Balance cable is a standard 1.5m pair Accuphase balance cable. It is a natural sound that removes disguise to enhance the characteristics of amplifiers and players. As for the exterior, there is room odor on the sheath (Tamura Eiji)
Maintenance information: 2024.3.14 continuity confirmed
Accessories: No accessories
The price has been reduced! 2024/4/3 sales price 15,000 yen A rare 1,400Hz frequency board is in stock! It seems to be an Accuphase special order item. A crossover board that can be used for the F-5/F-15. The damping slope can be changed with an internal switch (Tamura Eiji)
Maintenance information: 2024.4.3 operation confirmed (can be checked with F-15)
Accessories: No accessories
Main specifications: 1400 Hz attenuation slope 12 dB/18 dB switchable
The price has been reduced! 2024/4/25 sales price 59,800 yen Maintained! Comes with a cabinet. Accuphase quartz rock synthesizer FM tuner. A pulse tuning system is used that enables manual station selection with the same feeling as the varicone system. You can enjoy sharp and clear sound typical of Accuphase. The exterior has bumps, scratches, etc. Serial JOY347 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (jumper wire connection due to disconnection of the tuning circuit. System control board corrosion repair pattern check. (Check reception)
Accessories: instruction manual, power cable
Main specifications: synthesizer FM tuner reception frequency 76.1 MHz to 89.9 MHz tuning system quartz rock frequency synthesizer system manual pulse tuning memory 6 stations W445 x H128 (including legs) x D370 mm 8.4 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/26 sales price 148,000 yen Maintained! Although it is a line-only preamp, it also has a total of 8 input systems, so it is convenient for using multiple devices such as CD players. Also, the CD input is equipped with a dedicated buffer amplifier and volume, so you can feel the attention to detail in this model. The exterior has bumps, scratches, etc. Serial J7Y818 (Fujisawa Yukishi)
Maintenance information: 2024.4.26 Maintained (replaced due to offset volume disconnection and poor contact. Due to poor contact with the push switch inside the sealing door, polishing grease was applied to the disassembly contact. The main volume and CD volume contacts have been cleaned. The power circuit capacitor has been replaced. Each input/output operation was checked.)
Accessories: No accessories
Main specifications: line preamplifier, CD dedicated buffer amplifier, CD dedicated input balanced/unbalanced 1 system each, line input 5 systems, 1 output balance system, 2 unbalanced systems, W475 x H135 x D373 mm, 11 kg
1 bottle only. This wire is also used for POWER STANDARD, a power cable with a 2.0m end sold out and finished without treatment. PCOCC-A conductors improve clarity, three-dimensional effect, and spatial expression. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: No accessories
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs, bumps, and dirt marks on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
Good level! Caster specification! ADK 4-tier rack. Natural wood and essential aluminum materials are used, and the design is also high. The main body frame and inner plate are prevented from vibrating with special material spacers. (FUJISAWA KOSHI)
Main specifications: 180mm, 180mm, 230mm from the top of the 4-tier rack post, W600 x H775 x D450 mm, approx. 16 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
※Dividers and dowels are missing, so it's cheap. This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and stains on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg