Full maintenance was carried out to replace all deteriorated parts such as capacitors and vacuum tubes! 38 FD, the most popular of the 38 series, is now in stock! The warm tone has plenty of warmth in the bass and mids, and you can enjoy the true essence of lackstone, where you can enjoy the afterglow of the tone. The exterior has a beautiful finish due to exterior maintenance, but rust etc. on the back remain. Serial 101 20007 (Tomoho Asaine)
Maintenance information: 2024.6.6 maintained (parts replacement, input/output waveform check, load test (1kHz sine wave, 8Ω load: 30W+30W, OK), sound output test) 2020.4.2 maintained (vacuum tube (50CA10), electrolytic capacitor, block electrolytic capacitor, coupling capacitor, vacuum tube socket, headphone jack, micro switch, rectifier diode, semi-fixed resistor, fuse replacement. Complete disassembly of SW/VOL contacts, polish, and apply grease to prevent oxidation and sulfidation. Circuit readjustment, input/output waveform confirmation, load test (1kHz sine wave, 8Ω load: 30W+30W), distortion adjustment (maximum output: 0.2%), sound output test)
Accessories: manual copy power cord
Main specifications: 30W+30W (4, 8, 16 ohms) line input 4 systems phono 2 systems (mm) W476 x H190 x D335 mm 18 kg
The price has been drastically reduced. 2024/1/13 sale price 99,800 yen rare Gauss 46cm woofer! This is the first model to arrive at Hi-Fi. Unlike JBL woofers, it is characterized by sound tightness and strength of extrusion. It also seems interesting to use it as a 4345 woofer (Sasaki Shota)
Main specifications: Ferrite magnet 46cm woofer impedance 8Ω (measured DC resistance value 6.3Ω, 6.0Ω) 8.7kg (actual measurement)
※Since it is cheap, it will be handed over as is. Comes with a remote control. AM/FM stereo tuner with dual-gate MOS FET on the front end. The tone is bright and natural. There are dirt scratches and threads on the exterior. Serial MZ009520050055 (Tamura Eiji)
Maintenance information: 2024.6.5 operation confirmed
Accessories: remote control, instruction manual, AM antenna
Main specifications: AM/FM stereo synthesizer tuner dimensions W428 x H86 x D295 mm weight 3.2 kg
Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: saran net, instruction manual
Main specifications: 1 way 1 speaker impedance 6Ω maximum input 150W output sound pressure level 86db W232 × H154 × D172 mm 2 kg
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Currently sold. An affordable theater speaker with a round finish. A tall boy with 4 ways that are more luxurious than the price. It is a cost-effective speaker that can be easily used for TVs and subs. In addition to the exterior and damage to the dowels on the saran net, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net, instruction manual
Main specifications: 3-way 4-speaker bass reflex type maximum input 120W rated input 60W playback frequency band 36Hz to 25kHz 8Ω output sound pressure level 85dB W225 x H900 x D313 mm 15.6 kg
Denon speaker stand The height can be changed, so it's convenient. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W355 x H535 to 950 (adjustable height) x D309 mm 3.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
Although the details of the stand are unknown, it is well-made, and it is a silver iron stand.
It has a simple appearance, so it can be used for a variety of purposes. The exterior has noticeable dirt on the bottom plate and support (Mizusaki Ryo)
Accessories: none
Main specifications: height: 625 mm top plate size W145 x D180 mm bottom plate size W250 x D310 mm weight 5 kg/1 bottle
Trio 2-way speakers. A sectional horn is used for the high range, and a free edge is used for the low range woofer. It's an inexpensive yet tasteful sound. The particle board of the hakama deteriorates and falls apart in tatters (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 2 way 93dB W392 x H753 x D395 mm 20kg
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? On the exterior, there is rust on the metal part of the magnet (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
The price has been reduced! 2024/6/1 sales price 89,800 yen Maintained! A player equipped with the Wolfoson WM8740 DAC chip with 192 kHz/24 bit resolution, and has strong expressive power and tends to sound straight. The exterior has a feeling of use such as dullness. Serial 704-3341068 (Tomonori Asaine)
Maintenance information: 2024.6.1 maintained (loader mechanism Assy replacement implemented EJECT key contact replacement foot rubber repair main software update (V104->V111), etc. confirmed)
Accessories: remote control power cord
Main specifications: W431 x H104 x D320 mm 7.4 kg
The price has been reduced. 2024/5/23 sales price 79,800 yen Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. There are threads and small scratches (Daiki Goto)
Maintenance information: 2024.6.2 maintained (maintenance contents/TONE and other subsonic, loudness, processor, muting, source direct, power amplifier direct, input selector, tape switch disassembly, polishing grease application, output relay replacement, protector capacitor replacement, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, running test.)
Accessories: copy of the manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A small 2-way speaker with excellent sense of localization and transparency. The high frequency that extends smoothly is easy on the ears, and although it is a basic model, it has a solid musical sound, which is attractive. There is a stain on the saran net on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: 2 way 2 speakers rear bass reflex frequency band 53 Hz to 26.5 kHz crossover 2.9 kHz 6 Ω 86.5 dB W162 x H274 x D228 mm 4.2 kg
Pair tube, 5 pole tube, smoke mesh plate, made in England, measured value 34/34 (rejected value 25) with white box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube, 5 pole tube, smoke mesh plate, made in England, measured value 36/36 (rejected value 25) with white box, so it's inexpensive because it makes a rattling noise in 1 tube ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
The price has been reduced! 2024/4/21 sales price 4,500 yen This is a genuine wood wax for TANNOY speakers. Approximately 10% have been used. Since fixation due to aging can be seen, quality cannot be guaranteed (Hiroki Aso)
Accessories: original box
The price has been reduced. 2024/5/17 sales price 45,000 yen There is a slight gap in the volume, and it will be sold as is. The mid-range is thick and powerful, and it is characterized by analog-like sound quality with a moderate sense of range. It effectively gently relaxes hard sound CD players. The characters on the panel display are slightly off, and the 48khz lamp is misaligned in the back (Takasaki Atsushi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: copy of the manual
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
The price has been reduced. 2024/5/25 sales price 99,800 yen with 2447 exclusive horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
DENON analog player. It is a model that is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. This model is also suitable for introductory use. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Asaine Tomoho)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual cartridge, EP adapter, subweight
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
Maintained! An eye-catching diamond-tone power amplifier with a rugged design. The extrusion of the mid-range is clear and the sound is slightly firm, but the sound is good, so it seems to go well with jazz and rock. There are small scratches and dents on the exterior as a whole (Mizusaki Ryo)
Maintenance information: 2024.6.1 Maintained (replacement of deteriorated transistors and capacitors in each circuit. Input volume and output relay contact correction. Electric circuit adjustment)
Accessories: copy of instruction manual
Main specifications: 2 mono construction system 100W+100W (8Ω) W425×H170×D285mm 16.5 kg
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
Speaker cable, 2.5 m pair, SOS3+ single connection, Y lug specification on both ends, standard model of the company's speaker cable. There is little dramatization, and the sound is light (Kojima Yosuke)
Accessories: none
Pair tube direct heat triode tube, white base, made in Russia, measured value 84/76, rejected value 58) with replacement box ※Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
Maintained! The culmination of Paragon, late model D44000WXA. The design created by Arnold Wolff is of course undisputed, but Paragon is wonderfully well thought out when it comes to sound quality, and it transcends the line for audiophiles. The combination of the reverberation of each unit and the late enclosure is the final form Paragon aims for. The beautiful way of making a plump, floating sound is unique (Yamato Yuki)
Maintenance information: 2024.5.31 maintained (exterior cleaning/repair/gloss adjustment, horn paint black paint woofer back grill repair driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement) ATT cleaning unit detachable)
Accessories: none
Main specifications: D44000WXA low range 38cm cone type LE15H+ medium range horn type 376+H5038p+ high range horn type tweeter 075 network LX5+N7000 crossover 500Hz/7000 Hz impedance 8Ω output sound pressure level 96dB allowable input 125W size W2640 x H902 x D740 mm weight approx. 300 kg
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
Sold 1 bottle EF86/6267 compatible ball, military high reliability tube mesh measurement value 46 (rejected value 33), seems to be made by GEC due to the structure. Comes with a white box ※The measured values indicate GM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi)
Maintenance information: 2024.5.31 Maintained (power switch replaced. Output relay replacement. (Switch and volume contact correction)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
The price has been reduced! 2024/4/13 sales price 5,000 yen LINN remote control. Details are unknown, but it is similar to EXOTIK and UNIDISK 1.1 remote controls. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.13 operation confirmed (infrared checked)
Accessories: none
Hamilex compact 4-tier rack. The design is simple and you won't get tired of it. The shelves can also be adjusted, making it easy to use. The screw holder on the reinforcing column rotates idle and the screw cannot be stopped completely. There are blows and scratches on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Top plate load capacity: 100 kg or less Shelf board load capacity 50 kg or less Bottom plate load capacity 100 kg or less Total load capacity 250 kg W591 x H600 x D550 mm Weight 31.5 kg
The price has been reduced! 2024/5/16 The CD mechanism has been replaced with Denon at a sales price of 35,000 yen! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/24 sales price 128,000 yen A digital amplifier equipped with a Tripath class T PWM amplifier IC. It beautifully expresses the sense of energy and description. Gain can also be switched on the back, and it is compatible with a wide range of input sources. On the exterior, there are oxidation and scratches on the manufacturer logo. Serial 100210015 (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: instruction manual, power cable, spike
Main specifications: output 150W+150W (8Ω) 240W+240W (4Ω) W420 x H98 x D395 mm weight 13 kg
Dayton Audio's small power amplifier. Designed to be just the right size for a desktop, this is one that can be loud enough for a small speaker. It also has a headphone jack, so it can also be used as a headphone amplifier. The exterior is dull. Serial V200004300 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: AC adapter
Main specifications: 60W+60W (4Ω) W117 x H44 x D79 mm dead weight 1.23 kg
※1 bottle only. The RCA cable uses a 0.6 m 6N-7N hybrid conductor and twin core structure. The cable is thick and powerful in the mid-range, making it a great cable for vintage audio. There is slight dullness on the plug part (Murakoshi Yoichi)
Maintenance information: 2023.7.20 Continuity confirmed
Accessories: none
※There is no problem with operation, but since it is cheap, it will be handed over as is. A unique digital amplifier technology “VL Digital” has been introduced to reproduce high-resolution sound more vividly in a PC environment, making it easy to enjoy as a desktop speaker. The color on the top plate has faded and there are dents (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 40W+40W (4Ω) playback frequency range 50Hz to 100kHz digital IN sampling frequency 32, 44.1, 48, 96, 192 kHz/24 bit size Rch: W169 × H263 × D240 mm Lch: W169 × H263 × D215 mm Weight Rch: 6.4 kg Lch: 4.3 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/16 sales price 99,800 yen Maintained! A speaker that allows you to enjoy the powerful sound of JBL. A vertical twin that uses bi-radial horns for the tweeter and is developed with an upper and lower 20cm woofer. Sound pressure, which is characteristic of horns, is uniformly distributed within the area, and you can experience a wide service area. The exterior has been beautifully finished due to maintenance. Serial 5340-015070 5340-015071 (Asaine Tomoho)
Maintenance information: 2024.5.16 Maintained (exterior cleaning/touch-up saran net cleaning/frame repair/paint tweeter maintenance (magnetic fluid removal/cleaning/center adjustment in the magnetic circuit gap, left and right sound pressure difference adjustment, internal urethane replacement) woofer maintenance (edge replacement, gasket preparation and installation) unit detachment)
Accessories: saran net
Main specifications: output sound pressure level 92 dB frequency characteristics 35 Hz to 20 kHz W318 x H965 x D413 mm weight 34 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
This wooden speaker stand is ideal for small and medium speakers. The height is 44cm, making it easy to adjust the listening point. A hard urethane cushioning material is attached to the 4 corners of the top plate (Oikawa Tetsuji)
Accessories: none
Main specifications: top plate W340 x D245 mm height 440 mm bottom plate W380 x D 340 mm 5 kg
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
The price has been reduced! 2024/5/17 sales price 49,800 yen Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches and line scratches. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
※Since it is cheap, it will be handed over as is. DSD compatible network audio player. Equipped with WIFI, the D/A converter is compatible with DSD 5.6 MHz and 192 kHz/32 bit, the same as those used in super audio CD players. It is a model with high cost performance. Recommended for those getting started with network audio. There is a line wound. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: DSD (2.8 MHz/5.6 MHz) AIFF (192 kHz/24 bit) AIFF, WAV, FLAC (192 kHz/24 bit) Apple Lossless (96 kHz/24 bit) wireless LAN standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n compliant W434 x H73 x D297 mm 2.9 kg
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg