The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
※Shipping service. This is a brand new item. Mr. Nagase Muneshige called Nazo Otoko, the host of an audio blog popular among high-end audio users around the country. This book is a compilation of records of 15 years of audio exploration that Mr. Nagase has spelled out on his blog. “Double Woofers,” which was formed in the wake of the JBL 4350, is the origin of its activities, and in addition to high-end amplifiers such as Mark Levinson, Claire, and Goldmund and the JBL 4350, high-end devices coveted by enthusiasts, such as Avalon, Apogee, and Full Epilogue, have appeared one after another. A must-read for high-end audiophiles.
All 6 woofers and midrange edges have been replaced! A European-designed tall boy speaker that drastically changed the image of JBL. The combination of gentle treble and unobtrusive low frequencies is truly European modern. It's a great speaker for listening to female vocals and small-group classical music. There are dents, line marks, etc. on the top plate and sides (Oikawa Tetsuji)
Maintenance information: 2024.5.15 maintained (2108H edge replacement and disconnection repair, 2105 edge replacement)
Accessories: jumper plate
Key Specifications: 3 Way 4 Speaker Crossover 300Hz/3KHz 91dB 6Ω W273 × H1130 × D342 mm 25.0 kg
The price has been drastically reduced! 2024/5/15 sales price 148,000 yen The X-DP7, which specializes in DACs, has arrived. By inheriting the performance of the X-DP10 and specializing in DACs, a high signal-to-noise ratio has been achieved. It is also DSD compatible, and it is a high quality car with excellent cost performance. There are no noticeable scratches on the exterior. Serial R10939 (Tamura Eiji)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: digital input: USB x 1, OPTICAL x 2, COAXIAL x 2, AES/EBU x 1, CLOCK x 1 analog input: RCA x 2, XLR x 2 analog output: RCA x 1, XLR x 1 PCM: 24, 32 bit/44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768 kHz DSD: 2.8224, 5.6448, 11.2896 MHz (DoP, (Compatible with ASIO 2.2) W420 x H68 x D320 mm weight 5.9 kg
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been drastically reduced. 2024/1/15 sales price 118,000 yen pair tube 45 special compatible ball straight heat triode fishing rod type filament made in America measurement value 90/86 (rejected value 55) with white box*Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
The price has been drastically reduced. 2023/11/8 sales price 49,800 yen ※The display panel moves when the volume etc. switch is pressed, but this is a specification. Maintained! MICROMEGA D/A CONVERTER It's a well-balanced European tune, and you can listen to chamber music and vocals smoothly. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.9.3 Maintained (replacement of tantalum electrolytic capacitors, replacement of other capacitance electrolyzed capacitors. Various digital signal demodulation tests confirm normal operation. (Rubber foot replacement)
Accessories: none
Main specifications: 1-bit input sampling frequency 32kHz,44.1kHz,48kHz W220×H55×D110mm 1.5kg
The price has been drastically reduced! 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for introductory belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply unit
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The price has been drastically reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
The price has been drastically reduced. 2024/5/10 sales price 468,000 yen Maintained! By installing a double 10-inch (25cm) diameter woofer while equipped with a traditional JBL horn and compression driver, a slim tall boy style is achieved with sufficient low frequency energy. It is an excellent speaker that combines low frequencies with instantaneous power typical of JBL and sharp mid-high frequencies. The exterior is good with no noticeable scratches (Shota Sasaki)
Maintenance information: 2024.5.10 Maintained (magnetic fluid removal/cleaning/center adjustment in the single-sided driver magnetic circuit gap)
Accessories: none
Main specifications: 3-way 4-speaker woofer 100FE-12 scoker 175Nd-3 tweeter 139 Nd playback frequency band 33 Hz to 40 kHz crossover frequency 850 Hz/12 kHz impedance 6 Ω output sound pressure level 92 dB allowable input 250W (RMS) W370 x H1,007 x D368 mm 39 kg
The price has been drastically reduced. 2013/7/23 sales price 298,000 yen Edison disc phonograph. It's a name given by Edison, who created the gramophone, and there seems to be an anecdote where he was amazed and jumped up when he first heard the sound from a cylindrical gramophone he made himself. You can't enjoy the indescribable atmospheric sound anywhere else. A horn that is one size larger than the H19 is used. The exterior also has cracks, peeling, and cracks on the veneer due to aging. Also, rust is conspicuous on the wheels underfoot (Oikawa Tetsuji)
Maintenance Information: 2013.7.23 Maintained
Accessories: handle, snail
Main specifications: horn opening W392 x H260 mm main body W484 x H1140 x D500 mm
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
※The dust cover is missing. Maintained! Sony's first fully automatic player. Equipped with a biotracer that electronically controls all complex movements of the tone arm. An ambitious Japanese work packed with every gadget imaginable at the time! Needle pressure can be adjusted simply by controlling the knob on the front panel, and the applied needle pressure value is digitally displayed. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.27 Maintained (main unit internal inspection grease coating, cleaning) *At low temperatures, an offset will occur when the arm is forcibly fed by manual operation. The current situation is that stable operation is not possible unless the room temperature or the temperature inside the main unit rises to a certain extent (room temperature).
Accessories: none
Main specifications: Crystal Rock D.D. Fully automatic player system, needle pressure adjustment range 0.5 g to 3.0 g, W500 x H175 x D430 mm, approx. 15 kg
The price has been drastically reduced. 2024/2/18 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. Serial AWY15180500756 There are scratches on the top plate on the exterior (Hiura Katsuji)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: remote control power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
The price has been drastically reduced. 2024/4/16 Sales price 118,000 yen Manufacturer maintained! Marantz pre-main made as an amplifier compatible with super audio. The sound, which makes you feel more relaxed and warm than recent models from the company, which have sharp looks, is attractive. The phono is also MM/MC compatible, so there are no omissions. Dullness, there is a small scratch on the top plate (Sasaki Shota)
Maintenance information: 2024.4.16 manufacturer maintained (SP relay defect replacement, front VR main relay nuclear circuit Iida defect correction implementation, other operation inspections)
Accessories: manual, power cable, remote control
Main specifications: 100W+100W (8Ω) Playback frequency band: 5Hz to 100kHz Analog input: 7 systems Analog output: 2 systems Dimensions W458 x H166 x D464 mm Weight 23.0 kg
The price has been drastically reduced. 2024/5/6 sales price 118,000 yen Roon Ready, network player compatible with MQA sound sources. Equipped with two Asahi Kasei flagship DAC chips AK4497, which are now rare, you can fully enjoy high-resolution sound sources. When used as a USBDAC, DSD 22.5 MHz can also be played. Equipped with volume, it can also be used as a digital preamp (Daiki Goto)
Maintenance information: 2024.5.6 operation confirmed
Accessories: remote control, manual, power cable, original box
Main specifications: USB DAC compatible frequency (PCM44.1/48/88.2/96/176.4/192/352.8/384/705.6/768kHz DSD2.8/5.6/11.2/22.5MHz) LAN input compatible frequency (PCM32/44.1/48/88.2/96/176.4/192/352.8/384kHz DSD2.8/5.6 MHz) compatible format (FLAC, Apple Lossless, WAV, AIFF, MQA) W290 x H81.2 x 248.7 mm 3.9 kg
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
The price has been drastically reduced. 2024/4/25 sales price 448,000 yen Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant sound is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration replacement, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration replacement, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
The price has been drastically reduced. 2023/9/28 sales price 700 yen. *Unopened item I opened it for photography. XLR cable 1.5m1 interconnect cable with the notation OFC AUDIO. XLR12C (male) - XLR311C (female) RoHS compliant (Hiura Katsuji)
Maintenance information: 2023.9.28 continuity confirmed
Accessories: none
The price has been drastically reduced. 2021.6.23 sales price 49,800 yen ※Conductivity has been confirmed, but since the terminal has not been treated and the ground wire is broken, it is currently sold. Exclusive tone arm for DECCA MARK 1/2/3 cartridges. Simple structure using straight pipes. Since the needle pressure is a dedicated arm, it is preset and set to an appropriate value. It is designed to maintain an optimal state for the head of the company (Murakoshi Yoichi)
Maintenance Information: 2021.6.13 Continuity Confirmed
Accessories: armrest
Main specifications: static balance type, total length 303 mm, execution length 225 mm
The price has been drastically reduced. 2024/5/4 sales price 398,000 yen Glass panel brand new replacement included maintenance! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the sound appeal of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel dismantling and replacement, meter, illumination lamp replacement, in-board C deterioration replacement, RCA cleaning, SW, VOL cleaning, operation check, backup power supply transformer pattern, relay pattern solder crack correction)
Accessories: remote control, copy of instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is some paint peeling on the exterior (Kobayashi Hitoshi)
Accessories: none
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is a feeling of use on the exterior, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: none
The price has been drastically reduced! 2024/4/25 sales price 69,800 yen ※Currently sold. This is an AUDIO PHYSIC superwoofer. You can enjoy very powerful bass. The crossover can also be switched between 32/46/61/80/105 Hz, which is convenient. As for the exterior, there are line scratches, saran net holes, dull stains, etc. on the top plate. Serial 573 (Yonejima Satoshi)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: spikes, saran net
Main specifications: W260 x H625 x D400 mm 26 kg
The price has been drastically reduced. 2024/3/6 sales price 8,000 yen. This is an accuphase unbalanced (RCA terminal) line input board. There is dullness (Takasaki Atsushi)
Maintenance information: 2024.3.6 operation confirmed
Accessories: none
Main specifications: Compatible models/C-2000, C-245, C-265, CX-260, E-307, E-308, E-407, E-408, E-530, E-550, etc.
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
The price has been drastically reduced. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
The price has been drastically reduced. 2023/4/28 sales price 1,000 yen. ※1 bottle only. Jack Jack Cable 2.0m Studio and Stage Professional Cable There is no habit, and the tone is straightforward (Takasaki Atsushi)
Maintenance information: 2023.4.28 Conductivity confirmed
Accessories: none
※Operation has been confirmed, but since it is cheap, it will be handed over as is. This is a KENWOOD KA series amplifier. It has a compact and clean design, and can be placed horizontally or vertically. The sound quality is as clean as it looks, and it is recommended for those who want to enjoy music in a small space. Serial 61100061 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 3 input lines 12W+12W (8Ω) dimensions W171 x H67 x D207 mm weight 2 kg
The price has been drastically reduced! 2024/5/15 sales price 198,000 yen 800 Diamond series center speaker It is well connected to the Diamond Series due to unit groups that have evolved further from the previous game. High quality mid-range is reproduced. It is a cheap character that can be combined with other speakers for the center. There are thin threads on the exterior. Serial 12120002808 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: jumper cable
Main specifications: 2-way bass reflex drive unit 25mm diamond dome tweeter x 1, 165mm Woben Kevlar cone FST mid woofer x 1 playback frequency band 42Hz to 33kHz output sound pressure level 88dB nominal impedance 8Ω W486 x H279 x D287 mm weight 12.5 kg
The price has been drastically reduced. 2024/5/6 sales price 798,000 yen Strings adjusted in 2023/12. As you can see from its appearance, the stringed instruments and vocals are fascinating when you listen to them with their glossy and vivid playback sounds. Once the settings are decided, the sound image pops up in front of you, making you feel a unique sound. If you play with an amplifier with high torque, you can enjoy sound with a sense of scale that exceeds its size. There are several white line scratches on the exterior and side of the main body, but it is an individual with relatively little turbidity. Also, white stains are scattered on the side of the stand on one side. Serial 1659 (Mizushima Itsuro)
Maintenance information: 2023.12.7 maintenance (string adjustment)
Accessories: instruction manual
Main specifications: 2-way 2-speaker bass reflex 8Ω 88dB W190 x H380 (H890 stand part) x D375 mm weight 13.5 kg (stand part 36 kg)
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/23 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/21 sales price 99,800 yen with casters. This is Hayami's horizontal 5-tier audio rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: with KP-4CT casters (set of 2)
Main specifications: W1724 x H1300 x D580 mm approx. 169 kg
The price has been drastically reduced! 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (check capacitors, resistors, transistors, etc. as is OK. bias check)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
The CD mechanism has been replaced at Denon! Denon design series CD player. It is equipped with an inexpensive yet highly accurate D/A converter that is compatible with MP3 and WMA files. Since it can also be used vertically, it is attractive that it is easy to adjust where it is placed. The exterior is dull and has small scratches. Serial ADR 27190603014 (Tamura Eiji)
Maintenance information: 2024.5.16 manufacturer maintained
Accessories: remote control, power cable
Main specifications: analog output x 1, coaxial digital output x 1 size W200 x H86 x D 240 mm, weight 2.4 kg
The price has been drastically reduced. 2024/1/20 sales price 99,800 yen ※The output terminals have been remodeled and 1 system has been added. This D/A converter has an impressive natural and supple texture. Another DAC board has been added to lock up to 48kHz. Equipped with a TOS optical input terminal, it is equipped with an Analog Devices 20-bit resolution DAC chip. It contributes to a rich amount of information. Soft and warm sound (Sasaki Shota)
Maintenance information: 2024.1.20 Operation confirmed
Accessories: power cord, BNC conversion plug
Main specifications: 20 bit 8 times oversampling 32 kHz, 44.1 kHz, 48 kHz digital input = BNC3 system, optical 1 system digital output = BNC1 system, TOS optical 1 system analog output = RCA1 system size W483 x H65 x D312 mm 5.5 kg
The price has been drastically reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
The price has been drastically reduced! 2024/5/13 sales price 108,000 yen Speaker from Taiwanese manufacturer Usher Audio with a unique design. The mid to high frequencies are delicate and stretchy, and the low frequencies have an attractive, bouncy, and tense sound. It is a model that works very well with current pop and piano sounds when played clearly with a powerful amplifier. There is a feeling of use on the exterior such as small scratches and dullness (Asaine Tomoho)
Maintenance information: 2024.5.13 operation confirmed
Accessories: Saran net spike spike receiving jumper plate
Main specifications: 3-way 3-speaker bi-wire specification 8Ω 87dB 25Hz to 28,000 Hz W350 x H1250 x D650 mm 58.2 kg
The price has been drastically reduced. 2024/5/17 sales price 148,000 yen B&W middle class “tweeter on top” model from the new commercial series. You can enjoy high-response sounds and vivid and realistic spatial expressions. There is a large dent on one side and side, and there is a light feeling of use and dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: saran net, instruction manual
Main specifications: 8Ω 88dB 45Hz to 50kHz W200 × H403 × D301 mm weight 8.9 kg
The price has been drastically reduced! 2023/5/16 sales price 118,000 yen with LS STAND 70 (list price 48,000 yen). This model won the Audio Famous Equipment Award 2005 Speaker System Small Category Award. An excellent balance between the robustness of the enclosure and the suppleness of the unit group. A practical model with attractive spatial expressiveness and accurate sound images that don't make you aware of the presence of a speaker. There are scratches and bumps on the exterior. Serial 37038E002557/37038E002558 (Yonejima Satoshi)
Maintenance information: 2024.5.15 sweep test good
Accessories: instruction manual saran net spike fixing screw
Main specifications: 2-way bass reflex woofer 115mm aluminum hybrid cone tweeter JETIII crossover frequency 3,000 Hz input rating 70W/maximum 90W frequency characteristics 42-50,000 Hz efficiency 86dB impedance 4Ω dimensions W123 x H208 x D282 mm (when grille attached) weight 6.5 kg LS STAND 70: H700 x W240 x D290 mm top plate W75 × D210mm weight 6kg/set
Maintained! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The exterior has a feeling of use such as dullness and small scratches. Serial 44A12 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (main volume A curve replaced with the original vacuum tube 12AX7 noise replacement oil capacitor 0.01 μF domestically manufactured in the USA) replacement block capacitor 40/20/20/1000 μF other defective and deterioration replacement electrolytic capacitor 1000 μF additional electrolytic capacitor 40 μF other deterioration replacement switching noise reduction measures 1/4 W additional resistance 1/2 W deterioration replacement short (Additional pin vacuum tube socket, RCA jack caulk repair, and other operation checked with AC 100 to 117 V)
Accessories: A copy of the English instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)