Maintained by Accuphase Service! A core power amplifier representing the Accuphase in the mid-80s. Neat sound design, just like Accuphase. A highly complete car that harmonizes high resolution and thickness in an exquisite balance. It is a famous model that was used as a reference power amplifier for various FM magazines at the time. There are scratches on the side corner and front (Sasaki Shota)
Maintenance information: 2024.4.27 Maintained by the manufacturer (due to poor output relay contacts, both A/B were replaced with sealed types. Front, push button switch contact cleaning. Level volume left and right disassembly contact cleaning. (The meter and logo lamp were replaced, the carbon resistance in the power amplifier Ass'y was exchanged left and right, and internal inspection and cleaning characteristics were checked)
Accessories: manual
Main specifications: output 250 W+250 W (8 ohms) frequency characteristics 20 Hz to 20,000 Hz gain 28.0 dB load impedance 2 to 16 ohms damping factor 500 W 481 x H218 x D445 mm weight 33.5 kg
Includes remote control and wood cabinet! A moderately good synthesizer FM tuner. It is a high-performance tuner with high resolution and excellent operability, and allows you to listen to elegant and imposing sounds just like the luxurious exterior stored in a wood cabinet (Sasaki Shota)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: wired remote control, copy of manual, power cable
Main specifications: reception frequency 76.1 MHz to 89.9 MHz power consumption 25 W dimensions W466 x H188 x D391 mm weight 14.1 kg
A new-generation integrated upgrade that brings out the appeal of unique speakers as much as possible by raising the damping factor to 600 and bringing out the appeal of unique speakers as much as possible. The power amplification stage with 3 parallel push-pull power MOSFETs allows you to hear more powerful sound than before. There are no noticeable scratches on the exterior. Serial B0X159 (Fujisawa Yukishi)
Maintenance information: 2024.4.20 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: rated output 180W+180W (8Ω) input RCA5 systems, XLR2 system, tape input/output 1 system, pre-out RCA1 system, XLR1 system main in RCA1 system, XLR1 system damping factor 600 size W465 ✕ H181 ✕ D428mm weight 24.6 kg
Balance cable 1.5m pair accuphase OFC series cable is the company's standard cable with thick gold plating and excellent corrosion resistance. The appeal is that it suppresses color dramatization inherent in cables and does not impair the individuality of amplifiers and players. There is dullness around the plug, and there is rubbing and dirt on some sheaths (Kojima Yosuke)
Accessories: none
RCA cable, 1.0 m pair, 2-core shield structure, rhodium-plated plug suppresses sound dramatization and reproduces the individuality of the amplifier and player as it is. The plug shell is dull and discolored a lot, and the LR coloring is deteriorated and damaged, so it is inexpensive (Kojima Yosuke)
Accessories: none
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please do it 1 to 2 times on the label side first, front to back. There is dullness (Daiki Goto)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
The speaker cable uses an untreated single-wire PC-Triplec conductor at the end of the 1.0m pair. It has a carefree, straight sound, and the sound pressure feeling as if the amplifier's output has increased is attractive. There are abrasions and whitening on the sheath ※Since it's a single wire, handling is difficult (Kojima Yosuke)
Accessories: none
The 0.8 m pair end of the speaker cable uses a new polymer polyolefin material with an excellent low dielectric constant of about 1/4 compared to untreated PVC. Using a cab tire structure, you can hear a neutral sound that is strong against disturbance noise and has a sense of stability. There is rubbing dirt on the sheath (Kojima Yosuke)
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Only one speaker cable, 1.8 m, untreated 6N copper at the end, is stress-free, and has straightforward sound quality. Although it is a thick cable, it is flexible and easy to handle (Daiki Goto)
Maintenance information: 2024.3.4 confirmed
Accessories: none
Speaker cable, 0.6 m pair, terminal, unprocessed, stress-free, 6N copper conductor, high resolution, and smooth, natural listening comfort is comparable even when put into a high-end system (Fujisawa Yukishi)
Accessories: none
Speaker cable 0.7 m pair with unprocessed 6N stress-free cable and electromagnetic wave absorption non-magnetic thread. This cable has a natural, smooth sound quality with a wide range, and does not choose a genre (Ryo Mizusaki)
Accessories: none
The price has been reduced. 2023/5/31 sales price 85,000 yen Asahi Lumber horizontal rack. It is a model with plenty of storage capacity and adjustable height. As an audio rack, its performance is high, and it is a stable unit. It is made of full-body natural wood, has a sturdy structure, and is highly decorative. ※Since this is a large item, shipping costs will be estimated separately. There are scratches, threads, etc. on the exterior. Also, felt is attached to the bottom (Takasaki Atsushi)
Accessories: none
Main specifications: W1227×D565×H1060mm
Air-tight KT88 push-pull The modern sound, which combines the soft texture unique to vacuum tubes and the high resolution, is attractive. There are 2 inputs at the front and rear, and the front input can be directly connected to the first stage tube without going through a shielded wire. The front panel is equipped with a meter that can check the optimal operating point of the output tube. There are many scratches on the bottom plate, and there are paint chips, threads, and bumps on the transformer (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: used vacuum tube KT88 x 4, ECC83 x 2, 5814A x 2, 12BH7A x 2, 12BH7A x 2, 80W+80W 8Ω, W415 x H223 x D380 mm, 32 kg