Maintained! This is an attractive premain with a good sound. It is equipped with a large toroidal transformer, so you can enjoy powerful bass reproduction unique to this age. The built-in MC boost transformer is of high quality, and you can listen to rich and deep record sounds. There are spots and small scratches on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.27 Maintained (output relay replacement, button installation, tape pin jack replacement, selector lamp replacement, switch disassembly, polishing grease application (tone, subsonic, muting, loudness, all input selectors, phono, reck-out), protector circuit transistor, capacitor replacement, resistor replacement, solder repair, each volume, switch cleaning, internal inspection, cleaning, operation confirm. The selector buttons and tape pins are free of charge because they are reused products. (For stabilization, it takes about 15 to 20 seconds for the relay to operate.)
Accessories: none
Main specifications: 150W+150W (8Ω) with 4 line inputs, phono MM/MC, W466 x H161 x D431 mm 17.5 kg
Digital cable, 1.0m, BNC terminal specification, fully isolated, can be used not only as a 3-layer shielded digital cable, but also as a clock cable. There is dullness around the plug, rubbing against the sheath, and dirt (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
A speaker system incorporating Altech's 20cm coaxial 2-way unit into a self-made enclosure. The sharpness is the same, but the impression is different from Altech of yesteryear, adding clarity and delicacy. The exterior is good, but the saran net is slightly easy to remove (Mizusaki Ryo)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: saran net
Main specifications: W335 x H590 x D345 mm weight 12.1 kg (actual measurement) 20 cm full range 8 Ω maximum input 32 W
Easy to use 2P type 6-port tap. Suitable for PSE standard audio systems up to mid-level. The exterior is dull and has small scratches. Serial 814001 (Tamura Eiji)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
Main specifications: Power cable section 1.8 m
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. It is a cartridge that can be recommended to a variety of people, from analog beginners to experts. Serial 5449 (Tamura Eiji)
Maintenance information: 2024.6.27 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Maintained by the manufacturer! The last CD-only model in the 1650 series. Equipped with a well-balanced AL24 processing circuit. It supports the foundation of music with a stable mid to low range. The large amount of information peculiar to dedicated CDs is valuable nowadays. You can see a feeling of use on the exterior, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.25 Manufacturer maintained (headphone VR disassembly and cleaning. Loading belt, tray opening/closing SW, CD traverse mechanism replacement. Top cover cleaning. (Others, inspection of each part, sound test)
Accessories: copy of manual, power cord, remote control (replacement)
Main specifications: 1 digital output system, 1 coaxial system, 1 analog output system, frequency characteristics 2 Hz to 20,000 Hz W434 × H135 × D340 mm 12.7 kg
This model uses 4 types of wire, mainly untreated high-purity 6N copper at the 2.5 m end of the speaker cable. Of course, with the starcard system, where 2 of the 4 cores are twisted and connected to each other, it is also possible to use each of the 4 cores as bi-wiring by dividing them into high and low frequencies (Murakoshi Yoichi)
Maintenance information: 2024.6.27 continuity confirmed
Accessories: none
An attractive high CP machine with a dense and glossy sound quality. It is a CD player with a sense of density and luster, and also has an analog feel. Stable playback can be expected by adopting a turntable system. Excellent cost performance, recommended even for beginners. The exterior is dull and has a feeling of use. Serial MB1010143AS (Jun Tamai)
Maintenance information: 2024.6.27 sound output confirmed
Accessories: instruction manual remote control
Main specifications: frequency characteristics 2 Hz to 20 kHz dimensions W420 x H130 x D330 mm weight 10.0 kg
Maintained! An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a feeling of use on the exterior, such as dullness, small scratches, and peeling paint. Serial 33780 33949 (Hiroki Aso)
Maintenance information: 2024.6.27 Maintained (diaphragm installation adjustment pad, 2 dampers, replacement, distribution terminal, contact part cleaning, 8 insulation bushings, replacement, diaphragm dirt cleaning, DCR (33941/6.2 ohm diaphragm with small scratches)
DCR (33941/6.0 ohm diaphragm without scratches)
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2024/6/13 sales price 29,800 yen ※6 month warranty. This is the DCD-100 thin CD player that is the best match for the DRA-100 network receiver in the DENON design series. Full digital processing is possible by combining it with the DRA-100. Of course, it's attractive enough as a standalone CD player, and it's a high cost performance machine that allows you to listen to smooth sound without habit (Sasaki Shota)
Maintenance information: 2024.6.13 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: slot-in CD mechanism 384 kHz/32 bit compatible D/A converter compatible with MP3 and WMA data disc playback size: W280 ✕ H71 ✕ D305 mm 4.2 kg
The price has been reduced. 2024/5/20 sales price 19,800 yen ※Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
The price has been reduced. 2024/4/29 sale price 24,800 yen A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/17 sales price 49,800 yen tall tower audio rack. Made of powder-coated, scratch-resistant metal and tempered safety glass made in Italy. It has rounded glass front shelves for a custom made look. It includes a management system to hide power cords and interconnect cables. The exterior has a feeling of use such as dullness and small scratches. *Shipping costs will be estimated separately (Asaine Tomoho)
Accessories: none
Main specifications: shelf glass plate thickness 6 mm load capacity 23 kg size 635 x 610 x 1,550 mm weight 46 kg
The disposal price has been reduced! (Member price not applicable) 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
The disposal price has been reduced. Members are not eligible for discounts. 2024/6/14 sales price 238,000 yen Maintained! A popular preamp sold during the heyday of analog. The mid-range is more glossy and has a sexier vibe than those after C29. That rich sound can truly be said to be a preamp representing the golden age of Mackins'. There are scratches, small scratches, and partial peeling on the exterior. Serial AK1482 (Tamura Eiji)
Maintenance information: Maintained on 2017.7.8 (main volume contact cleaning (slight gang error may occur because parts are not available). Other switches, volume contact cleaning. Amplifier board electrolytic capacitor replacement. Panel lamp replacement. RCA terminal replacement. Correction of areas where panel peeling can be fixed. Check the operation of each input/output)
Accessories: instruction manual (English)
Main specifications: input terminals, RCA4, PHONO input, 2 pre-out systems, W430 x H140 x D365 mm, 13.8 kg
The disposal price has been reduced! Member discounts are not applicable. 2024/6/1 sales price 378,000 yen Maintained! The flagship model of the Macintosh power amplifier with a silver panel. It is characterized by its strong, dense sound. It has strong extrusion and is excellent compatibility with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches and stains on the exterior, and rust can be seen on the top plate and back panel (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (transistor in driver board, LDR, capacitor deterioration, GAIN, VOL noise, meter board capacitor deterioration, power supply board capacitor deterioration, meter lamp, display lamp deterioration → replacement. (Meter dismantling terminal lead wire soldering treatment, MODE SW dismantling cleaning, operation check, power stage check OK)
Accessories: power cord, copy of instruction manual
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. There are dents on the front panel and footprints on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.6.26 Maintained (helical gear replacement, operation, sound test)
2024.6.6 Maintained (laser pickup replacement, sound output test)
2024.4.17 Maintained by the manufacturer (inside the CD mechanism, loading belt, tray opening/closing SW replacement. The HF level for laser pickups is within the regulations and is fine now. Sound output test)
Accessories: remote control, instruction manual
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Compatible with micro SME short tonearm bases 3009 and 3010. There are dirt scratches on the exterior (Tamura Eiji)
Accessories: none
Main specifications: Compatible players: BL-101, BL-91, BL-111, etc.
XLR cable, 0.6 m pair, 6N ultra-high purity copper+OFC copper hybrid conductor structure, natural and relaxed sound. The good quality of the wire comes out in the sound. On the exterior, there is a tear in the coating (Tamura Eiji)
Maintenance information: 2024.6.26 continuity confirmed
Accessories: none
It is an arm that inherits the basic design of the 3012 and has increased versatility with all players through downsizing. It is also attractive that the 2-split main weight is compatible with lightweight cartridges as well as heavyweight cartridges such as SPUs. Due to the sharp followability of the knife edge, the clear and cohesive sound quality still boasts high performance today. The exterior is slightly oxidized and dull. Serial 07031R (Satoshi Yonejima)
Maintenance information: 2024.6.26 operation confirmed
Accessories: connection cable
Main specifications: static balance type effective length 237 mm cartridge mounting weight range 9.5 to 34 g (including shell) needle pressure variable range 0 to 5 g
Speaker cable, 2.2 m pair, Y lug specification, 11 gauge pure OFHC: 99.994% appearance, in addition to the large feeling of use of the Y lug, dullness, threads, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 continuity confirmed
Accessories: none
*Currently sold. It is inexpensive because the left and right shapes, the color of the cone paper and back logo, and model year are different. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6Ω maximum input 150W output sound pressure level 86db W232 × H154 × D172 mm 2 kg
※It is inexpensive because it has cracks. An acoustic lens mounted on JBL monitor speakers such as the 4343 series. By wearing it, the sound of the horn, which is too strong, is moderately diffused and calmed down. There is dirt and dust on the exterior (Tamura Eiji)
Accessories: none
The disposal price has been reduced! Member discounts are not applicable. 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2024/5/17 sales price 378,000 yen The flagship model of a Macintosh power amplifier with silver panel specifications. It is characterized by its strong, dense sound. It has strong extrusion and is excellent compatibility with JBL large monitor speakers. The dynamism in the mid to low range, which is difficult to obtain with current Mackin power amplifiers, is attractive. There are scratches, dullness, and discoloration in places (Kojima Yosuke)
Maintenance information: Maintained on 2020.8.26 (2 input volumes, 4 semi-fixed volumes, 2 RCA plugs, 12 lamps, 8 electrolytic capacitors, replacement input mode switch disassembly cleaning, card edge cleaning, soldering, bias and offset check, output sound check)
(*The interior and exterior have been cleaned.)
Accessories: power cable
Main specifications: 500W+500W (1000W when mono) equipped with power guard circuit W483 x D465 x H263 mm 60.3 kg
A USB compatible CD player that looks like a recent model. Audio files stored on iPods, USB memory devices, etc. can be played from the USB port on the front panel. Furthermore, it is an easy-to-use player that supports playback of files in WMA, MP3, and AAC formats recorded on CD-Rs, etc. There is a feeling of use such as abrasions and dullness. Serial MZ001120002919 (Asaine Tomoho)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: remote control instruction manual power cord
Main specifications: 1 analog output system, 2 digital outputs, 1 USB input terminal W440 × H106 × D339 mm 6.6 kg
SACD player The high range, which is smooth and stretches well, and the middle range is attractive with its firm thickness. The fine texture is an appeal unique to Marantz. The quality of the headphone output circuit is outstanding in this class, making it a great model for those who use headphones a lot. The exterior has a feeling of use over time, such as dullness and scuff marks. Serial 01000610000224 (Hatano Mamoru)
Maintenance information: 2024.6.25 Operation confirmed
Accessories: Remote control instruction manual copy power cable
Main specifications: SACD player “CS4397” D/A converter made by Cirrus Logic, size W440 x H128H x D339 mm, weight 8.0 kg
1 bottle only A rare 16Ω early model. An impressive 1-inch driver with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural and deep sound. Even though it's LE175, it is smooth and has a highly structured texture. The exterior has no paint peeling or gaskets. Serial 3943 (Fujisawa Yukishi)
Maintenance information: 2024.6.25 maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement, distribution terminal contact part cleaning, terminal mold crack replacement, insulating bushing replacement, diaphragm stain cleaning, DCR (3943/10.5 ohm diaphragm no scratches))
Accessories: No accessories
Key Specifications: 1 inch driver, 16 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced! 2024/6/14 sales price 89,800 yen speaker cable 2.0m pair terminal Y lug specification The old type of speaker cable Electrum uses carefully selected vintage wires. Each has a different structure on the HOT and GND sides. Clear sound with good separation. The exterior has frayed cloth (Tamura Eiji)
Maintenance information: 2024.6.13 operation confirmed
Accessories: No accessories
The price has been reduced. 2024/5/14 sales price 238,000 yen Maintained. Genuine Electri 100V specification. Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. There is a line wound on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.14 maintained (each SW, VOL cleaning, push button dismantling and cleaning, companion pot failure → replacement, lamp deterioration → replacement, panel peeling correction (text part is not possible), operation check (the gap cannot be completely removed)
Accessories: copy of instruction manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
The price has been drastically reduced. 2024/6/6 sales price 79,800 yen Maintenance has been completed, such as edge softening treatment and exterior repairs. The successor to the DS-505 with a DUD boron dome in the high range. It is a model set to be the standard for the CD era, and the sound connection between each unit is smooth, and the sense of stability in the mid to low range is attractive. You can see a feeling of use, such as appearance, dullness, corrosion, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (edge softening treatment, exterior repair/cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system 6 ohms playback frequency band 30 Hz to 40,000 Hz output sound pressure level 90 dB W390 x H720 x D377 mm 33 kg
The price has been reduced. 2024/6/14 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. The exterior is generally good. Serial AWY15201102862 (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: remote control, power cord
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The price has been reduced. 2024/6/13 sales price 54,800 yen headphone amplifier for electrostatic ear speakers. Sound quality has been improved and wide range has been achieved, such as an all-stage direct connection A class DC amplifier configuration that does not use coupling capacitors, a custom-made 2-axis quadruple volume, and an XLR input terminal. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.6.13 sound output confirmed
Accessories: power cable
Main specifications: input XLR, RCA with RCA through out frequency characteristics DC to 90kHz rated input level 100mV/100V output W150 x H100 x D360 mm 3 kg
The price has been reduced. 2024/6/16 sales price 79,800 yen The company's standard front load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
The price has been reduced. 2024/6/17 sales price 59,800 yen Equipped with a titanium-coated 7th generation Uni Q driver. Atmospheric sound quality with a wide range. It comfortably plays vocals, chamber music in small groups, etc. Exterior, there are only 3 banana red and black caps on the SP terminal, and in addition to the jumper cable being general-purpose, there is a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: saran net, spikes, jumper cables (general-purpose products)
Main specifications: 3-way 3-speaker frequency characteristics 40Hz to 40kHz W220 x H865 x D372 mm 14.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The price has been drastically reduced. 2024/6/21 sales price 128,000 yen Maintained! LINN network audio player with integrated amplifier. The built-in amplifier makes it easy to use, and you can easily enjoy network audio. It sounds soft and natural, and is perfect for those who want to enjoy music casually. There are threads and dullness throughout the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.21 Maintained (each replaced due to faulty switching power supply control IC and capacitor capacity loss. Since an improved type is used as the control IC, a reset capacitor specified by the manufacturer is installed to ensure compatibility).
Accessories: remote control, power cord
Main specifications: Compatible audio files FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequencies 7.35k, 8k, 11.025k, 12k, 14.7k, 16k, 22.05k, 24k, 29.4k, 32k, 44.1k, 48k, 88.2k, 96k176.4k, 192 k compatible bits 16 - 24 bit input terminal Ethernet analog audio RCA x 3 front AUX x 1 MM Phono digital audio coaxial RCA (SPDIF) x 3 TOSLINK (Optical) x 3 output terminal SP terminal 100W+100W W381 x H80 x D355 mm weight 5.0 kg
The price has been reduced! 2024/6/23 sales price 25,000 yen Popular vacuum tube headphone amplifier. By adopting a double triode vacuum tube push-pull system, you can enjoy powerful and dynamic sound. It is also attractive that it has an impedance changeover switch that can be used with various headphones. The exterior has a feeling of use such as dullness and small scratches. Serial 11040004 (Tomoho Asaine)
Maintenance information: 2024.6.23 Operation confirmed
Accessories: original box instruction manual power cord
Main specifications: 650 mW+650 mW 12 AU7 x 2 sticks 16 to 600 ohms W130 x H170 x D259 mm 3.5 kg
*Ordering a genuine brand-new remote control. Maintained by the manufacturer, including the replacement of a genuine new pipup! Mid-level model compatible with SACD. Equipped with a uniquely developed SACD/CD drive mechanism. The low frequency base has a firm sense of stability, and you can enjoy music with relaxed sound quality on both SACD/CDs. Recommended for those who want to enjoy SACD casually. The exterior is dull and has small scratches (Sasaki Shota)
Maintenance information: 2024.6.23 manufacturer maintained (laser pickup, loading belt, CD board capacitor replacement. (Others, inspection of each part, sound test)
Accessories: Power cable ※Remote control is being ordered
Main specifications: output terminal RCA · OPTICAL · COAXIAL · multi-channel SACD/frequency range 2 Hz to 100 kHz SNR 113 dB dynamic range 107 dB CD/ frequency range 2 Hz to 20 kHz SNR 118 dB dynamic range 100 dB dimensions W434 x H135 x D330 mm weight 7.4 kg
Lead wires are missing. A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.18 continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
The RCA cable uses a 1.2 m pair of ultra-high purity 6N+ high purity oxygen-free copper wire hybrid conductors. Due to the special structure of the plug part, it comes into contact first from the ground part, so there is no noise when inserting the cable. There is a light feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Lead wire missing. Lightweight ADC headshell similar to SAEC ULS-2. The finger tip is slightly longer and the shape is easy to hold. The exterior has small scratches, abrasions, and dullness over time (Murakoshi Yoichi)
Maintenance information: 2024.6.22 continuity confirmed
Accessories: none
Main specifications: dead weight 6g
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.21 Operation confirmed
Accessories: instruction manual, power cable
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
1.0 m pair of unspecified XLR cables. The plug is made by Neutrik. The sheath material is hard but flexible and easy to handle. The exterior is dull and has a feeling of use (Tomoho Asaine)
Accessories: none
*Only 3 are 180mm pole (19mm diameter) quadraspires option, silver poles. If you are looking for additional poles such as Q4 or Q4D, don't miss it. There are small scratches and dullness on the exterior (Tomoho Asaine)
Accessories: No accessories
Key Specifications: 180mm length/19mm diameter optional pole
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/7 sales price 89,800 yen ※The woofer cone is highly deformed, so it's cheap. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/6/8 sales price 89,800 yen You can enjoy the voluminous bass with highly efficient and heavy corn paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are small scratches etc. on the exterior. Serial 7413 10417 (Tomonori Asaine)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The disposal price has been reduced! (Member price not applicable) 2024/6/7 sales price 79,800 yen DSD compatible network audio player. It is possible to play music files on DLNA1.5 compliant media servers such as PCs and NAS connected to a home network. It is also equipped with a USB TypeA/TypeB terminal. A high-capacity external hard disk, iPod/iPhone, USB memory input, a maximum 384 kHz/32 bit high-resolution sound source, and an asynchronous USB DAC function that enables native playback using a DSD sound source have also been realized. The exterior has a feeling of use such as dullness. Serial NJIV000297JP (Asaine Tomo)
Maintenance information: 2024.6.7 operation confirmed
Accessories: remote control manual power cord
Main specifications: sampling frequency 32 to 192 kHz DSD 5.6 MHz/2.8 MHz, compatible format DSF FLAC WAV MP3 WMA AIFF ALAC digital input/optical/coaxial iPod/iPhone USB memory external USB hard disk network terminal LAN (100base-TX/10base-T) W435 x H121 x D339 mm 12.5 kg