A thick, highly rigid heavyweight shell prepared by Orthophone for cartridges other than the SPU series. It is an easy-to-use headshell with a flat cartridge ground surface and excellent adhesion (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. Serial 0903-2G2 (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
This is Wilson Benesch's straight arm. Carbon fiber with excellent vibration damping properties is used for the pipe. Coupled with the one-point design, it is possible to achieve sound with extremely no stagnation, precise, and rich in spatial reproduction. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: arm cable
Main specifications: static balance type, effective length 280 mm, compatible cartridge weight 5 to 16 g
The disposal price has been reduced! Member discounts are not applicable. 2024/6/1 sales price 378,000 yen Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. It has strong extrusion and is excellent compatibility with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. (Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
1.8 m PSE standard power cable “BLACK MAMBA” featured from the fastest snake on Earth. As the name suggests, the sound is supple and high speed. And while it has high resolution, it is designed to be fully flat and balanced to suppress peaks. The letters have disappeared on the sheath and there are some cracks on the coating (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
The disposal price has been reduced! Member discounts are not applicable. 2024/6/15 sales price 328,000 yen This is a special version with the new material changed to a cyanide ester printed circuit board and the main internal parts have been renewed. The deep sound, which has both transparency and suppleness while having a sense of sharpness and speed, makes the music fully enjoyable is attractive. The range and sound field are wide, and you can enjoy classical music with sufficient quality. As for the exterior, there is a feeling of use such as rubbing or scratching on the top plate. Serial 2873 (Yamato Yuki)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: Remote control instruction manual copy power cord
Main specifications: input imbalance (RCA) 4 system balance (XLR) 2 system output balance (XLR) 1 system unbalance (RCA) 1 system W400 x H98 x D364 mm 16 kg
Using a 1.8 m pair of RCA cables, PC-Triple C conductors, we pursue cost performance while maintaining high quality. It has a reputation for its delicate, neutral tone with a high signal-to-noise ratio (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
The disposal price has been reduced! Member discounts are not applicable. 2024/6/6 sales price 99,800 yen with box! A pre-main amplifier with clear sound without unnecessary dramatization. You can enjoy the company's unique tone, which is clear yet powerful and sharp. Both the exterior has a modern and smart impression. You can use it regardless of genre. There is a small scratch on the top plate on the exterior. Serial 130140015 (Jun Tamai)
Maintenance information: 2024.6.6 sound released and confirmed
Accessories: original box manual, remote control, power cable, spike
Main specifications: 75W+75W (8Ω) 115W+115W (4Ω) W420 × H88 × D214 mm 7.0 kg
1 sheet only. This is a Krypton audio board. It contains iron ball sand, which has a large specific gravity, and is excellent at preventing vibration from the device. The sound quality is thick and powerful. There is not a very noticeable scar (Tomonori Asaine)
Accessories: none
Main specifications: size W300 x H55 x D400 mm weight 8.5 kg load capacity 150 kg
Comes with Digilink30 3rd generation “S” version of the DIGITAL 2000 system. After undergoing drastic sound quality improvements to the Sledgehammer, the next-generation S version is a masterpiece whose overwhelming sound sharpness compared to the 1st generation 2000 system, sharp instantaneous power, and texture in the mid to high range reached a climax. Please enjoy the WADIA sound so you can fully enjoy the amount of information on the CD. There are dullness and small scratches appropriate to the model year (Oikawa Tetsuji)
Maintenance information: 2024.6.26 Operation confirmed (DIGILINK and 2000S are connected via ST link, fiber OK. (Connect to Digilink with BNC from WT-2000S and get 44.1kHz sound)
Accessories: instruction manual, power cable, connection cable
Main specifications: sampling frequency 32/44.1/48kHz [DIGILINK30] input BNC x 3 W216 x H70 x D230 mm weight 2.6 kg [DIGITAL201C] W330 x H58 x D314 mm weight 5.6 kg [DIGITAL2000] W430 x H70 x D330 mm weight 8.5 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. There are dents on the front panel and footprints on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.6.26 Maintained (helical gear replacement, operation, sound test)
2024.6.6 Maintained (laser pickup replacement, sound output test)
2024.4.17 Maintained by the manufacturer (inside the CD mechanism, loading belt, tray opening/closing SW replacement. The HF level for laser pickups is within the regulations and is fine now. Sound output test)
Accessories: remote control, instruction manual
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Compatible with micro SME short tonearm bases 3009 and 3010. There are dirt scratches on the exterior (Tamura Eiji)
Accessories: none
Main specifications: Compatible players: BL-101, BL-91, BL-111, etc.
MICRO heavyweight record stabilizer Since it is heavy, it has an excellent effect on discs that are warped and difficult to play. There is a small scratch (Tamura Eiji)
Accessories: none
Main specifications: 79 mm in diameter, 30 mm in thickness, 1 kg in weight
Using a 0.7 m pair of RCA cables, PC-Triple C conductors, we pursue cost performance while maintaining high quality. The range is wide and the sound is flat balanced (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
XLR cable, 0.6 m pair, 6N ultra-high purity copper+OFC copper hybrid conductor structure, natural and relaxed sound. The good quality of the wire comes out in the sound. On the exterior, there is a tear in the coating (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
1.8 m high performance standard power cable for high grade audio devices that is a hybrid of 3 types of soft copper wires: “6N high purity copper conductor,” “pure silver coated OFC,” and “high purity oxygen-free copper” (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
The power cable uses a 1.8 m ultra-high purity 6nCu (copper) /high-purity 5nCu/pure silver-coated OFC, and high-purity oxygen-free copper hybrid conductor. The texture of the instrument has improved, and you can feel the expansion of the space and the sense of range (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Phono cable 1.2m 5PIN-XLR terminal specification DIN plug is a straight 8NCu, 4-type hybrid twin core phono cable using rare 8N copper. The amount of information is rich, and the power and sense of scale expression based on the bass range are outstanding (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Due to the sharp followability of the knife edge, the clear and cohesive sound quality still boasts high performance today. The exterior is slightly oxidized and dull. Serial 07031R (Satoshi Yonejima)
Maintenance information: 2024.6.26 operation confirmed
Accessories: connection cable
Main specifications: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g
The 1.3 m pair Art Link Series RCA cable uses a PCCC and Hi-OFC hybrid material, contains titanium that is resistant to vibrations and external noise, and uses a sheath and rheostomer insulator as the center conductor (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
Maintained. Amber cap!! MonitorRed15inch. The appeal of this unit is that they can play not only classical music, which TANNOY excels at, but also jazz sauce. The sound quality is solid when starting up, but it is a wonderful unit that also has an elegant sound typical of Tannoy. Please take this opportunity to buy rare units that are hard to come by! (KOBAYASHI Hitoshi)
Maintenance information: 2024.6.25 maintained (unit maintenance: magnetic circuit gap cleaning center adjustment for both low and high frequencies, network maintenance: frequency characteristic check, 4-pin terminal cleaning)
Accessories: network
Main specifications: Official name: Monitor 15 inch 38 cm coaxial 2 way playback frequency band 23 Hz to 20 kHz input impedance 16 ohms magnet weight 5.9 kg crossover frequency 1 kHz maximum input 50 W total weight approx. 6.5 kg
An unused dead stock item with a 10.0m pair of RCA cables has been opened for confirmation. SAEC name cable designed to be optimal for amplifiers with an output impedance of 15 ohms or less. If you are looking for a long RCA cable, don't miss it. The plug is discolored and there is stickiness on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: original box, instruction manual, seal
Speaker cable, 2.2 m pair, Y lug specification, 11 gauge pure OFHC: 99.994% appearance, in addition to the large feeling of use of the Y lug, dullness, threads, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
THORENS INSULATOR SET OF 3. It comes with a screw-type height adjustment function, but as expected, it is made in Switzerland, and the accuracy of how the screw rotates is excellent, and correction at extremely subtle pitches is possible. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 35 mm, height 30 to 35 mm, dead weight 53.1 g (actual measurement)
Set of 8 THORENS spike insulators. Use it for amplifiers and speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: original box (does not close due to broken fasteners)
Main specifications: diameter 35 mm height 40 mm dead weight 48.2 g (actual measurement)
*Currently sold. It is inexpensive because the left and right shapes, the color of the cone paper and back logo, and model year are different. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6Ω maximum input 150W output sound pressure level 86db W232 × H154 × D172 mm 2 kg
The 4-piece insulator set has a unique three-dimensional special support structure, making effective use of the beneficial vibrations of the equipment and preventing the occurrence of harmful vibrations. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: original box
Main specifications: load capacity 25 to 50 kg/4 pieces, diameter 50 x 35 mm, weight 135 g/1 piece
It is a headshell that is standard mounted on the IT-345CR1 and IT-407CR1, which are the company's tone arms, and the geometry settings assume that a 9-MUSA series cartridge is attached, and the finish is the same chrome plated finish as the arm. Of course, cartridges made by other companies can also be installed. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Continuity confirmed
Accessories: none
Main Specifications: Dead Weight: 17.2 g Body Material: Machined Hard Aluminum Exterior Finish: Chrome Plated Finish Connector Side Terminal: Rhodium Plated
※It is inexpensive because it has cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. There is dirt and dust on the exterior (Tamura Eiji)
Accessories: none
An Audionix shell that acted as an agent for Autophone in the 1970s. It feels like the MG-10 is slimmer and lighter, and the letters and curves of the brand name are stylish. *Lead wire missing (Fujisawa Yukishi)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: No accessories
Main specifications: Glass fiber reinforced resin mold, dead weight 8g
The disposal price has been reduced! Member discounts are not applicable. 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2024/5/17 sales price 378,000 yen The flagship model of a Macintosh power amplifier with silver panel specifications. It is characterized by its strong, dense sound. It has strong extrusion and is excellent compatibility with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
The disposal price has been reduced! Member discounts are not applicable. 2023/5/5 sales price 29800 yen*Currently sold. Woofer edge softening treatment. A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
This model was fully restored by our company in 2016. Furthermore, exterior maintenance and interior maintenance have also been completed. The popular LUXMAN classic 38 series. The graininess and fineness of the sound have been brilliantly revived. The soft, warm, and thick sound is soothing from the core (Sasaki Shota)
Maintenance information: 2024.6.25 Maintained (parts replacement, input/output waveform confirmation, load test (1 kHz sine wave, 8 ohm load: 28 W+28 W, actual measurement), sound output test. Exterior repair/polishing/painting)
2016.11.6 Maintained (9P socket, volume/BAL/BACK, TC VR, headphone jack, SP terminal board, RCA terminal, resistor, coupling capacitor, AC cord replacement. Lever SW overhaul, adjustment, and characteristic check are OK. Clear cabinet finish Fill in square putty, color repair. (Top plate grill paint)
Accessories: copy of the manual
Main specifications: 30W+30W frequency characteristics 10Hz-50kHz vacuum tube/12AX7 x 3, 12AU7 x 3, 6267 x 2, 50C-A10 x 4, W476 x H190 x D335 mm 18 kg
RCA-XLR cable 1.0 m pair No. 2 hot specification Oyaide plug 99.9997% pure silver conductors have improved signal conductivity and are characterized by flat sound quality compared to other copper cables. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: none
A higher-level analog player system model in the Pioneer DJ series. While following the interface of the SL-1200, operability has been improved. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: instruction manual power cable
Main specifications: quartz servo direct drive aluminum die-cast platter diameter 332 mm 33/45/2 speed universal type S shaped tone arm static balance type W453 x H159 x D353 mm 14.6 kg
A USB compatible CD player that looks like a recent model. Audio files stored on iPods, USB memory devices, etc. can be played from the USB port on the front panel. Furthermore, it is an easy-to-use player that supports playback of files in WMA, MP3, and AAC formats recorded on CD-Rs, etc. There is a feeling of use such as abrasions and dullness. Serial MZ001120002919 (Asaine Tomoho)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control instruction manual power cord
Main specifications: 1 analog output system, 2 digital outputs, 1 USB input terminal W440 × H106 × D339 mm 6.6 kg
*Currently sold. This model is equipped with Marantz's advanced DAC. The high cost performance is attractive. Clear sound and detailed reproducibility are key points. It also makes modern sauces sound great. This player is recommended for those who want to get started with audio or those looking for a secondary unit. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: copy of the instruction manual, power cable, remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz dynamic range 100 dB power consumption 14 W size W440 x H104 x D339 mm weight 5.1 kg
※PSE standard product! In addition to increasing the number of PB-150 to 6 ports, a t2.0mm thick bonded steel plate was adopted for the chassis to increase rigidity. Furthermore, stainless steel material equivalent to that of advanced models is used for the outlet panel on the top. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.6.25 continuity confirmed
Accessories: instruction manual, power cable, original box
Main specifications: size W300 x H69 x D126 mm
SACD player The high range, which is smooth and stretches well, and the middle range is attractive with its firm thickness. The fine texture is an appeal unique to Marantz. The quality of the headphone output circuit is outstanding in this class, making it a great model for those who use headphones a lot. The exterior has a feeling of use over time, such as dullness and scuff marks. Serial 01000610000224 (Hatano Mamoru)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: Remote control instruction manual copy power cable
Main specifications: SACD player “CS4397” D/A converter made by Cirrus Logic, size W440 x H128H x D339 mm, weight 8.0 kg
1 bottle only A rare 16Ω early model. An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural and deep sound. Even though it's LE175, it is smooth and has a highly structured texture. The exterior has no paint peeling or gaskets. Serial 3943 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement, distribution terminal contact part cleaning, terminal mold crack replacement, insulating bushing replacement, diaphragm stain cleaning, DCR (3943/10.5 ohm diaphragm no scratches))
Accessories: No accessories
Key Specifications: 1 inch driver, 16 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
Comes with original box. Sennheiser Bluetooth 5.0 compatible headphones. It is a product that is compatible with Sennheiser's proprietary SmartControl application, has a 30-hour battery life, and high cost performance. Low frequency playback is good! The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box
Main specifications: frequency band 18 Hz to 22,000 Hz adapter 3.5 mm cable length 1.5 m weight 238 g
The price has been reduced! 2024/6/22 sales price 498,000 yen including the unit, interior and exterior have been refreshed and maintained! The unit used in the C56 Dorian S1 type is the same as the later L101. The depth of the rich low frequencies of the Alnico LE14A is tight with Lanzaroi edges, and the high frequencies with a dry atrium unique to the 175DLH make you hear vintage sounds unique to the Lancer. The combination of a marble top plate and a beehive horn creates a tasteful sound that resonates a lot. Exterior maintenance has been carried out on the exterior, but there are a few small chips in the marble top plate (Hiroki Aso)
Maintenance information: 2024.1.25 maintained (exterior repair/polishing/oil finish, top plate, marble polish, lattice repair/polishing/painting, backside fabric replacement front and rear baffle, hakama, honeycomb horn coating, woofer maintenance (softening treatment/cone paper coating) driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound-absorbing material replacement terminal contact cleaning) ATT cleaning/terminal retightening unit detachable)
Accessories: saran net
Main specifications: 2 way, 2 speakers, bass reflex system, floor type, 35.5 cm cone type for low range (LE14A), high range horn type (LE175DLH), network LX10 impedance 8 ohms, W440 x H620 x D310 mm, 39.0 kg/1
The price has been reduced. 2024/6/18 sales price 138,000 yen manufacturer maintenance completed! Luxman primen amplifier. It is an exquisite unit with a fine mid-range unique to pure Class A amplifiers. Even difficult sources such as string music, female vocals, etc. are played in a glamorous manner. There is a feeling of use due to appearance, dullness, paint deterioration, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.18 Maintenance completed (phono changeover switch/cartridge switch disassembly and cleaning, cleaning of other contacts, solder correction and readjustment, contact cleaning because the turnover switch is out of stock ※ there is some noise at present)
Accessories: copy of instruction manual
Main Specifications: 50W+50W (8Ω) Class A Operation DuoBeta Circuit S Pre-heating Function Line Phase Sensor Mount Frequency Characteristics 10 to 100 kHz Dimensions W453 x H174 x D460 mm Weight 21.4 kg
The price has been reduced! 2024/6/14 sales price 89,800 yen speaker cable 2.0m pair terminal Y lug specification The old type of speaker cable Electrum uses carefully selected vintage wires. Each has a different structure on the HOT and GND sides. Clear sound with good separation. The exterior has frayed cloth (Tamura Eiji)
Maintenance information: 2024.6.13 operation confirmed
Accessories: No accessories
Denon's 110th anniversary model. MC type cartridge with a dedicated headshell. It is a special specification that combines the standard model DL-103 with a specially designed headshell developed with the aim of bringing out 100% cartridge performance. There are no needle bends. Serial 7479 (Murakoshi Yoichi)
Maintenance information: 2024.6.18 sound output confirmed
Accessories: original box, needle cover, instruction manual, special table, head shell
Main specifications: MC type output voltage 0.3 mV impedance 40 ohms needle pressure 2.5 g (± 0.3 g) dead weight 18.5 g (including headshell)
Fully maintained! 2-way floor speaker with double woofer (stagger) +1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.6.20 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn paint, saran net replacement, woofer maintenance: edge replacement/cone paper coating, terminal cleaning/screw replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching (SW cleaning, terminal cleaning/screw replacement unit detachable)
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
The price has been reduced. 2024/5/14 sales price 238,000 yen Maintained. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (each SW, VOL cleaning, push button dismantling and cleaning, companion pot failure → replacement, lamp deterioration → replacement, panel peeling correction (text part is not possible), operation check (the gap cannot be completely removed)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
※2-tier type. The size is one size smaller than the company's Q4D, etc., so the size setting is just right for those using compact systems such as LINN. There are scratches on the exterior (Mizusaki Ryo)
Accessories: 4 optional spike bases
Main specifications: W395 x H250D x 395 mm 3.7 kg (actual measurement)