The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable. Sturdy single wire. Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
RCA cable, 9.5 m pair, long type, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. The sheath is rubbed and dirty (Kojima Yosuke)
Accessories: none
RCA-XLR cable, 1.5m pair, 3rd hot specification, XLR male terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
XLR-RCA cable, 1.5m pair, No. 3 hot specification, XLR female terminal, 3-core shielded audio cable, this is a must-hear model as a cable connecting between the company's preamplifiers and power amplifiers. It is rubbed and dirty on the sheath (Kojima Yosuke)
Accessories: none
Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm
RCA cable 5.9 m pair This is an early model before the terminator module, which is also a characteristic of the company, was adopted. It's a sound with good sound separation and a good sense of localization. There is a lot of dirt and rubbing on the exterior (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/6/2 sales price 79,800 yen A dedicated arm base for attaching the GLANTZ tonearm MH-1200S to the LUXMAN record player PD-191A. Attach it to the back left side of the PD-191A main unit. The exterior is generally good (Takahashi Nobuyuki)
Accessories: mounting screws
Main specifications: Material stainless steel W128 x H15 x D128 mm 787 g (actual measurement)
The price has been reduced. 2024/6/28 sales price 198,000 yen This is the successor to MYTEK's hugely popular USB-DAC, LIBERTY DAC. Whereas the first generation DAC chip was the ES9018K2M, this model is equipped with the ES9038Q2M. There is no need to install troublesome drivers, and it supports up to PCM384 kHz and DSD 11.2 MHz simply by connecting. Of course, it is also compatible with MQA, and its compact yet large-scale sound is attractive. The exterior is generally good. Serial 10424-2225-049 (Tomonori Asaine)
Maintenance information: 2024.6.28 Operation confirmed
Accessories: instruction manual power cable (general-purpose product) *Remote control missing
Main specifications: input terminal USB (B) x 1, RCA coaxial x 2, TOSLINK x 1, AES/EBU x 1 output terminal XLR balance x 1, 6.3mm headphone x 1, headphone amplifier output 300 mA compatible sampling rate PCM384 kHz/32 bit when connected to USB, DSD256 (DoP) W140 x H44 x D225 mm 2 kg
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
It has a strong tobacco smell and is inexpensive because it has many scratches and veneer peeling. The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. ※The trolley is not included (Sasaki Shota)
Accessories: nothing
Main specifications: front load horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
The price has been reduced. 2024/6/16 sales price 79,800 yen The company's standard front load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 62226 (Yonejima Satoshi)
Maintenance Information: 2024.3.25 Maintained (INPUT DIN 4P replacement, internal Tr, C, R all checks. DIN4P-RCA female cable created. Operation check, pattern solder processing)
Accessories: power cable, connection cable
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg