Maintained. The Lux tubular premium FM/AM tuner WZ-30 was developed with the aim of being the ultimate FM stereo tuner. With the warm and thick sound quality typical of a tube ball, you can enjoy broadcasting in a relaxed atmosphere. There are small scratches and dullness appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.6.22 maintained (relay unstable exchange, 100 μF x 2 defective replacement, electrolytic capacitor 100 μF, etc., 6 defective replacement, trimmer capacitor defective exchange, 2 germanium diode defects and deterioration exchanges, 5 W resistor replacement, vacuum tube 6U8 deterioration replacement, IF/RF/MPX readjustment* operation checked with other AC100V)
Main specifications: tubular FM/AM tuner W470 x H175 x D275 mm 10 kg
The price has been reduced! 2024/6/23 sales price 25,000 yen Popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. The exterior has a feeling of use such as dullness and small scratches. Serial 11040004 (Tomoho Asaine)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box instruction manual power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
Oyaide's multiple record stabilizer. Carbon FRP was used for the top and bottom disc tops in place of the previous model Texalum. Sound quality is further improved by the superior vibration treatment of carbon FRP. Weights can also be replaced (Mizushima Itsuro)
Accessories: instruction manual, original box
Main specifications: 1 top and bottom disc each (A5052 aluminum alloy cutting+carbon FRP) weight x 6, connecting shaft x 1 (brass chrome plated), weight spacer x 1 (EPDM rubber), 200g (no weight) to 440g (full weight attached) *Weight can be changed in 40g increments H35mm
The price has been drastically reduced. 2024/6/23 sales price 448,000 yen ※There is slight unevenness in the display, so it's cheap. AKURATE DS/K2 (AKURATE DS/K model change) adopted a new clock architecture. Equipped with a digital output terminal (~192 kHz), DAC by examining the circuit layout, and improvements in power supply to the processor section, etc., it is a degree of perfection that is close to the height of the KLIMAX DS. There are scuffs and dirt marks on the exterior. Genuine Rin Japan Serial 1389612 (Tamura Eiji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: remote control, power cable
Main specifications: support file/FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS compatible resolution/7.35-192kHz, 16-24bit Ethernet interface/100BASE-T RJ45, UPnP analog audio output XLR balance, RCA unbalance (fixed/variable output) digital audio output/75Ω BNC 1 system EXAKT LINK/2 system W380×D380×H91 mm 5.6 kg
MODEL501 minor change model. It is a model in which the output was raised to 0.4 mv, and the length of the cantilever was slightly shortened to improve trace capability. Excellent sharpness and straight bandwidth balance (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: needle cover
Main specifications: MC type oval solid diamond output voltage 0.4 mV dead weight approx. 8 g needle pressure range 1.4-1.8 g dead weight 8 g
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S is on the front part, the volume has been increased in size from the previous model, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W192 × H107 × D98 mm 1.0 kg (actual measurement)
Maintained. The highest stereo power amplifier in the company's X series. It is an American sound from the good old days, and it drives the speaker briskly and powerfully. The dry, straight sound is a gem that is still highly popular with enthusiasts. The power gauge design is also impressive. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance Information: 2019.4.7 Maintained (transistor, power transistor, fuse replacement. Exchange OP AMP and coupling C in the display circuit. Replace coupling C, bypass C, etc. in both channel driver boards. Output mute relay contact polishing. Operation check)
Accessories: none
Main specifications: 250W+250W (8Ω) hypertonic A class amplifier W485 × H185 × D390 mm 24 kg
3rd generation voicing equalizer. Sound field correction/sound field creation is possible freely in the listening room by simply operating the touch panel screen with a single pen. How about a companion to your pursuit of a music space of your choice? The microphone holder has been changed to an Audio-Technica AT8407 (Shota Sasaki)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control, manual, power cable, original box, connection cable, microphone, stylus, microphone holder (AT8407)
Main specifications: 35 band real-time playback frequency characteristics 0.5 to 50,000 Hz (sampling frequency 2.8224 MHz or 192 kHz) 4.0 to 20,000 Hz digital input/output: HS-Link, coaxial digital, 1 optical digital system each dimensions W465 x H151 x D396 mm weight 13.8 kg
Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of a wide range of ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Fujisawa Yukishi)
Maintenance information: 2024.6.5 maintenance (TR in EX Pander board, Tr replacement in headphone board, operation check, connector caulking cleaning, solder processing) 2022.9.29 maintained (contacts cleaned due to poor switch and volume contact. The flat cable was replaced due to poor deterioration. The electrolytic capacitor has been replaced. The panel lamp has been replaced. (The power supply circuit tap has been changed to 100V specification.)
Accessories: copy of instruction manual
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
This is a prototype that changed the WX-1S, which usually has 3 housings, to 2 woofers. The amplifier section is separate, and it has a simple specification that is simply placed in a plastic case. Sound Art's long-selling 3D speaker system. Once the setting is decided, it is a sense of scale and realism that greatly exceeds the size. * There is no problem with operation, but since the veneer has peeled off, cracks, etc., it is currently sold. (Oikawa Tetsuji)
Maintenance information: 2024.6.26 storefront operation confirmed
Accessories: 2 power amplifiers for woofers, 2 power cables
Main specifications: 2 way 2 speakers+woofer 100W 3D speaker system with built-in power amplifier satellite part W200 x H920 x D180 mm 9.5 kg, woofer part W430 x H300 x D580 mm 15 kg