.8m JPA-10000 power cable. The sheath is significantly thinner than the predecessor, improving maneuverability. In addition to the individuality of the sound of the predecessor, I have the impression that the strength of the low frequencies has increased (Hiroki Aso)
Maintenance information: 2024.6.30 continuity confirmed
Accessories: none
By placing it between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Tamai Jun)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
The price has been drastically reduced. 2024/6/28 sales price 8,800 yen DENON small bookshelf speaker. Compact, orthodox, and calm design reproduces mild, highly textured sound quality with European tones in mind. The exterior has a feeling of use such as dullness. Serial 9064601786 9064601786 (Asaine Tomoho)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: saran net
Main specifications: 2-way, 2-speaker bass reflex type, anti-magnetic design, 6 ohms, frequency characteristics, 40 Hz to 40 kHz, crossover frequency, 3 kHz, efficiency: 86 dB/w/m, W182 x H296 x D237 mm, 5.2 kg
This is an orthophone wall socket and baseboard plate set. A highly textured product made of natural oak wood. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original box 60mm long screws x 2
Main specifications: natural wood, oak wood, thickness 20 mm, size 150 x 98 mm, weight 170 g
RCA cable 1.0m pair oxygen-free copper OFC Ritz wire 2-core shield plug, standard AccuPhase line cable with gold plating. The sound is more gorgeous than the L-10. There are dullness and scratches around the plug, and abrasions on the sheath (Kojima Yosuke)
Accessories: none
Set of 4 Solderless, brass+rhodium plated premium banana plug A double screw system is used to securely lock the cable. *A wrench is required to fix the cable. There is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible with cable diameters of 1.5 to 4.0 mm
Set of 4 Solderless, brass+rhodium plated premium banana plug A double screw system is used to securely lock the cable. *A wrench is required to fix the cable. There is a light bend at the tip of one (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible with cable diameters of 1.5 to 4.0 mm
Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
※Since it is inexpensive, it will be handed over as is. Tamban 10cm full range unit. An ultra-thin PP diaphragm with reinforced ribs is used. The sound is clear and crisp. A 6-8 liter bass reflex box is recommended (Tamura Eiji)
Maintenance information: 2023.10.1 sweep check OK
Accessories: none
Main Specifications: Rubber Edge Impedance 4 Ohms Sound Pressure Level 87 dB Frequency Band 63 to 17,000 Hz Maximum Input 40 W Baffle Aperture Diameter 94 mm Weight 380 g