The price has been reduced. 2024/2/20 sales price 15,000 yen. Balance cable A standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.20 continuity confirmed
Accessories: none
The price has been reduced. 2024/3/17 sales price 25,000 yen. ※Colored boots are cheap due to deterioration and damage. The balance cable uses an 8-core multi-hybrid conductor with 2 pairs of 4 types of copper wires arranged in each of the 4 types of 1.0 m pair 7N ultra-thick high-purity copper wire, AgA silver-plated soft copper wire, PCOCC single crystal oxygen-free copper wire, and OFC oxygen-free copper wire. This cable has an excellent balance between sound thickness and stretchability. In addition to the exterior, as described above, dullness, rubbing, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 continuity confirmed
Accessories: none
Maintained by the manufacturer! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. There are no noticeable scratches and it is in good condition (Sasaki Shota)
Maintenance information: 2024.3.23 Maintained by the manufacturer (replaced due to poor capacitor characteristics in each circuit. Replace each lamp due to stress deterioration. Safety checks, pressure resistance tests, operation, and characteristic checks are OK. (Each readjustment and cleaning)
Accessories: manual
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: none
The price has been reduced. 2024/3/6 sales price 45,000 yen Accuphase built-in phono equalizer board. For analog record playback, you can switch MM/MC equalizer gain, set MC input impedance, and subsonic filter ON/OFF with an internal dip switch. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main Specifications: Compatible Models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530,, *In the case of E-550/E-350/E-450/C-2110, MC/MM switching is performed on the panel surface, so there is no need for settings on the board. E-550 E-350 E-450 C-2110
This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
Balance cable 1.5m pair accuphase OFC series cable is the company's standard cable with thick gold plating and excellent corrosion resistance. The appeal is that it suppresses color dramatization inherent in cables and does not impair the individuality of amplifiers and players. There is dullness around the plug, and there is rubbing and dirt on some sheaths (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/1/29 sales price 168,000 yen This is an Accuphase phono equalizer unit. PHONO input can be added to compatible models by installing it from the rear panel. The printed board uses a Teflon base material and is equipped with a dedicated input circuit that matches each MM/MC cartridge (Oikawa Tetsuji)
Accessories: none
Main specifications: Compatible models C-2800 C-2810 C-290 C-290V C-2400 C-2410