XLR male to XLR female cable 1.0m enables highly transparent transmission even in environments with high hum, noise, EMI, and RFI. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original bag (alternative)
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 9,800 yen. ※1 bottle only. A coaxial 2-way speaker with unknown details, very similar to Pioneer's PAX series. I was able to check the sound output, but I couldn't open the box. It seems that it can also be used as a center speaker, etc. There are many cracks, creases, and scratches (Murakoshi Yoichi)
Maintenance information: 2023.11.17 sound output confirmed
Accessories: none
Main specifications: W385 x H575 x D365 mm 16.2 kg (actual measurement)
The price has been drastically reduced. 2024/6/6 sales price 79,800 yen Maintenance has been completed, such as edge softening treatment and exterior repairs. The successor to the DS-505 with a DUD boron dome in the high range. It is a model set to be the standard for the CD era, and the sound connection between each unit is smooth, and the sense of stability in the mid to low range is attractive. You can see a feeling of use, such as appearance, dullness, corrosion, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (edge softening treatment, exterior repair/cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system 6 ohms playback frequency band 30 Hz to 40,000 Hz output sound pressure level 90 dB W390 x H720 x D377 mm 33 kg
The price has been reduced. 2024/6/14 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good. Serial AWY15201102862 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: remote control, power cord
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The price has been reduced. 2024/6/13 sales price 54,800 yen headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
The price has been reduced. 2024/6/16 sales price 79,800 yen The company's standard front load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
The price has been reduced. 2024/6/17 sales price 59,800 yen Equipped with a titanium-coated 7th generation Uni Q driver. Atmospheric sound quality with a wide range. It comfortably plays vocals, chamber music in small groups, etc. Exterior, there are only 3 banana red and black caps on the SP terminal, and in addition to the jumper cable being general-purpose, there is a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: saran net, spikes, jumper cables (general-purpose products)
Main specifications: 3-way 3-speaker frequency characteristics 40Hz to 40kHz W220 x H865 x D372 mm 14.5 kg
The price has been reduced! 2024/6/16 sales price 34,800 yen A high sound quality floating board that combines special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Significant sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Tomoho Asaine)
Accessories: none
Main specifications: size 350 x 450 mm height 58 mm weight 6.0 kg
The price has been reduced! 2024/6/7 sales price 15,000 yen TAOC audio board. Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminate. It prevents resonance on the floor and provides stable bass. The exterior has scratches on the side, and there is a feeling of use such as a line scratch on the top plate (Asaine Tomoho)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The price has been drastically reduced. 2024/6/21 sales price 128,000 yen Maintained! LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. There are threads and dullness throughout the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.21 Maintained (each replaced due to faulty switching power supply control IC and capacitor capacity loss. Since an improved type is used as the control IC, a reset capacitor specified by the manufacturer is installed to ensure compatibility).
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The price has been reduced! 2024/6/23 sales price 25,000 yen Popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. The exterior has a feeling of use such as dullness and small scratches. Serial 11040004 (Tomoho Asaine)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box instruction manual power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
Sound quality can be expected to improve simply by controlling the resistance value of the cable with an acoustic conditioner, which can be said to be a combination of AET's unique technology, and connecting it between the existing cable and the amplifier. The exterior has scratches on the printing, and there is dullness on the terminal part (Mizusaki Ryo)
Accessories: none
Main specifications: width 40 x total length 170 mm compatible cable 4.5 mm (up to 14 sq m)
*Ordering a genuine brand-new remote control. Maintained by the manufacturer, including the replacement of a genuine new pipup! Mid-level model compatible with SACD. Equipped with a uniquely developed SACD/CD drive mechanism. The low frequency base has a firm sense of stability, and you can enjoy music with relaxed sound quality on both SACD/CDs. Recommended for those who want to enjoy SACD casually. The exterior is dull and has small scratches (Sasaki Shota)
Maintenance information: 2024.6.23 manufacturer maintained (laser pickup, loading belt, CD board capacitor replacement. (Others, inspection of each part, sound test)
Accessories: Power cable ※Remote control is being ordered
Main specifications: output terminal RCA · OPTICAL · COAXIAL · multi-channel SACD/frequency range 2 Hz to 100 kHz SNR 113 dB dynamic range 107 dB CD/ frequency range 2 Hz to 20 kHz SNR 118 dB dynamic range 100 dB dimensions W434 x H135 x D330 mm weight 7.4 kg
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. There is paint removal on the screw hole (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Lead wires are missing. A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The RCA cable uses a 1.2 m pair of ultra-high purity 6N+ high purity oxygen-free copper wire hybrid conductors. Due to the special structure of the plug part, it comes into contact first from the ground part, so there is no noise when inserting the cable. There is a light feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Lead wire missing. Lightweight ADC headshell similar to SAEC ULS-2. The finger tip is slightly longer and the shape is easy to hold. The exterior has small scratches, abrasions, and dullness over time (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Main specifications: dead weight 6g
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
*Currently sold. Luxman vacuum tube hybrid premain amplifier. This product was designed as an upper model of the LXV-OT7. The vacuum tube ECC802S is on the front part, the volume has been increased in size from the previous model, the input terminals are gold-plated, the speaker terminals are banana compatible, and some other parts have been changed to solid aluminum, so the finish is particular about appearance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W192 × H107 × D98 mm 1.0 kg (actual measurement)
*Currently sold. A Luxman vacuum tube hybrid premain amplifier sold from the Mook book series of Ongakunotomosha Stereo magazine. A hybrid configuration with a 12AU7 vacuum tube in the front part and an A/B grade analog amplifier in the power section. You can easily enjoy the vacuum tube sound. The exterior is about dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Operation confirmed
Accessories: power cable
Main specifications: output 5W+5W (4Ω) input RCA2 system W180 × H80 × D90 mm 0.7 kg (actual measurement)
MODEL501 minor change model. It is a model in which the output was raised to 0.4 mv, and the length of the cantilever was slightly shortened to improve trace capability. Excellent sharpness and straight bandwidth balance (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: needle cover
Main specifications: MC type oval solid diamond output voltage 0.4 mV dead weight approx. 8 g needle pressure range 1.4-1.8 g dead weight 8 g
A hybrid board with iron balls sandwiched between them. It is mainly used as an undercarriage for small speakers. It's a well-balanced board that has a sense of volume and isn't too tight. There is noticeable peeling of the veneer on the exterior and sides, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: load capacity approx. 150 kg W300 x H55 x D400 mm 8.5 kg
1.0 m pair of unspecified XLR cables. The plug is made by Neutrik. The sheath material is hard but flexible and easy to handle. The exterior is dull and has a feeling of use (Tomoho Asaine)
Accessories: none
*Only 3 are 180mm pole (19mm diameter) quadraspires option, silver poles. If you are looking for additional poles such as Q4 or Q4D, don't miss it. There are small scratches and dullness on the exterior (Tomoho Asaine)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
Both inside and outside have been maintained! A floor-type speaker with a round baffle and vertical twin, and thorough attention to materials. The sense of density and high response sound that firmly inherits the TAD philosophy is attractive. The dynamic and speedy high range with the TD2001 driver and horn using Japanese maple wood is attractive. The exterior has bumps and small scratches on the sides. Serial 00206 00210 (Yonejima Satoshi)
Maintenance information: 2024.6.20 Maintained (exterior cleaning/touch repair, woofer maintenance: correction of resonance locations such as 2 floating edges, unit detachment)
Accessories: saran net
Main specifications: 2 way 3 speaker bass reflex floor type woofer 25 cm cone type x 2 horn type tweeter x 1 (beryllium diaphragm used) Alnico crossover frequency 1.2 kHz impedance 6 Ω maximum input 300 W 93 db W370 x H1 210 x D586 mm 85.0 kg
The price has been drastically reduced. 2024/5/16 sales price 64,800 yen A woofer unit equipped with an SMC magnetic circuit that achieves significant reduction in distortion by adopting SMC material (soft magnetic compound) for the pole piece part of the magnetic circuit is mounted. You can enjoy the small yet highly textured sound of Dali. There are dull stains on the exterior and edge cone paper, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: saran net
Main specifications: 4Ω 87dB4 59Hz to 27kHz W195xH351xD297mm 7.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/17 sales price 24,800 yen. Q ACOUSTICS 2-WAY BOOKSHELF. Once the setting is decided, you can enjoy a variety of music genres with a sense of scale that makes you doubt the size. There are dents around the upper corner on one side, and there is slight dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, rubber feet
Main specifications: 2 way 6Ω 88dB W170 × H260 × D226 mm 4,6 kg
The price has been drastically reduced. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
The price has been reduced! 2024/6/21 sales price 118,000 yen Maintained! The first α907 model. The alpha series has the highest overwhelming power and amount of information in the series, yet enhances the texture of the mid to high range. Due to Sansui's unique α-X balance circuit, it is an attractive car with a high sense of signal and a clear outline. There are scratches, dullness, etc. on the exterior. Serial 64611138 (Jun Tamai)
Maintenance information: 2024.6.21 maintained (switch disassembly/polishing/grease application (tone, turnover, source direct, subsonic, muting, loudness, processor, power amplifier direct, MM/MC, input selectors) output relay headphone relay replacement bias adjustment volume replacement solder repair/main volume/other volume switch cleaning interior and exterior Inspection and cleaning DC/bias adjustment operation confirmation)
Accessories: copy of instruction manual
Main specifications: effective output 190W+190W (6Ω) 180W+180W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 28.0 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/7 sales price 89,800 yen ※The woofer cone is highly deformed, so it's cheap. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/8 sales price 89,800 yen You can enjoy the voluminous bass with highly efficient and heavy corn paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are small scratches etc. on the exterior. Serial 7413 10417 (Tomonori Asaine)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The disposal price has been reduced! (Member price not applicable) 2024/6/7 sales price 79,800 yen DSD compatible network audio player. It is possible to play music files on DLNA1.5 compliant media servers such as PCs and NAS connected to a home network. It is also equipped with a USB TypeA/TypeB terminal. A high-capacity external hard disk, iPod/iPhone, USB memory input, a maximum 384 kHz/32 bit high-resolution sound source, and an asynchronous USB DAC function that enables native playback using a DSD sound source have also been realized. The exterior has a feeling of use such as dullness. Serial NJIV000297JP (Asaine Tomo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control manual power cord
Main specifications: sampling frequency 32 to 192 kHz DSD 5.6 MHz/2.8 MHz, compatible format DSF FLAC WAV MP3 WMA AIFF ALAC digital input/optical/coaxial iPod/iPhone USB memory external USB hard disk network terminal LAN (100base-TX/10base-T) W435 x H121 x D339 mm 12.5 kg
The price has been reduced! 2024/6/22 sales price 29,800 yen ※6 month warranty. DSD compatible network player. An entry model that omits the USB-DAC and aims to reduce costs. It supports high-quality sound playback from a wide range of sources, such as Wi-Fi and Bluetooth. This model is ideal as an introduction to network audio. There is a feeling of wear on the exterior (Tamai Jun)
Maintenance information: 2024.6.22 sound output confirmed
Accessories: Remote control instruction manual, power cable, connection cable, antenna
Main specifications: Compatible sampling rate PCM32 to 192 kHz DSD 2.8/5.6 MHz SNR 110 dB dynamic range 100 dB (PCM, audible band) W440 x H104 x D329 mm weight 6 kg
The price has been drastically reduced. 2024/6/19 sales price 278,000 yen Maintenance was completed in 2024/5. This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. The wood cabinet has also been beautifully finished due to repairs (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: [303] W550 x H113 x D220 mm weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Maintained. A horn-shaped tweeter developed for the D Series high range using plastic edges. 8Ω specification, compatible horn is CO-800. In addition to being sharp, it is characterized by a precise and delicate sound. Overall, there are dullness, small scratches, paint peeling, etc. (Oikawa Tetsuji)
Maintenance information: 2024.6.23 Maintained (distortion, vibration repair: magnetic circuit slit corrosion prevention, various parts stop noise, complete maintenance)
Accessories: none
Main specifications: Mid-high range driver, hard duralumin dome, plastic edge, frequency characteristics, 800 to 20,000 Hz, 102 dB, diameter 108 mm x D110 mm, 3.7 kg/bottle
※Since there are needle tip repair marks, it is inexpensive. A higher-level model that uses 6N copper as the coil winding for the standard DL-103 cartridge. Compared to the original model, the high range has been increased, resolution has been increased, and the sense of distortion has been reduced. There are no bends (Tamura Eiji)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: needle cover
Main specifications: round needle tip 16.5 microns output voltage 0.25 mV playback frequency 20 Hz to 45 kHz impedance 14 ohms needle pressure 2.5 g dead weight 8.5 g
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. There are no noticeable scratches, but the needle cover is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: instruction manual, original box
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
Silver interconnect with a 1.2m pair of RCA cables and LINN premium cables. Double shield construction using plenty of high-grade copper. The sound quality is natural, the resolution is high, and the deep bass is deep. Overall, there is a slight stickiness. (FUJISAWA KOSHI)
Maintenance information: 2024.6.23 continuity confirmed
Accessories: no accessories
This is an arm base with a built-in Ikeda arm elevation mechanism that can be adjusted while playing. In addition to the IT-345CR-1 and IT-407CR-1, it can also be used on FR-64, 66, etc. with a shaft diameter of φ25 mm. The body housing is machined from stainless steel, and the arm fixing part has a hybrid structure of stainless steel and brass. With a single dial operation, you can smoothly adjust the height even while playing a record, and you can maximize tone arm and cartridge performance. Good enough that you can't feel a feeling of use (Murakoshi Yoichi)
Accessories: stabilizer fixing tool, wrench, instruction manual, original box,
Main specifications: Height adjustment range: 10 mm up and down, pace mounting hole dimensions: φ41 mm, arm shaft: φ25 mm
Custom made internal wiring silver wire specification! It appears to be an unused item. Includes optional genuine phono cord HBC-MS-5000DR. A dynamic balance type long arm completed by Ikeda Isamu to surpass the masterpiece FR-66S he created himself. The materials for the main parts have been hybridized, and external influences have been thoroughly eliminated by adopting a spherical center block. The cable uses a double 2-core shield, a hybrid structure made of high-purity 6N copper and OFC materials (Murakoshi Yoichi)
Maintenance information: 2024.6.20 continuity confirmed
Accessories: instruction manual, original box, head shell, arm cable, template
Main specifications: Dynamic balance type, total length 388 mm, effective length: 307 mm, overhang: 12 mm, needle pressure application range: 0 to 5 g, arm adjustment range: 20 mm to 60 mm
The i.LINK cable is 2.0m silver-coated, and both insulators use solid high density polyethylene. Both ends of the connector are 4-pin type (Tomonori Asae)
Accessories: original box
Maintained in 2023/12! A special edition of the PM-80. A popular Marantz model from the 90s that has both luster and strength. This is a geeky model where you can enjoy the difference in tone by switching between A grade and AB grade. There is a feeling of use, dullness, and small scratches. Serial MZ009119060022 (Yamato Yuki)
Maintenance information: 2024.6.23 sound output confirmed
2023.12.24 Maintained (replacement of defective output relay contacts. Polish the selector switch and other disassembly contacts and apply contact cleaner. I/O pin jack polish. Power supply circuit soldering correction)
Accessories: copy of instruction manual
Main specifications: AB class 100W+100W (8Ω) A grade 20W+20W (8Ω) size W454 x H165 x D380 mm weight 17.5 kg
The price has been reduced. 2024/6/1 sales price 13,800 yen ※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it's cheap. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches and paint chips on the top plate (Ryo Mizusaki)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
The price has been reduced! 2024/6/12 sales price 37,800 yen RCA line cable 1.0 m pair model using plasma (powder of metallic compounds) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006156 (Fujisawa Yukishi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
The price has been reduced! 2024/6/12 sales price 37,800 yen*Model using 1.0 m pair plasma (powder of metallic compounds) shield for No. 3 HOT XLR cable. The synergistic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10005476 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 79,800 yen A dedicated arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.)
Accessories: none
Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
The price has been drastically reduced. 2024/6/19 sales price 24,800 yen. *Currently sold. YAMAHA bookshelf speakers. It is a high-resolution compatible model created by the designer of the “Soavo” series, which was highly acclaimed worldwide, and although it is an entry model, it is designed with particular attention to sound. Of course, the traditional high frequencies of the NS Series are excellent, and the fact that bass reflex dubbing, which is common on bookshelves, is suppressed is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: saran net, original box
Main specifications: 2-way bass reflex type (non-magnetic) playback frequency band 55 Hz to 45 kHz impedance 6 ohms allowable input 40 W maximum input 120 W output sound pressure level 87 dB crossover frequency 2.8 kHz W183 x H320 x D267 mm weight 6.1 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/5 sales price 22,000 yen. ※Since there is a lot of deterioration in the exterior, it is inexpensive. A popular DIATONE bookshelf. Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg