Maintained. A power amplifier representing the Macintons of yesteryear. The power to make a 38cm woofer sound lightly with impressive driving power and a sense of scale with a rich sense of volume are impressive. It is a powerful machine that has high overall strength and is one of the most popular McKinns in history. The bright mid to high range sound goes well with modern speakers. As for the exterior, there are small scratches, scuffs, etc. on the top plate. Serial JKE1638 (Tomonori Asaine)
Maintenance information: 2024.6.28 maintained (FET replacement, power stage Tv check, meter, regulator C replacement lamp replacement, each SW cleaning, operation check panel cleaning)
Accessories: instruction manual copy terminal cover power cable
Main specifications: rated output 500W+500W MONO 1,000W output frequency band 20Hz to 20kHz SNR 115dB (at rated output) W445 x H255 x D491 mm weight 49.9 kg
This is the first AccuPhase high-capacity clean power supply to be introduced by Hi-Fi. The effects of waveforming can be confirmed by using a liquid crystal panel that realizes input/output waveform observation. A 20 parallel push-pull amplifier circuit using bipolar transistors is used for the amplifier section, achieving a high output of 1200 VA at the same time as a low distortion ratio (Yoichi Murakoshi)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: power cable, instruction manual, original box
Main specifications: rated output capacity 1200VA, rated output voltage AC100V ± 1V, rated output current 12A, 10 AC outlets, W465 x H243.4 x D500.2 mm 41.8 kg
A dedicated CD player. It is also equipped with a DSD-compatible USB-DAC. Equipped with 4 AK4490EQ, Asahi Kasei's famous DAC. The S/N ratio has also been improved by reducing the weight of the floating part and improving the DAC part from the previous DP-410. Although it is an entry class, it has high sound quality and is of high quality as a high quality CD console. The exterior has a feeling of use such as dullness. Serial D7Y121 (Murakoshi Yoichi)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: remote control, power cable, RCA cable, instruction manual, control panel driver setup guide
Main specifications: USB-DAC PCM384/DSD11.2 MHz (ASIO) frequency characteristics 0.7 Hz to 50 kHz SNR 117 dB power consumption 13 W W465 x H151 x D393 mm 14.0 kg
Refined model equipped with LS-R0i high contact reliability rotary switch. In addition to the rotary switch, this line selector has carefully selected high-quality parts for connectors and internal wiring, and has a housing design that prevents external noise and vibration, so it can transmit the original sound as it is. The exterior is generally good (Tomonori Asae)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: none
Main specifications: RCA cable 3ch line selector W250 x H64 x D128 mm 2.4 kg
It looks like a novelty from the Sansui Vintage series. If placed under C-2301, etc., not only the sound quality but also the profound sense of appearance will increase (Murakoshi Yoichi)
Accessories: none
Main specifications: 4-sided polish W484 x H30 x D440 mm 17.5 kg
Set of 4 spikes from Jeff Roland A spike holder is also included. The know-how on resonance countermeasures cultivated over many years is being used to the fullest (Mizusaki Ryo)
Accessories: original box, instruction manual
Main specifications: spike 32 x 18.5 mm, 21 g/piece, base 32 x 3.5 mm, 21 g/piece
Component cable 10.0m brings out the original high-definition video from a DVD with digital component recording as it is, giving it a sharp black depiction and a sharp three-dimensional effect (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
Set of 4 spikes from Jeff Roland A spike holder is also included. The know-how on resonance countermeasures cultivated over many years is being used to the fullest (Mizusaki Ryo)
Accessories: original box, instruction manual
Main specifications: spike 32 x 18.5 mm, 21 g/piece, base 32 x 3.5 mm, 21 g/piece
Speaker cable 2.0m pair 11 gauge pure OFHC: 99.994% exterior, large feeling of use of the Y lug, and dullness, threads, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
Speaker cable with 3.5 m pair soldered ends. It is a solid sound that clearly shows the backbone of the LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
※This is a rare Torrance extra thick speaker cable with only 1 speaker cable with an unprocessed 5.0 m end! The shadows and depth come out deep (Murakoshi Yoichi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
YAMAHA MC type cartridges. It plays strings and vocals with high transparency and freshness. Both stylus and cantilever are good (Ryo Mizusaki)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: needle cover
Main specifications: 10 Hz to 45 kHz output voltage 0.5 mV impedance 50 ohms needle pressure 2.0 g dead weight 8 g
A unique set of 4 insulators that can adjust the number of springs according to the weight of the main body being used. Each insulator is arbitrarily adjusted using 5 leaf springs to ensure a maximum load capacity of 12.5 kg per insulator (maximum 50 kg when using 4). It is a special insulator that pursues vibration damping properties. You can see the exterior, dullness, abrasions, and feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: spring type insulator, machined brass body, bronze leaf spring (press stamped), diameter approx. 40 mm, height 30 mm (36 mm with 5 springs included), approx. 200 g/piece, maximum load capacity 50 kg (when 4 insulators are used, 5 springs are loaded)
※The needle tip has been replaced with a JICO needle. This is Type 4 of the classic V15 series. The impression is that sharper resolution and a sense of dynamism have been added than Type 3. It is a high-performance cartridge that has extremely high tracing ability and conveys the feeling that it picks up the sound engraved in the sound groove without omission (Mizusaki Ryo)
Maintenance information: 2024.6.28 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.25 g internal impedance 47 kΩ dead weight 7 g
Power cable 2.8 m inherits the structure and concept of the first generation of the hugely popular series BLACK MAMBA. Confidence in Oyaide (Murakoshi Yoichi), which has been further refined by the precision conductor 102 SSC
Maintenance information: 2024.6.28 continuity confirmed
Accessories: original box
Denon's premium analog player. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. Record playback with excellent stability and high freshness is attractive. The exterior has a feeling of use such as dullness and small scratches. serial
(ASAINE Tomonori)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: power cable headshell connection cord is not included
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
Equipped with an MM/MC position that LINTO did not have. It is a phono equalizer that can pursue optimal analog playback sounds. This model was raised to a standalone phono equalizer based on the sound quality level of URIKA, an equalizer dedicated to the LP12. You can enjoy clean and clear sound quality. The exterior has a feeling of use such as dullness. Serial 1410727 (Tomoho Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: Power cable (general purpose)
Main specifications: mm/MC compatible frequency band 2.5 to 40 kHz mm gain +44 dB/48 dB load resistance value 51/49/47/45 kΩ MC gain +54 dB/64 dB load resistance value LOW31/37/42/53/70/100/170 Ω High580/670/810/1 kΩ W381 x H80 x D355mm 4.4 kg
A 2-way system using an Orasonic 8cm full range unit and super tweeter, which was an appendix to DigiFi 19 and 20. A glass fiber diaphragm is used for the mid to low range, and the high range is matched to the full range, making it possible to reproduce from 2 to 40 kHz. SP terminals are bi-wire compatible (Murakoshi Yoichi)
Maintenance information: 2024.6.21 sound confirmed
Accessories: jumper cable
Main specifications: 8cm full range+soft dome 8Ω 88dB crossover unknown W140 × H279 × D180 mm 2.0 kg
*Currently sold. A control amplifier with a straight-through design. It is an amplifier that focuses only on improving sound quality. There are also plenty of phono circuits, so beginners and advanced players can enjoy it. There is a feeling of use on the exterior, and paint peeling and small scratches are scattered on the top plate. Serial 157570 (Asaine Tomoho)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: none
Main specifications: PHONO (MM/MC) with MONO/STEREO switching W430 x D317 x H66 mm 5.2 kg
Power cable 2.8m Oyaide power cable V-XY/V-XX, made exclusively for the VONDITA-X based on the highest-grade plug M1/F1, are used as plugs and connectors. The cable is based on 102 SSC and uses a silk interposition, a drain line with a double helix structure, and an exterior sheath combining different materials, and is committed to thorough damping (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: original box
Maintained! A shell round needle model. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. The exterior has dullness etc. due to use over time (Asaine Tomo)
Maintenance information: 2024.6.28 Maintained (pedestal installation, damper adjustment)
Accessories: original box needle cover
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
Maintained! A round needle model that has become valuable. The high range is soft and the bass is thick, and it is characterized by the thickness of the midrange represented by the bobbon-shaped frequency characteristics. The suppleness of the tone creates a sound field that you won't get tired of listening to. It is dull and has a feeling of use. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.28 Maintained (vibration system replacement shell replacement)
Accessories: original box
Main specifications: MC type output voltage 0.2 mV needle pressure 3 to 5 g internal impedance 2 ohms weight 31 g
2-tier rack specification. The surface of the base plate is manufactured using a unique manufacturing method in which the surface is covered with a transparent acrylic plate, etc., and a fiber cloth is laid on a heat-resistant glass mold, epoxy resin for bonding is poured into an infrared oven for about 15 minutes, then an even thinner reinforced cloth is layered in three layers and dried naturally over about 12 hours. Carbon fiber itself exhibits excellent characteristics as a surface material. There is a feeling of use on the exterior due to small scratches etc. (Tomoho Asae)
Accessories: none
Main specifications: stage inner dimensions W498xH182xD354mm outer dimensions W608xH 379xD465mm base SRX-1B (outer dimensions W608xH164xD465) for top placement SRX-1 (outer dimensions W608xH219x D465)
Maintained! A CD/SACD player compatible with many formats in the high-resolution era. It is a higher-level model that incorporates a lot of technology, and the built-in 32 bit/192 kHz DAC allows you to enjoy pure sound with a wide range during SACD playback. It is designed with high sound quality for CDs and compressed files, so it is recommended for those aiming for high sound quality in any format. The exterior is good with no noticeable scratches (Ryo Mizusaki)
Maintenance information: 2024.6.28 Maintained (check for abnormal noise when opening the tray. Loading part dismantling, grease replacement, lens and disc table cleaning. I played each disc and checked analog, USB, and S/PDIF sounds)
Accessories: remote control, instruction manual, power cord
Main specifications: 32 bit/192 kHz twin D/A converter jitter reduction IC twin power transformer damper tray equipped with CDR-R/RW (MP3 MPEG-4 AAC WMA), DVD-R/RW (DSD [DSD disk], MP3, MPEG-4, AAC, WMA), iPod, iPhone, and iPad compatible W435 x H130 x D329 mm weight 7.8 kg
Maintained! A famous instrument and first generation preamp. The coat is different from today's tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crackling sound image and exhilarating sounds are a habit. The exterior has dullness and scratches. Serial C5W817 (Fujisawa Yukishi)
Maintenance information: 2024.6.28 Maintained (rotary switch, push switch disassembly contact cleaning. Contact grease application. Input selector, volume contact cleaning. Electrolytic capacitor replacement. Replaced because the resistant outer skin has deteriorated and cracked. The microphone terminal was damaged, so it was replaced. (Check the operation of each input/output)
Accessories: power cord
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
※Since there is a dent in the arm pipe, it is inexpensive. A popular classic model with a long arm. It is precise and delicate, and in addition, it has a very smooth and loud sound, which clearly shows the characteristics of a long arm. It is a versatile arm that can handle various weights and needle pressures, from lightweight to heavyweight. The exterior is slightly dull. Serial 02924R (Fujisawa Yukishi)
Maintenance information: 2024.6.24 Operation confirmed
Accessories: copy of instruction manual, arm cable, screws, spacers
Main specifications: long arm static balance, total length: 400 mm, execution length: 307.3 mm, heavy needle pressure compatible, compatible cartridge, 9.5 to 34 g, needle pressure adjustment: 0 to 5 g
An audiocraft headshell that uses a perfect lock pin in addition to its sturdy construction with a hard aluminum molding. It has a degree of perfection that even feels beautiful in form, and the connections are solid, bringing out the full performance of the cartridge. (FUJISAWA KOSHI)
Maintenance information: 2024.6.28 continuity confirmed
Accessories: no accessories
Main specifications: Perfect Lock pin, hard aluminum molding, dead weight 13.7 g