Both inside and outside have been maintained! A floor-type speaker with a round baffle and vertical twin, and thorough attention to materials. The sense of density and high response sound that firmly inherits the TAD philosophy is attractive. The dynamic and speedy high range with the TD2001 driver and horn using Japanese maple wood is attractive. The exterior has bumps and small scratches on the sides. Serial 00206 00210 (Yonejima Satoshi)
Maintenance information: 2024.6.20 Maintained (exterior cleaning/touch repair, woofer maintenance: correction of resonance locations such as 2 floating edges, unit detachment)
Accessories: saran net
Main specifications: 2 way 3 speaker bass reflex floor type woofer 25 cm cone type x 2 horn type tweeter x 1 (beryllium diaphragm used) Alnico crossover frequency 1.2 kHz impedance 6 Ω maximum input 300 W 93 db W370 x H1 210 x D586 mm 85.0 kg
Maintained! The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. *Remote control and transport lock screws are missing. The exterior has scratches, dirt, and bumps. Serial MZ019415100166 (Fujisawa Yukishi)
Maintenance information: 2024.6.21 Maintained (replacement of each drive belt due to deterioration of the tray and clamp drive system belts. Disassemble the mechanical part and clean it. Grease application. Optical system cleaning)
Accessories: No accessories
Main specifications: analog output RCA1 system, digital output 2 coaxial systems W458 x H110 x D369 mm 11 kg
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
The price has been drastically reduced! 2024/5/25 sales price 69,800 yen ※The exterior is in poor condition, so it's cheap. An upgraded model of PMC's small monitor DB1. It has excellent characteristics as a near-field monitor, and is characterized by good phase characteristics and rich spatial expression. It is a high-quality model that can be further upgraded by adding an amplifier. There are line scratches and bumps on the exterior. Also, there are cracks or tears in the urethane on the back. Serial 012503/012504 (Yonejima Satoshi)
Maintenance information: 2024.5.25 sweep test good
Accessories: saran net
Main specifications: 2 way 2 speakers, frequency characteristics, 50 Hz to 25 kHz, output sound pressure level, 87 dB, impedance, 8 ohms, dimensions: H290 x W155 x D240 mm (including grille), mass: 4.5 kg
The disposal price has been reduced! (Member price not applicable) 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
※The manufacturer logo on the front is missing, so it's cheap. Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. There are scratches, bumps, dirt marks, etc. on the exterior. Serial 613082601 (Tamura Eiji)
Maintenance information: 2024.6.13 maintained (input selector, etc., switch dismantling and polishing grease application (power amplifier direct, source direct, tape, tone, loudness, muting, processor), output relay replacement, protector part capacitor replacement, power amplifier part resistor replacement, interior and exterior inspection and cleaning, operation confirmation)
Accessories: No accessories
Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
This is a 4-tier rack with GS-601 attached to Hayami's popular rack GS-611. You can remove the GS-601 and use it as a 3-tier according to your preferences. Since it has a sturdy construction, it is an ideal car for heavyweight amplifiers, etc. There are bumps and small scratches. One cap to hide the screw hole on the top is missing (Sasaki Shota)
Accessories: none
Main specifications: GS-611: W627 x H523 x D584 mm weight 38.05 kg load capacity: top plate 150 kg shelf board 50 kg bottom plate 150 kg GS-601: W625 x H270 x D570 mm weight 12.1 kg
The price has been reduced. 2024/6/27 sales price 26,800 yen ※ It is cheap because it is in poor condition such as blows and dents. Speaker DEBUT line by Andrew Jones, an engineer who has worked on TAD and KEF speaker development. It is a clear, cohesive speaker with excellent phase characteristics. The exterior has conspicuous bumps, scratches, and creases on one side. There are holes in some sarangs. Serial 31921E001063 31921E001064 (Tomoho Asaine)
Maintenance information: 2024.6.27 sweep test good
Accessories: saran net
Main specifications: 44 to 20,000 Hz 6 ohms 87 dB W216 x H356 x D254 mm 6.5 kg
Comes with a special bracket. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has bumps, scratches, and dullness. Serial 9020409, 9020410 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: special bracket, saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none